Dimplex Ignite 50 User manual
Owner’s Manual
Model's
Ignite 50" / XLF50-EU
Ignite 74" / XLF74-EU
Ignite 100" / XLF100-EU
08/53801/0 Iss 2
OCN 10886
The product complies with the European Safety Standards EN60335-2-30 and the European Standard
Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3. These cover the essential
requirements of EEC Directives 2006/95/EC and 2004/108/EC
EN DE NL FR RO IT PL ES
EN : This product is only suitable for well insulated rooms or occasional use. DE :
Dieses Produkt ist nur für gut isolierte Bereiche oder gelegentliche Verwendung
geeignet. FR : Ce produit convient uniquement à des endroits bien isolés ou pour un
usage occasionnel. IT : Questo prodotto è adatto solo per spazi ben isolati o per uso
occasionale. ES : Este producto sólo es adecuado para espacios bien aislados o un
uso ocasional. NL : Dit product is uitsluitend geschikt voor goed geïsoleerde ruimten
egnet til velisolerede rum eller lejlighedsvis brug. PT : Este produto somente é adequado
para espaços bem isolados ou uso ocasional. SE : Denna produkt är endast avsedd för
välisolerade utrymmen eller tillfällig användning. FI : Tämä tuote soveltuu ainoastaan
terekhez vagy eseti használatra alkalmas. SV : Denna produkt är endast lämplig för
användning i väl isolerade utrymmen eller enstaka användning.
2
Table of Contents
! NOTE: Procedures and tech-
niques that are considered important
enough to emphasize.
CAUTION: Procedures and tech-
niques which, if not carefully followed,
will result in damage to the equip-
ment.
WARNING: Procedures and
techniques which, if not carefully
followed, will expose the user to
death.
Welcome & Congratulations . . . . . . . . . . . . . . . . . . 3
IMPORTANT INSTRUCTIONS ..................4
Quick Reference Guide ......................6
Fireplace Installation ........................7
Operation ................................ 11
Maintenance .............................15
3
Welcome & Congratulations
Dimplex. Please take note of the location of the Model & Serial for this
product it is important to be able to locate it in the event of requiring
technical support.
Model and Serial
Number Label
Please carefully read and save these instructions.
CAUTION: Read all instructions and warnings carefully before
starting installation. Failure to follow these instructions may result in
4
Important Safety Advice
When using electrical appliances, basic precautions should
If the appliance is damaged, check immediately with the
supplier before installation and operation.
Do not use this appliance in the immediate surroundings
of a bath, shower or swimming pool.
Do not use outdoors.
This appliance must not be located immediately above or
WARNING
indicating that it must not be covered or has a Do not cover
label. Do not cover or obstruct in any way the heat outlet
grille located at the top of the appliance overheating will
result if the appliance is accidentally covered. Do not place
material or garments on the appliance, or obstruct the air
circulation around the appliance, for instance by curtains
In the event of a fault unplug the heater. Unplug the
appliance when not required for long periods.The supply
cord must be placed on the right hand side of the heater
away from the heat outlet underneath the appliance.
Although this appliance complies with safety standards,
we do not recommend its use on deep pile carpets or on
long hair type of rugs.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experinence and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintaince shall not be made by children
IMPORTANT INSTRUCTIONS
5
SAVE THESE INSTRUCTIONS
without supervision.
Children of less than 3 years should be kept away unless
continuously supervised. Children aged from 3 years and
less than 8 years shall only switch on/off the appliance
provided that it has been placed or installed in its intended
normal operating position and they have been given
supervision or instruction concerning use of the appliance
in a safe way and understanding the hazards involved.
Children aged from 3 years and less than 8 years shall
not plug in, regulate and clean the appliance or perform
user maintaince.
The appliance must be positioned so that the plug is
accessible.
If the supply cord is damaged it must be replaced by the
in order to avoid a hazard.
CAUTION
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched
on and off by the utility.
CAUTION - Some parts of this product can become very
hot and cause burns. Particular attention has to be given
where children and vulnerable people are present.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER-SERVICABLE PARTS INSIDE
IMPORTANT INSTRUCTIONS
6
Quick Reference Guide
Figure 1
1. The electrical information
can be found on the rating label
located on the top of the unit.
2. If you have any technical
questions or concerns
regarding the operation of your
service contact the relavent
customer service as listed on
your warrenty card.
3. For dimensions of your
16.49 in
419 mm
15.82 in.
402 mm
15.00 in.
381 mm
5.79 in.
147 mm
4.34 in.
110 mm
XLF50 50.31 in [1278 mm]
XLF74 74.31 in [1887 mm]
XLF100 100.31 in [2548 mm]
XLF50 51.41 in [1306 mm]
XLF74 75.41 in [1941 mm]
XLF100 101.41 in [2576 mm]
Model No:
230V 240V
P Nom - kW
P min - kW
P max,c - kW
In Standby mode el SB - W
Technical Information
with electronic room temperature control
7
CAUTION: Ensure installation
direct contact with building vapor
barrier or insulation and meets all
local building code.
!NOTE: A dedicated, properly
fused 13 Amp circuit is required,
rated for the appropriate voltage
(230-240V).
WARNING: Construction
and wiring must comply with
local building codes and other
applicable regulations to reduce
WARNING: To reduce the risk
persons, always use a licensed
electrician.
WARNING: To reduce the risk of
the vicinity of the heater.
1. Select a location that is not
susceptible to moisture and is
away from drapes, furniture and
2.
hardware from the box.
!NOTE: Leave the front glass
safely, in the box until the time you
Fireplace Installation
are ready to install it.
3.
dry and dust free location until
you are ready to install the
Installation
CAUTION: Two people will be
required for various steps of
this procedure.
This design of this unit allows three
partial
recess, or sub-
surface mounted.
CAUTION: Sub-surface
mounting should be limited to ½
in. (12 mm) to ensure adequate
1. Prepare a wall with a framed
opening of 16 in. (40.6 cm)
high,
•
•
•
cm) wide, with a bottom sill
that is a minimum of 4 in.
(10.2 cm) deep. The sill can
be constructed to support the
front of the unit to allow the
power supply wires to easily
back of the unit and a pass thru
8
Fireplace Installation
hole drilled for electrical wire
routing.
!NOTE: It is recommended that
the bottom of the unit be mounted
between 30 in. (76.2 cm) and 40
in. (102 cm) from the ground to
maintain an optimized viewing
WARNING: Do not attempt to
wire your own new circuits. To reduce
to persons, always use a licensed
electrician.
WARNING: Ensure that the
be installed has the power cut off
at the service panel until installation
is complete.
2. The unit is provided with an
installed ¾ in. (2.0 cm) trim.
Depending on the installation,
this trim can be removed by
removing the securing screws
and the 4 trim pieces.
3.
and the handles located on the
back, and insert into opening to
the desired depth.
4. Using a bubble level (supplied)
required.
5. Drive four supplied mounting
screws through the four mounting
holes located on the inside
into wall studs (Figure 2).
Figure 2
Mounting Holes
Flame
Panel
9
Fireplace Installation
To prevent electrical shock this
unit is an electrical appliance
that is NOT watertight and must
be installed as to prevent water
from entering unit. This must be
installed away from showers, tubs,
it may fall into a bathtub or other
water container.
Final Assembly
1. Locate and remove the
12 screws securing the partially
reflective glass bracket to
the unit, along the top of the
opening, and set bracket and
screws aside.
2. Remove the provided suction
cup from the inside cavity of
the unit (only for XLF74 and
XLF100 units).
3. Before installation ensure that
the front glass and the partially
Particles can be removed by
dusting lightly with a clean dry
or other marks, the glass
can be cleaned with a damp
cloth. Ensure that the glass
has completely dried before
installation.
4. Carefully secure the suction
cup to the partially reflective
glass, reflective side out, and
place into the openings on
either side of the unit.
5. Tip the glass into the unit and
using the removed screws
secure the glass into the unit
with the provided bracket
(Figure 3). Remove the suction
cup.
Figure 3
Retaining Bracket
Media Tray
Glass Openings
10
Fireplace Installation
6. Evenly space the large media
in the media tray along the back
of the media tray (for optimum
media effect), then carefully
pour and evenly distribute the
smaller media into the Media
Tray.
7. Carefully place the front glass
into the lip located at the bottom
of the opening of the firebox.
8. Tip the front glass into the
unit and secure using the
provided screws and Allen key.
(Figure 4).
!NOTE: Ensure that the suction
cup and Allen key are kept
for any future maintenance or
service.
Figure 4
Fixed Wiring
is supplied without a plug this is to
comply with the local regulations.
In such instances this appliance
must be installed by a suitabily
disconnection must be incorporated
with the local wiring rules.
11
Operation
Remote Operation
multi-function remote control.
! NOTE: To operate correctly, the
remote control must be pointed
towards the front of the unit.
Controls
The unit can be controlled by
either the manual controls which
are located on the upper right of
5 & 6).
A. Standby
Turns the unit On and Off.
Standby button on the remote
or the unit.
• The unit will turn On with the
same functions that it was set
to when it was turned Off and
the intake temperature will be
indicated on the Display.
! NOTE: When any button is
pressed on the unit the intake
temperature will be displayed on
the Display for 7 seconds.
B. Flame Effects
Turns the Flame Effect On and Off.
button on the remote.
General Operation
WARNING: This electric firebox
must be properly installed before it
is used.
This firebox operates with
Comfort$averTM technology,
fan speed and heater wattage to
safely and precisely match the
requirements of the room based on
the thermostat setting. The heater
operates such that once the room
reaches the set point, the fan and
heater will continuously run at a low
level, to maintain the desired room
temperature. If the temperature
in the room rises significantly, i.e.
sun coming through a window or a
central furnace turns on, the heater
will turn off and periodically turn
back on to circulate the air around
the unit, until the room temperature
drops and requires the heater to be
constantly on again.
! NOTE: The unit is designed so
that the fan will run continuously
while the heater is on.
! NOTE: The element retains
heat after shutdown, there is a built
in cool down period of 2 minute
before the fan shuts off completely,
when the heat function is turned
Off.
12
Figure 5
AF
Display
Figure 6
A
D
BC
E
G
J
F
GHI
Operation
C. Heat ON/OFF
Turns the heater On and Off.
button on the remote.
• Indicated by the icon and the
on the display, then the intake
temperature will be displayed
before turning off.
! NOTE: After the heater is
switched off, there is a 2 minute fan
delay, where the fan will continue
running before turning off.
! NOTE: The unit can be operated
in Heat Only Mode. When the unit
is only running with the heater,
the icon will continuously be
displayed on the Display.
! NOTE: The heater may emit
a slight, harmless odor when
condition caused by initial heating
of internal heater parts and will not
occur again.
D Temperature Down
Decreases the temperature setting.
the corresponding button on the
remote.*
• Indicated by setpoint temperature
on the Display decreasing and
the speed of the fan decreasing
to reduce the amount of heat
E. Temperature Up
Increases the temperature setting.
IJ
13
repeatedly pressing the
corresponding button on the
remote.
• Indicated by the heater running
at full heat, for a user set amount
of time, to quickly heat up a cold
room/space. The Heat Boost
can be set for a maximum of 20
minutes, in 5 minute increments.
Disable Heat
If desired, depending on the
season, the heater on the unit can
be disabled. The function of the
remaining controls will continue to
function as outlined in this manual.
Pressing the and buttons
on the unit at the same time and
holding for 2 seconds will disable
and enable the heater.
! NOTE: When the heater has
been disabled and any of the heat
related functions are used, the
Display will indicate "---".
F. Color Themes
Different presets of lighting color
combinations are available in the
unit.
the corresponding button on the
remote or the unit.
the corresponding button on the
remote.*
• Indicated by the setpoint on
the Display increasing and the
speed of the fan increasing to
increase the amount of heat
the current temperature set point
will be displayed for 2 seconds.
from 5 °C to 37 °C (41 °F to
99 °F).
! NOTE: Holding the and
the buttons down for two
seconds, on the unit, will change
the temperature scale from °C to
°F, or vice versa.
F. Eco Operation
Runs the heater in a reduced
wattage range when activated.
corresponding button on the
remote when the heater is on.
• Indicated by the Display and a
reduced fan speed.
G. Heat Boost
Turns the Heater Boost On and
Off. Runs the unit at the full rated
wattage.
Operation
14
repeatedly, until the desired time
is displayed.
• The Display will display the
Once the timer has begun,
pressing the button will display
the time remaining before the
unit turns Off.
! NOTE: The Sleep Timer can be
cancelled at any time by pressing
the button repeatedly until the
sleep timer displays nothing.
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the whole
unit off and it will not come back on
without being reset. If the button
on the unit is pressed, Er2 will be
displayed on the unit. It can be
reset by turning the unit off at the
main disconnect panel and waiting
5 minutes before turning the unit
back on.
CAUTION: If you need to
continuously reset the heater, turn
the unit off at the main disconnect
panel and call technical support.
• Cycles through the different
preset light settings of the
unit, this includes different
combinations of colors of the
! NOTE: Two of the themes in
the cycle are a prism where the
unit cycles through a variety of
colors. Pressing the stops the
cycling and holds the unit on the
preferred color, indicated by a solid
circle. When the unit is on prism,
and is cycling through the colors,
a rotating circle will be displayed.
G. Brightness
Changes the Brightness of the
lights in the unit.
the corresponding button on the
remote or the unit.
• Indicated by the second digit on
"H" (high), and "L" (low).
H. Sleep Timer
The Sleep Timer can be set to
after a preset time (from 30 minutes
to 8 hours).
timer button on the remote,
Operation
15
Operation
Remote Control Battery
Replacement
1. Slide battery cover open on the
remote control.
2. Correctly install one 3 Volt
(CR2032 [longer life] or
CR2025) Battery in the
battery holder.
3. Close the battery cover.
Battery must be recycled or
disposed of properly. Check with
your Local Authority or Retailer
for recycling advice in your area.
Maintenance
WARNING: Disconnect power
and allow heater to cool before
attempting any maintenance or
cleaning to reduce the risk of
persons.
! NOTE:
should not be operated with an
accumulation of dust or dirt on or in
the unit, as this can cause a build
up of heat and eventual damage.
For this reason the heater must
be inspected regularly, depending
upon conditions and at a minimum
yearly intervals.
Cleaning
cleaned in the factory during
the assembly operation. During
shipment, installation, handling,
may collect dust particles; these
can be removed by dusting lightly
with a clean dry cloth.
glass can be cleaned with a damp
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching, do
not use abrasive cleaners.
16
Fireplace Surface Cleaning
Use only a damp cloth to clean
Do not use abrasive cleaners.
Recycling
For electrical products
sold within the European
Community. At the end
of the electrical products
useful life it should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice in your
country.
After Sales Service
Your product is guaranteed for one
year from the date of purchase.
Within this period, we undertake
to repair or exchange this product
free of charge (excluding lamps &
has been installed and operated in
accordance with these instructions.
Your rights under this guarantee are
additional to your statutory rights,
which in turn are not affected by
this guarantee.
Should you require after sales
service you should contact our
customer services the contact
number is located on your warrenty
card. It would assist us if you can
quote the model number, series,
date of purchase, and nature of the
fault at the time of your call. The
customer services help desk will
also be able to advise you should
you need to purchase any spares.
Please do not return a faulty product
result in loss or damage and delay
in providing you with a satisfactory
service.
Please retain your receipt as proof
of purchase.
Maintenance
17
Inhaltsverzeichnis
Beauftragen Sie stets einen
eine Wartungsagentur,um
diesen Kamin zu reparieren.
! HINWEIS: Prozesse und
Verfahren, die als wichtig erachtet
und deshalb speziell hervorgehoben
werden.
