Digitus DS-30020-1 User manual

PARALLEL I/O, 1-PORT
PCI EXPRESS ADD-ON CARD
User Manual
DS-30020-1

Features and Benefits
1. Compliant with PCI Express Base spec 1.1
2. Compliant with PCI Power Management
3. Add one IEEE1284 Parallel port on system
4. Supports Standard Parallel Port (SPP), Enhanced Parallel Port
(EPP1.9) & Enhanced Capability Port (ECP)
5. Data transfer rate up to 2.5Mbps
PCI-Express x1
DB25 female connector x 1
System Requirements
Windows®2000, Sever 2003 / CE / XP / Vista / Win 7 / Win 8 /
Win 8.1 / Win 10 / Linux
PCI Express-enabled system with an available PCI Express slot
Package Contents
1 x 2-Port Serial Interface Card, PCIe
1 x Low profile bracket
1 x Manual
1 x Driver CD
Hardware Installation
1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector
with the selected PCIe slot on the motherboard. Push the
board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.

Driver Installation
Different systems please select its corresponding driver files
1. Insert the Driver CD into the CD-ROM drive.
2. At the Found New Hardware Wizard, select Locate
DS-30020-1\DS-30020-1_CD\Driver
4. Press “Install” button to install the drivers.
5. Click Close to complete the driver installation.
6. Restart the PC.
7. Once the system gets booted the Windows will automatically
matching the device driver
To Verify Windows®Driver Installation
Click on the Device Manager tab in System Properties, which you
access from the Windows Control Panel. You should see one PCI
Express ECP Parallel Port … installed under Ports (COM & LPT)
item
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of
Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of
conformity can be requested by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment. In
this case, the user can be requested to undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany