Diphano Icon User manual

Icon
cushion set
dining armchair
INSTRUCTION MANUAL

2
CONTENT
how to install the cushion set
1x seat cushion
bottom viewtop view
A
1x PE locker
C
1x back cushion
B
Start by unpacking everything carefully. Make sure to cover the floor to prevent any
damage or scratching

3
PLACE BACK CUSHION
Slide the fabric tunnel of the back cushion (B) in the open space of the back part of
the chair.
1

4
FIXATE BACK CUSHION
Fixate the back cushion by placing the PE locker (C) into the fabric tunnel.
2

5
PLACE SEAT CUSHION
Slide the velcro parts of the seat cushion (A) in the open space of the seat part of
the chair.
3

6
FIXATE SEAT CUSHION
Fixate the seat cushion by pressing together the loop and the hook parts of the
velcro.
4
12
12

7
maintenance & care
FABRICS
Simply brush away loose dirt. Spray on a cleaning solution of water and mild
soap. Use a soft bristle brush to clean and allow cleaning solution to soak into the
fabric. Rinse thoroughly until all soap residue is removed and allow to air-dry.
30°

PIDE220530
www.diphano.com
Textielstraat 4 - 8790 Waregem - Belgium
Tel. [phone] - [email protected]