VORSICHT: Prozesse und
Verfahren, die zu einer Beschädigung
der Ausrüstung führen, wenn sie nicht
genau beachtet werden.
WARNUNG: Prozesse und
Verfahren, die ein Brandrisiko
darstellen und beim Benutzer
zu ernsthaften Verletzungen
mit möglicher Todesfolge führen
können, wenn sie nicht genau
beachtet werden.
Willkommen und herzlichen Glückwunsch . . . . . . 18
WICHTIGE ANWEISUNGEN ..................19
Kurzanleitung .............................21
Montage des Kamins . . . . . . . . . . . . . . . . . . . . . . 22
Betrieb ..................................26
Wartung .................................30
DE
18
Willkommen und herzlichen Glückwunsch
Danke und herzlichen Glückwunsch, dass Sie sich für einen Elektrokamin
von Dimplex entschieden haben. Bitte beachten Sie, wo Modell- und
Seriennummer dieses Produkts angegeben werden. Sie müssen diese
Bitte lesen Sie diese Anleitung sorgfältig durch
und bewahren Sie sie sicher auf.
VORSICHT: Lesen Sie alle Anweisungen und Warnhinweise
vor der Montage sorgfältig durch. Bei einer Nichtbeachtung dieser
Anweisungen kann es zu Stromschlägen oder Bränden kommen,
unddie Garantie wird ungültig.
Modell- und
Seriennummernschild
19
Wichtige Sicherheitshinweise
Bei der Benutzung von elektrischen Anwendungen sollten die
grundlegenden Sicherheitsmaßnahmen befolgt werden, um
das Risiko für Feuer, Stromschlag oder die Verletzung von
Ist das Gerät beschädigt, sprechen Sie unverzüglich mit dem
Zulieferer vor der Montage und Inbetriebnahme.
Dieses Gerät nicht in der unmittelbaren Nähe eines Bades,
einer Dusche oder eines Schwimmbeckens benutzen.
Nicht draußen benutzen.
Platzieren Sie dieses Gerät nicht direkt ober- oder unterhalb
einer Steckdose oder eines Anschlusskastens.
WARNUNG
welches anzeigt, dass das Gerät nicht abgedeckt werden darf,
oder mit einem Etikett mit der Aufschrift „Nicht abdecken“.
Das Gitter des Wärmeabzugs oben am Gerät darf nicht
abgedeckt oder blockiert werden. Das Gerät kann ansonsten
überhitzen. Keine Materialien oder Textilien auf das Gerät
beispielsweise durch Vorhänge oder Möbelstücke, da dies
zu einer Überhitzung des Geräts führen und Brandgefahr
verursachen kann.
Ziehen Sie im Fall einer Störung des Geräts den Netzstecker.
Ziehen Sie den Netzstecker auch, wenn das Gerät für einen
längeren Zeitraum nicht genutzt wird. Das Stromkabel ist
auf der rechten Seite des Geräts, weg vom Wärmeabzug
unterhalb des Geräts zu platzieren.
Obwohl dieses Gerät den Sicherheitsstandards entspricht,
benutzen oder auf Teppichen mit langen Fasern.
Dieses Gerät darf von Kindern ab 8 Jahren betrieben werden
sowie von Personen, die verminderte körperliche, sensorische
oder geistige Fähigkeiten haben oder keine Erfahrung oder
Wissen haben, wenn sie die Aufsicht für den sicheren Betrieb
eines Gerätes oder Anweisungen erhalten haben und die
potentiellen Gefahren verstehen. Kinder dürfen nicht mit dem
WICHTIGE ANWEISUNGEN
20
BITTE BEWAHREN SIE DIESE
ANWEISUNGEN SICHER AUF
Gerät spielen. Die Reinigung und Wartung darf nicht von
Kindern ohne Aufsicht erfolgen.
