Diphano METRIS User manual

1/2
INSTRUCTION PAPER
METRIS | Dining table 226x90
8x bolt (M8x40mm)
4x bolt (M6x15mm) 4x spring washer (M6)
8x spring washer (M8)
4x washer (M6)
8x washer (M8)
1x hex key (5)
1x hex key (6)
STEP 1: CONNECT ALUMINIUM LEGS
FC
HE G
D
AB
Use the hex keys (D,H) to assemble the aluminium legs (J) onto the table top (I) as shown in the picture. Make sure you follow the correct order
as indicated by the letters in the picture. Repeat this action for the other side.
CONTENT
A
E
B
F
C
G
D
H
2x alu legs1x alu table top
I J
Start by unpacking everything carefully. Make sure to cover the floor to prevent any damage or scratching (you can use the cardboard box for this).

INSTRUCTION PAPER
METRIS | Dining table 226x90
2/2
PIDE210120 Diphano cannot be held responsible if the assembly instructions are not followed properly.
www.diphano.com
LOUNGER
SIDE TABLE
BENCHES & LOW TABLES
DINING TABLES 92 | 75h BAR & BAR TEAKPARTY TABLES 109 | 92hBISTRO TABLES 108 | 74h
DINING
ARMCHAIR BARSTOOLS 78 | 62h
STEP 2: TURN TABLE STEP 3: ADJUST FEET
Turn the table carefully to its normal position with at least 4 persons. Check with a spirit level if the table is placed level. If not,
(un)screw the adjustable feet till your table is completely
level.