DiO PROBO Z User manual

3D Printer
DIO PROBO Z
User Guide
This is industrial (Class A) electromagnetic compatible
equipment for use outside at home.
Z

3D Printer
DIO PROBO Z
User Guide
Z

CONTENTS
Example of usage
Workflow
DIO PROBO Slicer software
10
11
12
General
Components
Equipment specifications
16
17
Introduction
DIO PROBO Z maintenance
Vat and Resin maintenance
Warranty
36
37
39
Maintenance
How to use DIO PROBO Z
26
How to use
DIO PROBO Z installation
User precautions
20
21
InstallationGreetings
3D Printer DIO PROBO Z
User Guide

7
3D Printer DIO PROBO Z User Guide
Greetings
Thank you for purchasing 3D Printer DIO PROBO Z.
We provide a total digital solution for a wide range of digital care
services. You can print high-quality prosthetic outputs using
DIO PROBO Z in order to increase productivity and work efficiency.
This manual guides you to use the printer.
Caution : Carefully read this manual before operating
3D Printer DIO PROBO Z.

1.
General
Example of usage
Workflow
DIO PROBO Slicer software
3D Printer DIO PROBO Z User Guide

1110
3D Printer DIO PROBO Z User Guide
General
Workflow
The workflow of PROBO Z is designed to enhance the
prosthetic outputs quality as well as production efficiency.
The intuitive and user-friendly process allows the user to
perform tasks easily.
Model / Oral scanning
Scan the model /
oral cavity using the
scanner.
CAD design
Design the prosthetic
outputs using CAD software.
Slicing
Slicing prosthetic outputs to
give printing instructions
in the 3D printer.
Curing and finishing work
Using a curing machine, the output is
finally cured and prosthetic finishing is
carried out.
Printing with 3D Printer
Input the slicing data
in the 3D Printer DIO
PROBO Z to print the
prosthetic outputs.
Example of usage
DIO PROBO Z is used for a wide range of dental production
Dental model
Ortho model
Temporary crown
Surgical guide
Casting
Denture base

1312
3D Printer DIO PROBO Z User Guide
General
DIO PROBO Slicer software
The slicing software DIO PROBO Slicer optimizes the work
of 3D printer PROBO Z so that production efficiency
is maximized through automated functions that can perform
optimal allocation, orientation, and support generation.

15
3D Printer DIO PROBO Z User Guide
2.
Introduction
Components
Equipment specifications
3D Printer DIO PROBO Z User Guide

1716
3D Printer DIO PROBO Z User Guide
General
Components
※ If you want to use a wireless network, you need to purchase
an additional USB wireless LAN card. Please contact DIO Corporation
before purchasing.
Basic components
Equipment specifications
Introduction
Dimension 300 x 378 x 484 mm
Build size 105.6 x 59.4 x 80 mm
Light modulator DLP (FHD: 1920 x 1080 Pixels)
Light source 405 nm LED
Resolution (Axis) XY 55
µm / Z 100, 50, 25 µm
Operating ambient temp 20 ~ 32ºC
Weight 21 kg
Power consumption 120W
Rating DC 24V
Adaptor
Input : AC 100-240V, 50/60Hz
Output : DC 24V
③ Vat
⑦ Power cable
⑤ Brush④ Scrapper
⑧ L-shaped hex wrench
① DIO PROBO Z ② Build Plate
⑥ Power adapter
Caution : Please check your package components and if you have
a missing component, contact your distributor.

19
3D Printer DIO PROBO Z User Guide
3.
Installation
DIO PROBO Z installation
User precautions
3D Printer DIO PROBO Z User Guide

2120
3D Printer DIO PROBO Z User Guide
DIO PROBO Z installation User precautions
General caution
The equipment must be handled by experienced personnel only.
Installation caution
Pre-operation checklist
Prevent shock or vibration during operation.
Do not turn off the power of the printer during operation.
In case of smoke or strange odor from the equipment or cables, immediately
turn off the power switch and unplug the power cable, and then contact the
distributor.
Remove the power cable from the power outlet if the equipment is not to be
used for a long time.
If there is any problem, do not disassemble the equipment. Please contact
the distributor.
Do not modify the equipment.
USB 1 port
USB 2 port
LAN port(For administrator)
Main power switch
Power port
① Connect the power cable.
② Turn on the power switch at the back of the 3D printer.Turn on the power switch at the back of the 3D printer.
Installation
Install the equipment at a location without adverse effects on the air in
terms of pressure, temperature, humidity, ventilation, dust, salinity, and ions.
Beware of safety such as inclination, vibration, and shocks.
Do not install the equipment at a chemical storage area and a gas
generation point.
Beware of power frequency, current, or allowable current(or power
consumption).
Level the vat and the installation location.
Product connection guide

