Diphano METRIS User manual

1/2
INSTRUCTION PAPER
METRIS | Barstool - Seat cushion
1x seat cushion 2x velco
STEP 1: PLACE VELCRO
STEP 2: CLOSE VELCRO
HOOK SURFACE
SIDE UP
12 3
Move the velcro so it is placed between the platic cap and the side of the chair. Now close the velcro by following the 3 steps in the image
above. Repeat this action for the other side.
CONTENT
A B
Start by unpacking everything carefully. Make sure to cover the floor to prevent any damage or scratching.
Place the velcro on the one but last slat of the chair. Make sure the hook surface side is face upwards. Repeat this action for the other side.

INSTRUCTION PAPER
METRIS | Barstool - Seat cushion
2/2
PIDE210120 Diphano cannot be held responsible if the assembly instructions are not followed properly.
www.diphano.com
LOUNGER
SIDE TABLE
BENCHES & LOW TABLES
DINING TABLES 92 | 75h BAR & BAR TEAKPARTY TABLES 109 | 92hBISTRO TABLES 108 | 74h
DINING
ARMCHAIR BARSTOOLS
78 | 62h
STEP 3: PLACE SEAT CUSHION RESULT
LOOP SURFACE
Place the seat cushion on the chair so the loop surface on the
cushion connects perfectly with the hook surface on the chair.