Digitus DS-30221-1 User manual

USB 3.0, 4-PORT
PCI EXPRESS ADD-ON CARD
User Manual
DS-30221-1

Features
Fully compliant with PCI Express Base Specification Revision 2.0
Single-lane (x1) PCI Express throughput rates up to 5Gbps
Compliant with Universal Serial Bus 3.0 specification Revision 1.0
Supports simultaneous operation of multiple USB 3.0, USB 2.0 and
USB 1.1 devices Supports the following speed data rates as follows:
Low-speed (1.5Mbps) / Full-speed (12Mbps) / High-speed
(480Mbps) / Super-speed (5Gbps)
Supports 4 downstream ports for all speeds
Built-in 4-pin power connector for receiving extra power supply from
system
Hot-swapping feature allows you to connect/disconnect devices
without powering down the system
Support Windows®XP/Vista/7/8/10 (32/64 bit)
System Requirements
Windows®XP/Vista/7/8/10 (32/64 bit)
One available PCI Express slot (Recommend PCI Express 2.0)
Package Contents
1 x USB 3.0 4-Port PCI Express Card
1 x Driver CD
1 x User Manual
Hardware Description

Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector with the
selected PCIe slot on the motherboard. Push the board down
firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows®XP/Vista/Win7/8/10 (32/64 bit)
1. Please insert the CD driver bound with USB 3.0 4-Port PCI
Express Card into your CD-ROM Drive.
2. Follow the on-screen instructions to complete the installation.
To Verify Driver Installation
Click on the “Device Manager” tab in System Properties, which you
access from the Windows Control Panel. You should see a “VIA USB
3.0 Root Hub” and a “VIA USB eXtensible Host Controller” under
the “Universal Serial Bus controllers” item.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping
content. If the Declaration of Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany