Dimplex WPM 2008 R User manual

Bedienungsanleitung
für den Benutzer
DeutschEnglishFrançais
Manuel d’utilisation
à l‘usage de l‘utilisateur
Operating instructions
for users
Wärmepumpen-
Manager
für Nieder-, Mittel- und
Hochtemperatur–Wärme-
pumpen zum Heizen und
Kühlen
WPM 2008 R
Heat pump
manager
for low, medium and high
temperature heat pumps
for heating and cooling
Gestionnaire de
pompe à chaleur
pour pompes à chaleur
à température basse,
moyenne ou haute
pour le chauage et
le rafraîchissement
Bestell-Nr. / Order no. / Node commande : 452114.66.53 FD 8801

Einstellung der Sprache
 MENUE-Taste für einige Sekunden gedrückt halten
 Auswahl des Menüpunktes 1 Einstellungen mit den Pfeiltasten
(⇑und ⇓) und bestätigen durch Drücken der ENTER-Taste (↵)
 Auswahl des Untermenüpunktes Sprache mit den Pfeiltasten
(⇑und ⇓) und bestätigen durch Drücken der ENTER-Taste (↵)
bis Cursor zum Einstellwert springt
 Gewünschte Sprache mit Pfeiltasten (⇑und ⇓) einstellen
 Gewählte Sprache mit ENTER-Taste (↵) bestätigen oder durch
die ESC-Taste verwerfen
How to set the desired language
 Hold MENUE button depressed for several seconds
 Select the 1 Einstellungen menu item with the arrow buttons
(⇑and ⇓) and confirm by pressing the ENTER button (↵)
 Select the Sprache submenu item with the arrow buttons
(⇑and ⇓) and confirm by pressing the ENTER button (↵)
 Set the desired language with the arrow buttons (⇑and ⇓)
 Confirm the selected language with the ENTER button (↵)
or revoke with the ESC button
Réglage de la langue
 Tenir appuyée la touche MENU pendant quelques secondes
 Sélectionnerl’option1Einstellungenaveclestouchespourvues
de flèches (⇑et ⇓) puis confirmer avec la touche ENTREE (↵)
 Sélectionner l’option Sprache avec les touches pourvues de
flèches (⇑et ⇓) puis confirmer avec la touche ENTREE (↵)
 Régler la langue souhaitée avec les touches pourvues
de flèches (⇑et ⇓)
 Confirmer la langue avec la touche ENTREE (↵) ou rejeter la
sélection avec la touche ECHAP
Nastavení jazyka
 Stiskněte na několik sekund klávesu MENU.
 Zvolte bod menu 1 Einstellungen pomocí kláves se šipkami
(⇑a ⇓) a potvrďte jej stisknutím klávesy ENTER (↵).
 ZvoltebodpodmenuSprachepomocíklávessešipkami(⇑a⇓)
a potvrďte jej stisknutím klávesy ENTER (↵), dokud nepřeskočí
kurzor na nastavení hodnoty.
 Nastavte potřebné jazyky pomocí kláves se šipkami (⇑a ⇓).
 Potvrďte zvolené jazyky klávesou ENTER (↵) nebo je zrušte
klávesou ESC.
Impostare la lingua
 Tenere premuto per qualche secondo il pulsante MENUE
 Selezionare la voce di menu 1 Einstellungen con i pulsanti a
freccia (⇑e ⇓), confermare premendo il pulsante INVIO (↵)
 Selezionare la voce sottomenu Sprache con i pulsanti a freccia
(⇑e ⇓), confermare premendo pulsante INVIO (↵) finché il
cursore si troverà sul valore dell’impostazione
 Settare la lingua desiderata con i pulsanti a freccia (⇑e ⇓)
 Con il pulsante INVIO (↵) confermare la lingua selezionata
oppure annullare con il pulsante ESC.
De taal instellen
 De MENU-toets enkele seconden ingedrukt houden
 Het menupunt 1 Einstellungen met de pijltjestoetsen (⇑en ⇓)
selecteren en bevestigen door middel van de ENTER-toets (↵)
 Het submenupunt Sprache met de pijltjestoetsen (⇑en ⇓)
selecteren en bevestigen door middel van de ENTER-toets (↵)
tot de cursor naar de instellingswaarde springt
 De gewenste taal met de pijltjestoetsen (⇑en ⇓) instellen
 De geselecteerde taal met de ENTER-toets (↵) bevestigen of
door de ESC-toets afwijzen
Inställning av språk
 Håll MENY-tangenten intryckt några sekunder
 Välj menyposten 1 Einstellungen med piltangenterna (⇑och ⇓)
och bekräfta genom att trycka på ENTER-tangenten (↵)
 Välj undermenyposten Sprache med piltangenterna (⇑och ⇓)
och bekräfta genom att trycka på ENTER-tangenten (↵)
till dess att markören flyttar sig till ”Inställningsvärde”
 Ställ in önskat språk med piltangenterna (⇑och ⇓)
 Bekräfta det valda språket med ENTER-tangenten (↵) eller välj
bort det med hjälp av ESC-tangenten
Nastavitev jezika
 MENI -Tipko držimo nekaj sekund pritisnjeno.
 Izbiro tipk za meni 1 Einstellungen s pomočjo tipk (⇑in ⇓) in
potrjujemo s pomočjo tipke ENTER- (↵).
 Pojem izbiramo s pomočjo tipk označenih s puščico (⇑in ⇓)
inpotrjujemo spomočjotipkeENTER-(↵),doklerse puščica ne
postavi na izbrano mesto.
 Želeni jezik uravnavamo s tipkama (⇑in ⇓).
 Izbrani jezik s tipko ENTER- (↵) potrdimo ali s tipko ESC
odklonimo.
Ustawienia j zyka
 Przycisk MENU wcisnąć i przytrzymaćna kilka sekund
 Wybór punktu menu 1 Einstellungen przy pomocy klawiszy
strzałek (⇑i ⇓) i potwierdzenie wciśnięciem klawisza
ENTER (↵)
 WybórpunktupodmenuSprache przypomocyklawiszystrzałek
(⇑i ⇓) i potwierdzenie wciśnięciem klawisza ENTER (↵) aż
kursor przeskoczy na wartość ustawianą
 Ustawićpożądany język klawiszami strzałek (⇑i ⇓)
 PotwierdzićpożądanyjęzykklawiszemENTER(↵)lubporzucić
wciśnięciem klawisza ESC
语言设置
 按住菜单键几秒钟
 菜单点项的选择 "1 Einstellungen" 调上下箭头键
(⇑ 和 ⇓)，然后按确认键(↵)确认
 次级菜单点项的选择 "Sprache" 调上下箭头键(⇑ 和 ⇓)，
然后按确认键(↵)直到光标跳到调整值
 调上下箭头键(⇑ 和 ⇓)来设置所需语言
 用确认键(↵)来确认所选语言，或者通过ESC-键拒绝对这个
语言的选择。
Definição do idioma
Manter a tecla MENUE premida durante alguns segundos

Selecção do ponto do menu 1 Einstellungen através das teclas
de setas (⇑e ⇓) e confirmar premindo a tecla ENTER (↵)
Selecção do ponto do submenu Sprache das teclas de
setas (⇑e ⇓) e confirmar premindo a tecla ENTER (↵)
até o cursor saltar para o valor de definição

Definir o idioma pretendido através das teclas de setas (⇑e ⇓)
Confirmar o idioma seleccionado através da tecla ENTER (↵)
ou cancelar através da tecla ESC
Seleccionar el idioma
Mantener pulsada la tecla MENUE durante algunos segundos
Seleccionar la opción 1 Einstellungen con las teclas de flecha
(⇑y ⇓) y confirmar pulsando la tecla ENTER (↵)
Seleccionar la subopción Sprache con las teclas de flecha
(⇑y ⇓) y confirmar pulsando la tecla ENTER (↵) hasta que el
cursor salte al valor de ajuste
Configurar el idioma deseado con las teclas de flecha (⇑y ⇓)
Confirmarel idioma elegidocon la tecla ENTER (↵) o desechar
la selección de idioma pulsando la tecla ESC
DE
GB
FR
SI
IT
SE
CZ
PL
RC
PT
ES
NL

E-1
English
Table of Contents
Table of Contents
1 General Information........................................................................................................................................E-2
2 Heat Pump Manager .......................................................................................................................................E-2
3 Quick Reference Instructions........................................................................................................................E-3
3.1 Selection of the Operating Mode................................................................................................................................................... E-3
3.2 Changing the Settings................................................................................................................................................................... E-3
3.3 Settings and Operating Data......................................................................................................................................................... E-3
4 Operation.........................................................................................................................................................E-4
5 Operating Modes.............................................................................................................................................E-5
6 Adjustment of Heating Operation..................................................................................................................E-5
7 DHW Heating ...................................................................................................................................................E-6
7.1 Shut-Off Times for DHW Preparation............................................................................................................................................ E-6
7.2 Thermal Disinfection ..................................................................................................................................................................... E-6
8 Menu Structure................................................................................................................................................E-7
8.1 Settings......................................................................................................................................................................................... E-7
8.2 Operating Data............................................................................................................................................................................ E-11
8.3 History......................................................................................................................................................................................... E-13
9 Displays .........................................................................................................................................................E-14
9.1 Normal Operating Statuses......................................................................................................................................................... E-14
9.2 Fault Messages........................................................................................................................................................................... E-16

E-2
English
1
1 General Information
For installation, operation and maintenance refer to the
installation and operating instructions. This unit should only be
installed and repaired by an experienced technician. Poorly
carried out repairs can endanger the safety of the user.
According to current regulations, the installation and operating
instructions must always be available and should be handed to
the technician working on the device for his/her information.
Should ownership change, these installation and operating
instructions must be passed on to the new user or owner. Do not
connect the device if it is visibly damaged. In this event, ask the
supplier for advice. Ensure that only original spare parts are used
to prevent consequential damage. All environmentally-relevant
requirements regarding the recovery, recycling and disposal of
materials and components should be observed in accordance
with the applicable standards.
Regulations and Safety Information!
Any adjustments to the settings within the device may only
be carried out by an authorised technician<.
The heat pump manager should only be operated in dry
rooms with temperatures ranging between 0 °C and 35 °C.
Ensure that no condensation forms on the device.
To ensure that the antifreeze function of the heat pump
works properly, the heat pump manager must remain
connected to the power supply and the flow must be
maintained through the heat pump at all times.
2 Heat Pump Manager
The heat pump manager is essential for operation of air-to-water,
brine-to-water and water-to-water heat pumps. It regulates a
bivalent, monovalent or mono energy heating system and
monitors the safety components in the refrigerating circuit. The
heat pump manager is either installed in the heat pump casing or
is delivered with the heat pump as a wall-mounted controller. It
carries out regulation of both the heating system (radiators and
circulation pump) and the heat source system.
Overview of functions
Convenient 6-button operation
Large and clear illuminated LC display with indicators for
operating status and service information
Conforms with utility company requirements
Dynamic menu navigation, customised for the configured
heat pump system
Remote control interface with identical menu navigation
Return temperature-controlled regulation of heating
operation based on external temperature, adjustable fixed-
setpoint or room temperature
Control of up to 3 heating circuits
Priority switching
– Cooling first
– DHW preparation first
– Heating first
– Swimming pool
Control of a 2nd heat generator
(oil or gas boiler, or immersion heater)
Control of a mixer for a 2nd heat generator (oil, gas, solid
fuel boiler, or renewable heat source)
Special program for a 2nd heat generator to ensure
minimum runtimes (oil boiler) or minimum heating times
(main cylinder)
Control of a flange heater for targeted reheating of domestic
hot water with adjustable time programs, and for thermal
disinfection
Optional control of up to 5 circulating pumps
Defrost management system to minimise the energy
required for defrosting using variable, self-adjusting
defrosting cycle times
Compressor management system to ensure balanced
loading of the compressors for heat pumps with two
compressors
Operating hours counter for compressors, circulating
pumps, 2nd heat generator and flange heater
Keyboard block, child lock
Alarm memory with time and date
Interface for communication via PC with optional display of
heat pump parameters
Automatic program for targeted heat drying of screed floors
and saving the start and finish times

E-3
English
Quick Reference Instructions 3.3
3 Quick Reference Instructions
3.1 Selection of the Operating Mode
3.2 Changing the Settings
Hold the MENU button depressed for several seconds
Select the desired menu item with the arrow buttons
(⇑and ⇓)
Confirm by pressing the ENTER button (↵)
Select the desired submenu item with the arrow buttons
(⇑and ⇓)
Confirm with the ENTER button (↵) until cursor jumps to the
setting
Change the setting to the desired value with the arrow
buttons (⇑and ⇓)
Confirm new value with the ENTER button (↵) or revoke with
the ESC button
3.3 Settings and Operating Data
Menu for setting system-specific parameters (see Chap. 8 on p.
7). Dynamic menus hide non-essential settings.
Heating characteristic curves (see Chap. 6 on p. 5)
The heating characteristic curve can be adjusted to individual
temperature requirements using the Warmer/colder buttons on
the main display. Increase or reduce the temperature with the ⇑/
⇓buttons. For heating circuit 2/3, make this setting in the menu
“Heating circuit 2/ Heating circuit 3”.
DHW heating (see Chap. 7 on p. 6)
Besides the hot water temperature, a shut-off-time for the DHW
heating can be set in the menu item “Settings – Domestic hot
water”. This can be used to switch DHW preparation e.g. to the
night hours. There is also the option of time-controlled reheating
of domestic hot water using a flange heater.
Operating data menu (see Chap. 8.2 on p. 11)
Display of measured sensor values
History menu (see Chap. 8.3 on p. 13)
Display of runtimes and stored data (e.g. faults)
Displays (see Chap. 9 on p. 14)
Select the desired operating mode by repeatedly pressing the modus button (text message). The operating mode will change 10
seconds after altering the setting (symbol changes on the display).
Cooling The system operates in cooling operation.
Summer Domestic hot water heating and swimming pool water heating only. Antifreeze (frost protection) is ensured.
Auto Programmed raising and lowering times are automatically activated.
Vacation Temperature reduction and domestic hot water block for an adjustable time period.
Party A programmed lowering of the heating characteristic curves is overridden.
Heat generator 2 Heat pump is blocked. Heat is generated by the 2nd heat generator.
Time Sets the time and activates an automatic
summer/winter changeover.
Operation Various operating mode settings available
(see Chap. 3.2 on p. 3)
Heating circuit 1 Settings for heating circuit 1
Heating circuit 2 Settings for heating circuit 2
Heating circuit 3 Settings for heating circuit 3
Cooling Settings for cooling operation
Domestic hot
water Settings for DHW preparation
Swimming pool Settings for swimming pool heating
Date Sets the date
(required for leap years only)
Language Sets the language desired
for menu navigation
Display of the current operating status of the heat pump
system
Fault messages: (ESC button flashes)
- HP fault Indication of a fault in the heat pump.
Inform your after-sales service.
- Plant fault Indication of a fault or an incorrect
setting in the system. Inform your local
technician.
- Short-circ.
or break This can be caused by a breakage or a sensor which is short circuiting. Inform
your local technician.

E-4
English
4
4 Operation
The heat pump manager is operated using 6 keys: Esc,
Modus, Menu, ⇓, ⇑, ↵. Different functions are assigned to
these buttons according to the current display (Standard or
Menu).
The operating status of the heat pump and the heating
system is indicated in plain text on a 4 x 20 character LC
display (see Chap. 9 on p. 14).
6 different operating modes can be selected:
Cooling, Summer, Auto, Party, Vacation, 2nd heat
generator.
The menu consists of 3 main levels:
Settings, Operating data, History
(see Chap. 6 on p. 5)
Fig. 4.1: Standard LC display - main display with operator buttons
NOTE
Contrast:
The display can be adjusted for contrast. Do this by depressing the
buttons (MENU) and (↵) at the same time until the adjustment process
has been completed.
Increase the contrast by simultaneously pressing the (×) button. Reduce
the contrast by pressing the (Ø) button.
NOTE
Keyboard block, child lock!
Toprevent unintentional adjustmentofthe heatpump manager,press the
button (Esc) for approx. 5 seconds until KEY BLOCK ACTIVE appears on
the display. Cancel the keyboard block using the same procedure.
Tab. 4.1: Operator button functions
[FKDUDFWHUGLVSOD\
%DFNOLW
2SHUDWLQJPRGH
V\PEROV
%XWWRQIXQFWLRQV
6WDWXVGLVSOD\+3
OLQH
+HDWLQJZDUPHUFROGHU
LQGLFDWRUEDUOLQH
Button Standard display (Fig. 4.1 on p. 4)Change of setting (Chap. 8 on p. 7)
Esc Activates or deactivates the keyboard block
Acknowledges a fault
Exits the menu and returns to the main display
Returns from a submenu
Exits a setting without saving changes
Operation Selects the operating mode (see Chap. 5 on p. 5)No action
Menu Jumps to menu No action
⇓Shifts the heating curve downwards (colder) Scrolls downwards between menu items on one level
Changes a setting in a downward direction
⇑Shifts the heating curve upwards (warmer) Scrolls upwards between menu items on one level
Changes a setting in an upwards direction
↵No action Selects a setting in the corresponding menu item
Exits a setting and saves changes
Jumps to a submenu

E-5
English
Operating Modes 6
5 Operating Modes
6 different operating modes can be selected using the button
(Modus). There is a time delay between switching modes. The
operating mode can be changed each time the button is pressed
in the order shown below.
NOTE
Heat pump operation block
The heat pump is blocked in the 2nd heat generator operating mode.
Heating operation and DHW preparation in mono energy systems is
carried out using electric heating elements. In the case of bivalent
systems, the 2nd heat generator is used.
6 Adjustment of Heating Operation
During start-up, the heating characteristic curve is adjusted to
suit the building and local conditions. This heating characteristic
curve can be adjusted to individual temperature requirements
using the Warmer/Colder arrow buttons on the main display.
Increase the temperature with the ⇑button. The indicator bar in
the last line will move to the right.
Decrease the temperature with the ⇓button. The indicator bar in
the last line will move to the left.
For heating circuits 2/3, make this setting in the “Heating circuit
2/3” menu.
The set heating characteristic curves can be lowered or raisedon
a time-controlled basis. For example, in poorly insulated
buildings the heating characteristic curve can be lowered, or
raised before the shut-off time to prevent significant cooling of
the heating surfaces.
If the raising and lowering operations overlap each other, the
raising operation has priority.
NOTE
Energy-efficient operation
For energy-efficient operation of the heat pump heating system, the
temperature level to be generated by the heat pump should be as low as
possible.
In well-insulated buildings, constant heating operation without lowering
times will normally result in lower energy costs. This is because power
peaks with high flow temperatures are avoided and the same degree of
comfort is attained at lower temperatures.
Shut-off times can be compensated for by a temperature rise that begins
1 hour before the shut-off time takes effect.
COOLING
Selectable only when the
cooling controller is
connected
(see Installation and
Start-up)
The system operates in cooling operation. The individual control functions are active. This
operating mode can only be activated if a cooling controller is connected to the heat pump
manager and the cooling function has been enabled in the preconfiguration.
SUMMER Only domestic hot water and swimming pool water are heated up in the SUMMER operating
mode. Space heating is not activated. Antifreeze (frost protection) is ensured.
AUTO The heat pump operates in automatic operation. Programmed lowering times, raising times and
shut-off-times for heating and DHW heating are activated automatically. DHW heating, heating
and swimming pool heating are activated according to priority. The heat pump and the 2nd heat
generator are switched on or off as required.
VACATION
(lower operation) A lowering of the heating characteristic curves and a hot water block are activated in the VACATION operating mode. Both functions are independent of any relevant timings, but the
lower values set for these functions still apply. The duration of the VACATION operating mode
can be set in the menu “1 Settings – Operation – Vacation mode”. After this time period has
elapsed, the system switches automatically back to automatic operation again.
PARTY
(daytime operation) A programmed lowering of the heating characteristic curves is overridden in the PARTYoperating mode. The duration of the PARTY operating mode can be set in the menu “1 Settings –
Operation – Party mode”. After this time period has elapsed, the system switches automatically
back to automatic operation again.
2nd heat generator
(HG2) The heat pump is switched off in this operating mode and the entire heat supply is provided by the 2nd heat generator (HG2). This is the immersion heater in mono energy systems. In bivalent
systems it is the oil or gas heating. Time programs and heating curve settings remain active.

E-6
English
7
7 DHW Heating
The heat pump manager automatically calculates the maximum
possible hot water temperature in heat pump operation. The
desired domestic hot water temperature can be set in the menu
“Settings – Domestic hot water – Hot water set temp”.
Hot water temperature - HP maximum
To attain the highest possible heat pump ratio during DHW
preparation, the controller automatically calculates the maximum
possible hot water temperature in heat pump operation based on
the current heat source temperature. The lower the heat source
temperature (e.g. external temperature, brine temperature), the
higher the attainable hot water temperature.
Hot water cylinder without flange heater
If the hot water set temperature exceeds the maximum attainable
domestic hot water temperature in heat pump operation, DHW
preparation is terminated once the so-called HP maximum
temperature is reached.
Hot water cylinder with flange heater
If the hot water set temperature exceeds the maximum attainable
hot water temperature in heat pump operation, DHW preparation
with the heat pump is terminated once the so-called HP
maximum temperature is reached, and the desired hot water
temperature is attained by reheating using the flange heater.
NOTE
Reheating with flange heater
After DHW preparation with the heat pump, the water can be further
heated to higher temperatures if the system is provided with a flange
heater. DHW heating does not take place again until the HP maximum
temperature is undershot. This ensures that basic heating can be carried
out by the heat pump.
7.1 Shut-Off Times for DHW Preparation
Besides the hot water temperature, shut-off-times for DHW
heating can also be programmed in the menu item “Settings –
Domestic hot water –Hot water block’’. No DHW heating is
carried out during this period.
If a sufficiently large cylinder is available, we recommend
carrying out DHW heating or reheating during the night-time
hours. This means that the more favourable low tariff periods
normally available can be utilized.
7.2 Thermal Disinfection
In the menu item “Settings – Domestic hot water – Therm.
Disinfection”, it is possible to carry out a thermal disinfection
with hot water temperatures of up to 85 °C in bivalent systems or
systems with hot water cylinders and integral flange heater. The
thermal disinfection can be carried out for each day of the week.
The start time is selectable.

E-7
English
Menu Structure 8.1
8 Menu Structure
8.1 Settings
All user settings are made in the “Settings” menu item.
The following table shows not only the menu structure and
explanations in the right-hand column, but also the
corresponding setting ranges. Values in bold print indicate the
factory settings.
You can access the settings menu by:
Pressing the button (MENU) for approx. 5 seconds
Confirming the settings menu item with the ENTER button.
NOTE
Dynamic menus
The following contains a description of the complete menu. During start-
up, the regulatory functions and the menu structure are adjusted to the
specific system. Non-relevant menu items are then hidden according to
these settings.
Example: Settings for DHW preparation can only be made if the “DHW
preparation” menu item is configured with “Yes” in the preconfiguration.
Abbreviations:
HG2 = 2nd heat generator (e.g. boiler)
 System-specific parameters Setting range
 Menu for setting the time. An automatic changeover from daylight
saving time (summer) to winter time can be selected. International 24 h display
 Level for setting operating modes
  Selects the operating mode
It is also possible to make changes directly using the modus
button.
Summer
Auto
Party
Vacation
HG2
Cooling
 
  
Duration of party mode in hours
After the set period has elapsed, the system returns automatically
back to automatic operation again.
0
to 4to
72
 
  
Duration of vacation mode in days
After the set period has elapsed, the system returns automatically
back to automatic operation again.
0
to 15 to
150
   Settings for heating circuit 1
  
  
Sets the desired room set temperature when room temperature
regulation is selected 15.0°C
to 20.0 °C to
30.0°C
  

Settings to lower the heating characteristic curve of heating circuit
1
 


Sets the time during which the temperature in heating circuit 1 is to
be lowered 00:00
to
23:59
 
 
Sets the temperature value by which the heating characteristic
curve of heating circuit 1 is to be lowered when the temperature is
lowered
0K
to
19K
 
  
For each day of the week, it is possible to select whether Time1,
Time2, no time or both times are to be active when the
temperature is lowered. Operations to lower the temperature that
exceed a weekday are activated or deactivated at the end of each
day accordingly.
N
T1
T2
Y
  

Settings to raise the heating characteristic curve of heating circuit
1
 


Sets the time during which the temperature in heating circuit 1 is to
be raised. 00:00
to
23:59
 
 
Sets the temperature value by which the heating characteristic
curve of heating circuit 1 is to be raised. 0K
to
19K

E-8
English
8.1
 
  
For each day of the week, it is possible to select whether Time1,
Time2, no time or both times are to be active when the
temperature is raised. Operations to raise the temperature that
exceed a week day are activatedor deactivated at the end of each
day accordingly.
N
T1
T2
Y
   Settings for heating circuit 2/3

 
Parallel shift of the set heating curve for heating circuit 2/3. By
pressing the arrow buttons once, the heating curve is shifted by
1°C upwards (hotter) or downwards (colder).
Indicator bar
  

Settings to lower the heating characteristic curve of heating circuit
2/3
  


Sets the time during which the temperature in heating circuit 2/3 is
to be lowered. 00:00
to
23:59
  
 
Sets the temperature value by which the heating characteristic
curve of heating circuit 2/3 is to be lowered when the temperature
is lowered
0K
to
19K
  
  
For each day of the week, it is possible to select whether Time1,
Time2, no time or both times are to be active when the
temperature is lowered. Operations to lower the temperature that
exceed a week day are activatedor deactivated at the end of each
day accordingly.
N
T1
T2
Y
  

All settings to raise the heating characteristic curve of heating
circuit 2/3
 


Sets the time during which the temperature in heating circuit 2/3 is
to be raised. 00:00
to
23:59
 
 
Sets the temperature value by which the heating characteristic
curve of heating circuit 2/3 is to be raised when the temperature is
raised.
0K
to
19K
 
  
For each day of the week, it is possible to select whether Time1,
Time2, no time or both times are to be active when the
temperature is raised. Operations to raise the temperature that
exceed a week day are activatedor deactivated at the end of each
day accordingly.
N
T1
T2
Y
 Settings for cooling operation
 
  
Sets the desired return set temperature when dynamic cooling is
selected 10°C
to 15°C to
30°C
 
   
Sets the room set temperature for silent cooling
The actual value is measured by room climate control station 1 15.0°C to 20.0°C to
30.0°C
 

Sets the time programs for dynamic cooling
  


Sets the times during which dynamic cooling is blocked 00:00
to
23:59
  
  
For each day of the week, it is possible to select whether Time1,
Time2, no time or both times are to be active for a block. Blocks
that exceed a weekday are activated or deactivated at the end of
each day accordingly.
N
T1
T2
Y
   Sets DHW preparation
  
   
Sets the desired hot water temperature 30°C
to 45 °C to
85°C
 System-specific parameters Setting range