Digitus DS-30105 User manual

SATA III PCI Express Card,
2-port
Quick Installation Guide
DS-30105

2
1. Introduction
The DIGITUS PCI Express SATA Card expands the PC with 2 internal or
2 external SATA ports. Various devices can be connected to this card,
such as SSDs, hard disks, DVD drives and more. This card enables the
use of the latest and fastest hard disks with 6 Gbit/s and also offers
backwards compatibility with older SATA drives with 1.5 Gbit/s or
3 Gbit/s. In addition, PCI Express 2.0 doubles the range of the existing
PCI express bus for a faster data transmission rate. Each PCI Express 2.0
lane offers a capacity of up to 500 MB/s.
2. Feature
1. 2-Port SATA 6.0 Gb/s
2. 1 x PCI Express Rev. 2.0
3. Four independent serial ATA channels for simultaneous
connection of one serial ATA device on each channel
4. Supports Native Command Queueing (NCQ)
5. Supports ECRC and Advanced Error Reporting
6. Supports: Windows XP /Vista /Server 2003 /Server 2008,
Windows 7, Windows 8, Windows 8.1,
Windows 10 (32 / 64bit), Linux
3. Package Content
PCI Express Card
Low-profile bracket
QIG

3
4. Hardware Description
There are four SATA ports available on the SATA 6G PCIe Card,
2 internally SATA connectors and 2 eSATA connectors externally.
Based on the image below, the respective ports have been name Conl1
through Con4. Con3 & Con4 are internal SATA ports, while Con1 and
Con2 are external SATA ports. By changing the jumper setting on the
SATA 6G PCle Card circuit board, you will be able to utilize two of the
ports simultaneously. Please designate which ports you wish to use, by
adjusting jumper setting according to the chart below. By default,
Con3 & 4 are working.

4
Jumper Settings (Default Mode: 2 ~ 3 close)
J (Jumper Settings)
JP
Description
Active Port
J1 J2 J3 J4
2-3 Close
Enable SATA Port (Con3 , Con4)
J5 J6 J7 J8
2-3 Close
J1 J2 J3 J4
1-2 Close
Enable eSATA Port (Con1 , Con2)
J5 J6 J7 J8
1-2 Close
J1 J2 J3 J4
2-3 Close
Enable SATA Con3, eSATA Con2
J5 J6 J7 J8
1-2 Close
J1 J2 J3 J4
1-2 Close
Enable eSATA Con1, SATA Con4
J5 J6 J7 J8
2-3 Close

5
5. Hardware verify
Verifying for Windows XP / Vista / 7
1. Right click My Computer and click Manage
2. Select Device Manager
3. Look for the following
Windows® xp: Double click SCSI and RAID Controller：
ASMedia 106X SATA Controller should be displayed
Windows® Vista / 7: Double click IDE ATA / ATAPI Controllers：
ASMedia 106X SATA Controller should be displayed
Hereby Assmann Electronic GmbH declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany