Disney FROZEN KID'S DOUBLE MIC KARAOKE SPEAKER User manual

1
KID’S DOUBLE MIC KARAOKE SPEAKER
INSTRUCTION MANUAL
Please read these instructions carefully and retain for future reference
DY-0202-FRA

2
•Bluetooth, USB & Aux Inputs
•2 x Microphones
•Recording Function
•Voice Changer Effects
•LED Lights
•Built-in Sound Effects
•Frozen 0202 Karaoke Speaker Unit
•USB Charging Cable
•Carry Strap
•Aux Cable
•2 x Wired Microphones
•Instruction Manual
•Bluetooth®:
oVersion : 5.0
oChipset : AC 6926A
oProfiles : SSP
oRange : 10 m / 33 ft
•Microphone:
oType : Condenser
oSize : 3.5 mm
•Speaker:
oImpedance : 2 Ω
oSensitivity : 86 dB
oDriver Size : 101.5 mm
oSignal to Noise Ratio : 65 dB
HIGHLIGHTS
PACKAGE CONTENTS
SPECIFICATIONS

3
oBattery Capacity : 3.7 V, 2 400 mAh
oCharge Time : 6 Hours
oCharge Input : 5 V DC, 1 A
oMax Size for USB Input : 32 GB
oFrequency Response : 90 Hz –20 kHz
oPlaytime : 2 –4 Hours
oTotal RMS Power Output : 6 W RMS
oWeight : 1.3 kg
oSize : 330 (W) x 180 (H) x 340 (L) mm

4
IDENTIFYING PARTS
1. Master Volume
2. Mode / ECHO
3. Record
4. Repeat
5. Previous Track
6. Play / Pause
7. Next Track
8. Power ON / OFF
9. Micro-USB Charging Port
10. LED Charge Indicator
11. USB Input
12. Aux-Out Port
13. Aux-In Port
14. 3.5 mm Mic-In 2 Port
15. 3.5 mm Mic-In 1 Port

5
INSTRUCTIONS FOR USE
•Please ensure that the battery is fully charged before using the Frozen 0202 Karaoke
Speaker for the first time.
•Recommended charge time before first use only is at least 12 hours; thereafter the unit
requires 8 hours to be charged.
•When the battery level is low, the LED Light Indicator will start to flash and the unit will
go into a self-protection mode, thus dropping the volume to 50%.
•Connect the provided USB charge cable to the charging slot on the Frozen 0202
Karaoke Speaker Unit. Connect the other end of the USB charger to a 5 V USB wall
charger or available USB port on your computer.
Note:
•Please do not charge the Frozen 0202 Karaoke Speaker Unit for more than 8 hours.
Switching on / off the Karaoke speaker: To switch on / off the speaker, slide the Power /
Light Switch to the ON / OFF position.
Your Frozen Bluetooth Speaker Unit must be paired to a Bluetooth®device before they can
be used in Bluetooth®Mode.
1. Switch the power on, the Frozen Bluetooth Speaker Unit enter a Bluetooth mode
automatically.
2. Activate the Bluetooth® on your playback device and search for “Frozen”. Select “Frozen”
from the device’s list to connect. You will hear a connection tone after the Frozen
Bluetooth Speaker Unit has been paired successfully.
3. Should you be asked for a password, please enter the Bluetooth Default Password of
0000.
4. The ring light will continue to flash after the Frozen Bluetooth Speaker Unit has paired
successfully.
5. You can now playback audio through the Bluetooth Speaker.
6. Music tracks can be selected either on the Bluetooth Speaker or on your playback
device (smartphone, computer, tablet, etc).
Note:
•It is only necessary to pair your Frozen Bluetooth Speaker Unit once with each device.
CHARGING THE SPEAKER UNIT
SWITCHING THE SPEAKER ON & OFF
PAIRING WITH OTHER BLUETOOTH®DEVICES