Discount Car Stereo IL-KNW User manual

Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
IL-KNW
APPLE LIGHTNING ADAPTER INSTALLATION GUIDE FOR KENWOOD AUX READY RADIOS
Revised: September 8, 2021

Introduction
Just because you own an older radio does not mean you have to settle for old
technology. Back in late 2012, Apple released a new generation of products and
with them a new Lightning plug, and if you have an older iPod adapter it will also
need updating. The iL-KNW adapter updates all Kenwood Aux Ready Radios to play
and charge the newest Apple products including the iPhone x, iPod Touch (5G),
iPod Nano(7G), iPad(4G), iPad Mini(1G), iPad Mini Retina Display etc. Installing this
adapter requires sacrificing the Kenwood CD Changer or any other Kenwood
accessory, but with the storage capacity of these new devices sacrificing the CD
Changer should be an easy decision.
Installation
1. Remove radio from dashboard to gain access to the connector.
2. To remove please follow the specific radio instruction manual (some
require special removal keys not included).
3. With radio removed disconnect any accessory connected to 13-pin port (See
Fig. 1)
Warning: Any accessory disconnected from 13-pin port will no longer function.
Kenwood KCA-S220A switcher required for Kenwood radios to support two
simultaneous connections.
Fig. 1
Radio connector/adapter plug
4. Connect 13-pin plug from adapter to Kenwood radio (See. Fig.1)
5. Run Lightning cable (See Fig. 2) to desired mounting location on
dashboard, glove box, console etc. within 5 ft. of radio. Use caution to
not cut, pinch or crimp the cable during this step.
6. Securely install the cable in a location away from heat, humidity,
moving parts, or sharp metal objects. Damage to lightning plug may
occur if subject to abuse.
Fig. 2
Apple Lightning plug

Operation
1. Connect Apple iPod, iPad or iPhone device to Lightning plug
2. Apple device will begin charging
3. Select “AUX” input source on Kenwood radio (See Fig. 3)
Fig.3
Kenwood source menu
4. Select your favorite track using the devices built-in controls.
Warning: Playlist and Track selection is *NOT* possible from the
radio. You must use the Apple device built-in controls to access
music files
5. Apple device should now be heard on the car speakers
6. Use Volume control on the Kenwood radio to set adjust playback level
7. If successful go ahead and Reinstall the Radio
Frequent ask questions & troubleshooting
1. Which Kenwood radios are compatible with the IL-KNW?
Ever since 1999 Kenwood began adding auxiliary functionality to some but
not all radios. They are a few things you can check to verify compatibility:
a. First, verify radio has a 13-pin connector
b. Check that “AUX INPUT” is listed in “Switching mode” or “Selecting the
source” section of radio manual (See Fig. 3)
c. Check if radio is compatibility with Kenwood KCA-S210A or CA-C1Ax
accessories
2. My Kenwood radio has a 13-pin connector, does this mean it is
compatible with the IL-KNW?
NO! The 13-pin connector does not mean the IL-KNW is compatible. In
addition to 13-pin port, radio must meet requirements in question #1.
3. Does the IL-KNW display text on Kenwood radios?
NO! The IL-KNW will not display text on radio screen.
4. Will I be able to control Apple device from Kenwood radio?
NO! it is not possible to control Apple device from radio buttons. Use apple
device built-in control to access music files and display
Disclaimer
• This product has no affiliation with Kenwood or Apple
• We’re not liable for misuse of this product.
•We recommend professional installation.
© 1995-September 21 Discount Car Stereo. All rights reserved. Information in this document is subject to
change without notice. Other products and companies referred to herein are trademarks or registered
trademarks of their respective companies or mark holders.