Diphano Cubic User manual

Cubic
INSTRUCTION MANUAL

2
how to connect your modules
CONTENT
1 set contains:
Start by unpacking everything carefully. Make sure to cover the floor to prevent any
damage or scratching (you can use the cardboard box for this).
Diphano cannot be held responsible if the assembly instructions are not followed properly.
1x connector 4x plastic rivet fastener

3
WHERE TO CONNECT
In the image below you can see all possible connection points per module.
2,5-seater
2 sets included
2 sets included 2 sets included 2 sets included
2 sets included
left corner double seat
right corner double seatmedium footrest small middle seat

4
PLACE MODULES
Place modules next to each other.
1

5
PLACE CONNECTOR
Place connectors so the pre-made holes match.
2

6
Fixate by placing the plastic rivet fastners in the pre-made holes.
FIXATE
3

7
how to adjust the feet
Check with a spirit level if the modules are placed level. If not, (un)screw the
adjustable feet until your concept is completely level. This ensures each module
can be leveled so it fits perfectly to the next module.

8
how to connect your cushions
CONTENT
CONNECT CUSHION CONNECTOR
Connect 1 part of the velcro on the cushion connector to the velcro strip
on the bottom of the back cushion.
1x velcro cushion connector

9
CONNECT BACK CUSHION TO SEAT CUSHION
Connect the back cushion to the seat cushion by matching the velcro strips.

10
CONNECT SIDE CUSHION
Connect the side cushion by matching the velcro strip with the second velcro part
of the cushion connector.

11
maintenance & care
POWDERCOATED ALUMINIUM
FABRICS
Simply brush away loose dirt, rinse, and clean with a mild, lukewarm
soapy solution. Rinse thoroughly and pat dry with a cloth.
Simply brush away loose dirt. Spray on a cleaning solution of water and mild
soap. Use a soft bristle brush to clean and allow cleaning solution to soak into the
fabric. Rinse thoroughly until all soap residue is removed and allow to air-dry.
30°

PIDE220204
www.diphano.com
Textielstraat 4 - 8790 Waregem - Belgium
Tel. [phone] - [email protected]