Ditch Witch FM13V User manual

FM13V - SERVICE 1
SERIAL NUMBER
FM13V - SERVICE 1
SERIAL NUMBER
SERVICE
SERIAL NUMBER
Record the serial numbers and date of purchase of your
equipment in the spaces below.
Date of manufacture:
Date of purchase:
Fluid mixing unit serial
number:
SERVICE
SERIAL NUMBER
Record the serial numbers and date of purchase of your
equipment in the spaces below.
Date of manufacture:
Date of purchase:
Fluid mixing unit serial
number:

2FM13V - SERVICE
SUPPORT PROCEDURE 2FM13V - SERVICE
SUPPORT PROCEDURE
SUPPORT PROCEDURE
Notify your dealer immediately of any malfunction or failure of
Ditch Witch equipment.
Always give model, serial number, and approximate date of your
equipment purchase. This information should be recorded and
placed on file by the owner at the time of purchase.
Return damaged parts to dealer for inspection and Warranty
consideration if in warranty time frame.
Order genuine Ditch Witch replacement or repair parts from your
authorized Ditch Witch dealer. Use of another manufacturer's
parts may void warranty consideration.
RESOURCES
Publications
Contact your Ditch Witch dealer for publications and videos
covering safety, operation, service, and repair of your equipment.
Ditch Witch Training
For information about on-site, individualized training, contact your
Ditch Witch dealer.
SUPPORT PROCEDURE
Notify your dealer immediately of any malfunction or failure of
Ditch Witch equipment.
Always give model, serial number, and approximate date of your
equipment purchase. This information should be recorded and
placed on file by the owner at the time of purchase.
Return damaged parts to dealer for inspection and Warranty
consideration if in warranty time frame.
Order genuine Ditch Witch replacement or repair parts from your
authorized Ditch Witch dealer. Use of another manufacturer's
parts may void warranty consideration.
RESOURCES
Publications
Contact your Ditch Witch dealer for publications and videos
covering safety, operation, service, and repair of your equipment.
Ditch Witch Training
For information about on-site, individualized training, contact your
Ditch Witch dealer.

FM13V - FOREWORD 3
FM13V - FOREWORD 3
FOREWORD
This manual is an important part of your equipment. It provides
safety information and operation instructions to help you use and
maintain your Ditch Witch equipment.
Read this manual before using your equipment. Keep it with the
equipment at all times for future reference. If you sell your
equipment, be sure to give this manual to the new owner.
If you need a replacement copy, contact your Ditch Witch dealer.
If you need assistance in locating a dealer, visit our website at
www.ditchwitch.com or write to the following address:
The Charles Machine Works, Inc.
Attn: Marketing Department
PO Box 66
Perry, OK 73077-0066
USA
The descriptions and specifications in this manual are subject to
change. The Charles Machine Works, Inc. reserves the right to
improve equipment. Some product improvements may have
taken place after this manual was published. For the latest
information on Ditch Witch equipment, see your Ditch Witch
dealer.
Thank you for buying and using Ditch Witch equipment.
FOREWORD
This manual is an important part of your equipment. It provides
safety information and operation instructions to help you use and
maintain your Ditch Witch equipment.
Read this manual before using your equipment. Keep it with the
equipment at all times for future reference. If you sell your
equipment, be sure to give this manual to the new owner.
If you need a replacement copy, contact your Ditch Witch dealer.
If you need assistance in locating a dealer, visit our website at
www.ditchwitch.com or write to the following address:
The Charles Machine Works, Inc.
Attn: Marketing Department
PO Box 66
Perry, OK 73077-0066
USA
The descriptions and specifications in this manual are subject to
change. The Charles Machine Works, Inc. reserves the right to
improve equipment. Some product improvements may have
taken place after this manual was published. For the latest
information on Ditch Witch equipment, see your Ditch Witch
dealer.
Thank you for buying and using Ditch Witch equipment.

4FM13V - FOREWORD 4FM13V - FOREWORD
Operator's Manual
FM13V
Issue No. 2.0/OP-7/2014
Part Number 053-1125
Copyright 2007, 2014
by The Charles Machine Works, Inc.,
Perry, Oklahoma
, Ditch Witch, CMW, Jet Trac, Roto
Witch, Subsite, , and The Underground Authority Worldwide are
registered trademarks of The Charles Machine Works, Inc.
Operator's Manual
FM13V
Issue No. 2.0/OP-7/2014
Part Number 053-1125
Copyright 2007, 2014
by The Charles Machine Works, Inc.,
Perry, Oklahoma
, Ditch Witch, CMW, Jet Trac, Roto
Witch, Subsite, , and The Underground Authority Worldwide are
registered trademarks of The Charles Machine Works, Inc.

FM13V - CONTENTS 5
FM13V - CONTENTS 5
CONTENTS
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Support Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Switches and Gauges . . . . . . . . . . . . . . . . . . . . . . . . .9
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Safety Alert Classifications . . . . . . . . . . . . . . . . . . . . .19
Safety Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
LIFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Check Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Select Drilling Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . .26
CONTENTS
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Support Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Switches and Gauges . . . . . . . . . . . . . . . . . . . . . . . . . 9
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Safety Alert Classifications . . . . . . . . . . . . . . . . . . . . 19
Safety Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LIFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Check Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Select Drilling Fluid. . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6FM13V - CONTENTS 6FM13V - CONTENTS
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Mix Drilling Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Pump Fluid to Drilling Unit . . . . . . . . . . . . . . . . . . . . . 33
Drain System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
LUBRICATION AND MAINTENANCE . . . . . . . . . . . . . . . 37
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Engine Oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
FM13V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Drilling Fluid Tanks. . . . . . . . . . . . . . . . . . . . . . . . . . . 45
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Mix Drilling Fluid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Pump Fluid to Drilling Unit . . . . . . . . . . . . . . . . . . . . . 33
Drain System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
LUBRICATION AND MAINTENANCE . . . . . . . . . . . . . . . 37
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Engine Oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
FM13V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Drilling Fluid Tanks. . . . . . . . . . . . . . . . . . . . . . . . . . . 45

FM13V - OVERVIEW 7
FM13V - OVERVIEW 7
OVERVIEW
The FM13V is a platform mounted venturi mixing system which
mixes drilling fluid quickly and efficiently. It transfers drilling fluid
for use with directional drilling systems. The FM13V has two
available drilling fluid mixing tank sizes: 500 gal (1892 L) and
1000 gal (3785 L).
1. metering plate 5. base
2. bag ripper 6. suction wand
3. pump 7. dry chemical hopper
4. engine 8. platform
OVERVIEW
The FM13V is a platform mounted venturi mixing system which
mixes drilling fluid quickly and efficiently. It transfers drilling fluid
for use with directional drilling systems. The FM13V has two
available drilling fluid mixing tank sizes: 500 gal (1892 L) and
1000 gal (3785 L).
1. metering plate 5. base
2. bag ripper 6. suction wand
3. pump 7. dry chemical hopper
4. engine 8. platform

8FM13V - OVERVIEW 8FM13V - OVERVIEW

FM13V - CONTROLS 9
SWITCHES AND GAUGES
FM13V - CONTROLS 9
SWITCHES AND GAUGES
CONTROLS
SWITCHES AND GAUGES
OVERVIEW
1. ignition switch (electric start
only) 6. choke
2. auxiliary outlet (12VDC,
electric start only) 7. secondary fuel shut-off valve
3. hourmeter 8. engine stop switch
4. throttle 9. battery disconnect (electric
start only)
5. rope start 10. primary fuel shut-off valve
(rope start only)
CONTROLS
SWITCHES AND GAUGES
OVERVIEW
1. ignition switch (electric start
only) 6. choke
2. auxiliary outlet (12VDC,
electric start only) 7. secondary fuel shut-off valve
3. hourmeter 8. engine stop switch
4. throttle 9. battery disconnect (electric
start only)
5. rope start 10. primary fuel shut-off valve
(rope start only)

10 FM13V - CONTROLS
SWITCHES AND GAUGES 10 FM13V - CONTROLS
SWITCHES AND GAUGES
DESCRIPTIONS
Ignition Switch (Electric Start Only)
This switch has three positions.
• Insert key and turn clockwise to the “ON” position.
• Turn switch all the way clockwise to the “Start” position.
• Release when engine starts. Key will return to on position.
• Turn counterclockwise to STOP to stop engine.
IMPORTANT Turn ignition switch to the STOP position any time
the engine stops running.
Auxiliary Outlet (Electric Start Only)
This outlet provides auxiliary power to electrical accessories. To
operate work lights or other 12V devices, plug into outlet.
Notice Engine alternator is capable of delivering 3 Amps at 3600
RPM. Running engine at part throttle while using electrical
accessories, or using accessories that use more than 3 amps for
an extended time may discharge battery.
Tachometer/Hourmeter
This gauge records engine
operating time. Use these times
to schedule lubrication and
maintenance.
When engine is operating,
engine rpm is displayed.
When engine is not operating,
engine operating time is
displayed.
DESCRIPTIONS
Ignition Switch (Electric Start Only)
This switch has three positions.
• Insert key and turn clockwise to the “ON” position.
• Turn switch all the way clockwise to the “Start” position.
• Release when engine starts. Key will return to on position.
• Turn counterclockwise to STOP to stop engine.
IMPORTANT Turn ignition switch to the STOP position any time
the engine stops running.
Auxiliary Outlet (Electric Start Only)
This outlet provides auxiliary power to electrical accessories. To
operate work lights or other 12V devices, plug into outlet.
Notice Engine alternator is capable of delivering 3 Amps at 3600
RPM. Running engine at part throttle while using electrical
accessories, or using accessories that use more than 3 amps for
an extended time may discharge battery.
Tachometer/Hourmeter
This gauge records engine
operating time. Use these times
to schedule lubrication and
maintenance.
When engine is operating,
engine rpm is displayed.
When engine is not operating,
engine operating time is
displayed.

FM13V - CONTROLS 11
SWITCHES AND GAUGES
FM13V - CONTROLS 11
SWITCHES AND GAUGES
Throttle
This lever adjusts engine speed during mixing process.
• Move lever to the right to decrease engine speed.
• Move lever to the left to increase engine speed.
Rope Start
On rope start units, this is the primary method for starting engine.
The rope is a backup method to start engine if electric start fails.
Pull rope to start engine.
Choke
This valve regulates air/fuel mixture. To help start cold engine,
close valve.
Secondary Manual Fuel Shut-off Valve
This valve stops the flow of fuel from the fuel tank to the engine
when unit is transported or stored. This valve is present on both
electric start and rope start units.
• To open valve, turn lever to the right.
• To close valve, turn lever to the left.
Throttle
This lever adjusts engine speed during mixing process.
• Move lever to the right to decrease engine speed.
• Move lever to the left to increase engine speed.
Rope Start
On rope start units, this is the primary method for starting engine.
The rope is a backup method to start engine if electric start fails.
Pull rope to start engine.
Choke
This valve regulates air/fuel mixture. To help start cold engine,
close valve.
Secondary Manual Fuel Shut-off Valve
This valve stops the flow of fuel from the fuel tank to the engine
when unit is transported or stored. This valve is present on both
electric start and rope start units.
• To open valve, turn lever to the right.
• To close valve, turn lever to the left.

12 FM13V - CONTROLS
SWITCHES AND GAUGES 12 FM13V - CONTROLS
SWITCHES AND GAUGES
Engine Stop Switch
This switch controls power to the ignition system for electric
start units. This switch turns power on and off for rope start
units.
• To turn power on, turn clockwise.
• To turn power off, turn counterclockwise.
Note The ignition switch is the preferred method of stopping
engine for electric start units. For normal operation, leave this
switch on all the time and use ignition switch to stop and start
unit. Turn key to the off position when engine is not running.
Battery Disconnect (Electric Start Only)
This switch connects/disconnects power from battery during
service and long-term storage.
• To connect, move switch so that indicator points left.
• To disconnect, move switch so that indicator points right.
Primary Fuel Shut-off Valve
For rope start units, use this valve to stop the flow of fuel from
the fuel tank to the engine when unit is transported or stored.
• To open valve, turn valve until tab is aligned with hose.
• To close valve, turn valve until tab is not aligned with hose.
For electric start units, the primary fuel shutoff is electrically-
actuated. The valve is closed when the ignition switch is off and
open when the ignition switch is on.
Engine Stop Switch
This switch controls power to the ignition system for electric
start units. This switch turns power on and off for rope start
units.
• To turn power on, turn clockwise.
• To turn power off, turn counterclockwise.
Note The ignition switch is the preferred method of stopping
engine for electric start units. For normal operation, leave this
switch on all the time and use ignition switch to stop and start
unit. Turn key to the off position when engine is not running.
Battery Disconnect (Electric Start Only)
This switch connects/disconnects power from battery during
service and long-term storage.
• To connect, move switch so that indicator points left.
• To disconnect, move switch so that indicator points right.
Primary Fuel Shut-off Valve
For rope start units, use this valve to stop the flow of fuel from
the fuel tank to the engine when unit is transported or stored.
• To open valve, turn valve until tab is aligned with hose.
• To close valve, turn valve until tab is not aligned with hose.
For electric start units, the primary fuel shutoff is electrically-
actuated. The valve is closed when the ignition switch is off and
open when the ignition switch is on.

FM13V - CONTROLS 13
VALVES
FM13V - CONTROLS 13
VALVES
VALVES
OVERVIEW
1. mixing jet valve 4. dry chemical hopper valve
2. pump drain valve 5. discharge valve
3. liquid chemical valve 6. mixing venturi valve
VALVES
OVERVIEW
1. mixing jet valve 4. dry chemical hopper valve
2. pump drain valve 5. discharge valve
3. liquid chemical valve 6. mixing venturi valve

14 FM13V - CONTROLS
VALVES 14 FM13V - CONTROLS
VALVES
DESCRIPTIONS
Mixing Jet Valve
This valve controls the flow of fluid from pump to the mixing jets in
tank.
• Turn valve handle counterclockwise 1/4 turn to open valve.
• Turn valve handle clockwise 1/4 turn to close valve.
Pump Drain Valve
This valve drains fluid from pump and some fluid lines.
• Turn handle counterclockwise 1/4 turn to open.
• Turn clockwise 1/4 turn to close.
Liquid Chemical Hopper Valve
This valve controls the flow of polymers or wetting agents to the
mixing system.
• Turn handle counterclockwise 1/4 turn to open valve.
• Turn handle clockwise 1/4 turn to close valve.
DESCRIPTIONS
Mixing Jet Valve
This valve controls the flow of fluid from pump to the mixing jets in
tank.
• Turn valve handle counterclockwise 1/4 turn to open valve.
• Turn valve handle clockwise 1/4 turn to close valve.
Pump Drain Valve
This valve drains fluid from pump and some fluid lines.
• Turn handle counterclockwise 1/4 turn to open.
• Turn clockwise 1/4 turn to close.
Liquid Chemical Hopper Valve
This valve controls the flow of polymers or wetting agents to the
mixing system.
• Turn handle counterclockwise 1/4 turn to open valve.
• Turn handle clockwise 1/4 turn to close valve.

