Digitus DN-16026 User manual

WIRELESS 11N
HD IP CAMERA
Quick Installation Guide
DN-16026

1
Thank you for purchasing this IP Camera! Before you can use this camera,
please check the packaging contents. If any of them is missing, please
contact your dealer of purchase for help.
Item Name Q’ty Description
IP Camera 1 IP Camera
CD 1 Camera Windows Utility and Manual
Network Cable 1 Connects IP camera and your local area
AC power adapter 1 Provides electrical power to IP camera
Accessory Kit 1 Tripod Wall mount kit

2
IP Camera Installation
Step-by-Step
Plug the AC power
adapter into the electrical
outlet on the wall.

3
Connect the network
cable to the network
socket located at the
back of IP camera.
Insert the other end of AC
power adapter in the DC
power socket located at
the back of IP camera,
and then connect the
other end of network
cable to one of network
port of the switch / hub of
your local area network.

4
For first-time
configuration, you must
set your computer’s IP
address to 192.168.2.1
so you can connect to IP
camera.
Please click ‘Start’ button
and then click ‘Control
Panel’.
Click ‘View network
status and tasks’ under
‘Network and Internet’

5
If you didn’t see ‘Network
and Internet’ in control
panel, please look for
‘Network and Sharing
Center’ icon and
double-click it.
Click ‘Local Area
Connection’

6
Click ‘Properties’

7
Click ‘Internet Protocol
Version 4 (TCP/IPv4),
and then click ‘Properties’

8
Click ‘Use the following IP
address’, and then input
‘192.168.2.1’ in ‘IP
address’ and
‘255.255.255.0’ in Subnet
mask’, just like shown on
the left.
Click ‘OK’ when finish,
and close all open
windows you opened.
Launch Internet Explorer
web browser and input
‘192.168.2.3’ in address
bar, then press enter key.

9
You’ll be prompted to
input username and
password.
Input ‘admin’ as
username, and
‘1234’ as password, then
click ‘OK’.
If you didn’t see this
window, please recheck
all previous steps to
make sure your IP
camera is connected to
your network.

10
For first-time use please
click ‘Download ActiveX’
link to download ActiveX
plugin for your computer.
Click ‘Run’ when you’re
prompted.

11
Click ‘Run’ when your see
Internet Explorer’s
security warning.
Click ‘Yes’ when you’re
prompted by Windows’
user account control.

12
Click ‘Next’ to continue.
Answer ‘Next’ and ‘Install’
in all setup procedures to
complete software
installation.

13
Click ‘Finish’ button when
you see it.
Now back to Internet
Explorer web browser
and press ‘F5’ key on
your keyboard, you’ll be
prompted when the
message like shown on
the left.

14
Right-click on the
message, and click ‘Run
Add-on’
Click ‘Run’ when you’re
prompted.
You should be able to see
the IP camera’s video on
your computer now. If not,
please go back to
previous steps and check
for any possible problem,
or contact your dealer of
purchase for help.