2322
3D Printer DIO PROBO Z User Guide
Operation precautions
Install the printer at a well-ventilated location because resin may
generate a peculiar smell during printing.
Do not use volatile substances near the printer as it may cause fires
or explosions.
Turn off the printer then remove the power cable connection and
resin vat from the printer, during moving it, so that resin doesn’t
overflow or spill from the vat.
Do not turn off the main power of the printer before press the
Shutdown button on the top left of the touchscreen. Turn off the
main power switch while the printer is in operation may shorten the
life of the engine and cause mechanical failure.
Prevent foreign substances into the printer, such as water, other
liquids, metal pieces, or other conductive substances, may have
harmful effects on the printer such as mechanical failures. Also, do
not operate the printer with wet hands as there is risk of electric
shock; please wear nitrile gloves.
Scratching of the printer power cable for the rough floor may cause
sparks or voltage failures, so please take caution.
Do not arbitrarily disassemble or modify the printer. The warranty
benefits will void and we will not be responsible for any problems
that arise with the products.
When the temperature is below 20°C, the 3D printer will display a
low temperature warning message and the output of the 3D printer
may not be good. The warning message will be automatically cleared
when the temperature rises above 20°C.
During output operation of 3D Printer, the output operation may be
automatically cancelled to protect the product and prevent output
failure, such as detection of shock or motor malfunction signals.
Installation

25
3D Printer DIO PROBO Z User Guide
4.
How to use
How to use DIO PROBO Z
3D Printer DIO PROBO Z User Guide

2726
3D Printer DIO PROBO Z User Guide
How to use DIO PROBO Z
① System on ② Select output file
I Touch twice the touch screen at a time.
I Wait for the loading screen then slice file selection
screen to appear I Select a slice file from the file list and press the next button
at the bottom
Loading screen
Slice file selection screen
How to use

2928
3D Printer DIO PROBO Z User Guide
③ Pouring resin ④ Lock the build plate
I Pour appropriate material into the vat for the printing.
I Press the next button to continue.
I Insert the build Plate into the groove of fastening plate
I Push the build Plate all the way in and turn the silver knob
clockwise to ensure that it is fixed firmly.
I Press the next button on the touch screen and proceed
to the next step
Build plate confirmation screen
How to use

3130
3D Printer DIO PROBO Z User Guide
Printing completion screen
⑤ Confirm output file ⑥ Removing the build plate
I When the printing finish, press the next button on the touch screen.
I Rotate the silver knob counterclockwise to release the fixed
build plate.
I Perform post processing of the output.
I Check the name of the file to print and press next button.
I The printing commences and you can see the progress.
I When press cancel button, output operation is cancelled.
I When press pause button, output operation pause.
How to use

3332
3D Printer DIO PROBO Z User Guide
⑦ System off
I Press the shut down button on the top left of the screen.
How to use

35
3D Printer DIO PROBO Z User Guide
5.
Maintenance
DIO PROBO Z maintenance
Vat and Resin maintenance
Warranty
3D Printer DIO PROBO Z User Guide

3736
3D Printer DIO PROBO Z User Guide
DIO PROBO Z maintenance
If the printer is not be used for an
extended period, unplug the power
cable of the printer and store the
printer in a shade area to keep it
stored for a long time without failure.
In case resin has fallen or spilt inside
the printer, use alcohol to an industrial
wiper and clean it.
Vat and Resin maintenance
Vat maintenance
Remove the used resin completely from the vat with an
industrial wiper.
If you clean the resin with tissues Instead of an industrial wiper,
dust could be stick with the vat film, thus influencing the output.
And if a different type of resin or water is mixed into it, it may
have a negative influence on the print output quality.
Sheet surface
Resin residue
In case there is residue on the vat
- Use silicone spatula to remove debris.
- When removing debris, be careful not to damage the film
Maintenance
For a longer service life, the proper maintenance is key.
Here is guideline for 3D printer and consumables maintenance.

3938
3D Printer DIO PROBO Z User Guide
Resin maintenance Warranty
Resin waste handling guide
Resin is vulnerable to sunlight or
various other lights. Always keep in
a shade area without light for longer
service life.
This free warranty is valid for one year from the date of original pur-
chase and does not cover any damage caused by misuse, accident,
unauthorized repairs or modifications.
For more information, please contact DIO Corporation.
Never mix with other types of resin.
Contact to a specialized waste handler.
Store the remaining resin in a resin
container.
Resin waste
Maintenance