Kinder unter 3 Jahren sollten von dem Gerät ferngehalten
werden, es sei denn, sie sind stets beaufsichtigt. Kinder
ab 3 Jahre und weniger als 8 Jahre dürfen das Gerät nur
an- und ausschalten, wenn es in seiner vorgesehenen
Betriebsposition aufgestellt und montiert wurde und wenn
sie die Aufsicht für den sicheren Betrieb eines Gerätes oder
Anweisungen erhalten haben und die potentiellen Gefahren
verstehen. Kinder ab 3 Jahren und unter 8 Jahren dürfen
das Gerät nicht einstecken, regulieren oder reinigen oder
Wartungsarbeiten vornehmen.
Das Gerät muss so aufgestellt werden, dass der Stecker
zugänglich ist.
Wenn das Stromkabel beschädigt ist, muss es durch den
Person ersetzt werden, um Gefahren zu vermeiden.
VORSICHT
Zurücksetzung des Thermoauslösers zu vermeiden, darf
das Gerät nicht an ein externes Schaltgerät angeschlossen
werden, wie etwa ein Zeitschaltgerät oder an einen
Stromkreis, der regelmäßig von der Stromversorgung an- und
ausgeschaltet wird.
VORSICHT - Einige Teile dieses Produkts können sehr
heiß werden und Verbrennungen verursachen. Besondere
Vorsicht ist bei der Anwesenheit von Kindern und verletzlichen
Personen erforderlich.
VORSICHT
STROMSCHLAGGEFAHR
NICHT ÖFFNEN
ES BEFINDEN SICH KEINE TEILE IM GERÄT, DIE VOM
BENUTZER GEWARTET WERDEN KÖNNEN
WICHTIGE ANWEISUNGEN
This manual suits for next models
5
Table of contents
Languages:
Other Dimplex Indoor Fireplace manuals
Dimplex
Dimplex FIGARO FGA15E User manual
Dimplex
Dimplex DF2600L User manual
Dimplex
Dimplex BLF74 User manual
Dimplex
Dimplex PF2325CG User manual
Dimplex
Dimplex DF2608-EU User manual
Dimplex
Dimplex Burgate BRG20 User manual
Dimplex
Dimplex DFI2309 User manual
Dimplex
Dimplex PRISM BLF3451-AU User manual
Dimplex
Dimplex 500002573 User manual
Dimplex
Dimplex Prism BLF5051 User manual
Dimplex
Dimplex DWOP20R User manual
Dimplex
Dimplex SS5800PB User manual
Dimplex
Dimplex BINGHAM BHM 10 User manual
Dimplex
Dimplex Ignite 60 User manual
Dimplex
Dimplex Dakota DKT20 User manual
Dimplex
Dimplex contempra ef KDS6401E Quick start guide
Dimplex
Dimplex milano-ef User manual
Dimplex
Dimplex CAS500 User manual
Dimplex
Dimplex DCF7850 User manual
Dimplex
Dimplex DWOP20R User manual
Popular Indoor Fireplace manuals by other brands
Vermont Castings
Vermont Castings WEF33 Homeowner's installation and operating instructions
Bellfires
Bellfires horizon bell xl 3 cf Instructions for use
Valor
Valor Retrofire RF24XBN Installation and owner's manual
Halcyon
Halcyon H50-01-NG Installation, operation and owner's manual
MHSC
MHSC BFC36 Installation and operating manual
Montigo
Montigo DelRay Tuscany 34DVI Information sheet
Bayside
Bayside FP30-2B operating instructions
Planika
Planika Dancing Flames quick start guide
Regency
Regency E18-NG Owners & installation manual
Amantii
Amantii BI-40-DEEP Installation and operation instructions
THERMOROSSI
THERMOROSSI PAIR11 Installation, use and maintenance guide
Enviro
Enviro C34 instruction manual
Desa
Desa Vanguard VVSA18R Owner's operating & installation manual
KFD
KFD 5161 L Installation and operation manual
Vermont Castings
Vermont Castings EWF36A Homeowner's installation and operating manual
Costway
Costway EP24832US user manual
ROYAL OAK
ROYAL OAK C1809A Assembly instructions
Vermont Castings
Vermont Castings Chateau DVT44 Installation instructions and homeowner's manual