FM13V - CONTROLS 15
FM13V - CONTROLS 15
Dry Chemical Hopper Valve
This valve controls flow of dry chemicals into mixing venturi.
• Turn handle to left (counterclockwise) to open valve.
• Move handle to right (clockwise) to close valve.
IMPORTANT Do not open valve unless pump is running and
mixing venturi valve is open. Fluid could flow back into hopper.
Discharge Valve
This valve controls the flow of drilling fluid from mixing tank to
drilling unit.
• Turn handle counterclockwise 1/4 turn to open valve.
• Turn handle clockwise 1/4 turn to close valve.
Mixing Venturi Valve
This valve controls flow of fluid though mixing venturi at the
bottom of the dry hopper.
• Turn handle counterclockwise 1/4 turn to open.
• Turn handle clockwise 1/4 turn to close.
Dry Chemical Hopper Valve
This valve controls flow of dry chemicals into mixing venturi.
• Turn handle to left (counterclockwise) to open valve.
• Move handle to right (clockwise) to close valve.
IMPORTANT Do not open valve unless pump is running and
mixing venturi valve is open. Fluid could flow back into hopper.
Discharge Valve
This valve controls the flow of drilling fluid from mixing tank to
drilling unit.
• Turn handle counterclockwise 1/4 turn to open valve.
• Turn handle clockwise 1/4 turn to close valve.
Mixing Venturi Valve
This valve controls flow of fluid though mixing venturi at the
bottom of the dry hopper.
• Turn handle counterclockwise 1/4 turn to open.
• Turn handle clockwise 1/4 turn to close.

16 FM13V - CONTROLS 16 FM13V - CONTROLS

FM13V - SAFETY 17
FM13V - SAFETY 17
SAFETY
Follow these guidelines before operating any jobsite equipment:
• Complete proper training and read operator’s manual before
using equipment.
• Contact One-Call (888-258-0808) and any utility companies
which do not subscribe to One-Call. Have all underground
pipes and cables located and marked before operating
equipment. If you damage a utility, contact utility company.
• Classify jobsite based on its hazards and use correct tools
and machinery, safety equipment, and work methods for
jobsite.
• Mark jobsite clearly and keep spectators away.
• Wear personal protective equipment.
• Review jobsite hazards, safety and emergency procedures,
and individual responsibilities with all personnel before work
begins. Safety videos are available from your Ditch Witch
dealer.
• Replace missing or damaged safety shields and safety signs.
• Use equipment carefully. Stop operation and investigate
anything that does not look or feel right.
• Do not operate unit where flammable gas is present.
• Contact your Ditch Witch dealer if you have any question
about operation, maintenance, or equipment use.
SAFETY
Follow these guidelines before operating any jobsite equipment:
• Complete proper training and read operator’s manual before
using equipment.
• Contact One-Call (888-258-0808) and any utility companies
which do not subscribe to One-Call. Have all underground
pipes and cables located and marked before operating
equipment. If you damage a utility, contact utility company.
• Classify jobsite based on its hazards and use correct tools
and machinery, safety equipment, and work methods for
jobsite.
• Mark jobsite clearly and keep spectators away.
• Wear personal protective equipment.
• Review jobsite hazards, safety and emergency procedures,
and individual responsibilities with all personnel before work
begins. Safety videos are available from your Ditch Witch
dealer.
• Replace missing or damaged safety shields and safety signs.
• Use equipment carefully. Stop operation and investigate
anything that does not look or feel right.
• Do not operate unit where flammable gas is present.
• Contact your Ditch Witch dealer if you have any question
about operation, maintenance, or equipment use.

18 FM13V - SAFETY
ACCESSORIES 18 FM13V - SAFETY
ACCESSORIES
ACCESSORIES
Fire Extinguisher
If required, a fire extinguisher should be mounted near the power
unit but away from possible points of ignition. The fire
extinguisher should always be classified for both oil and electric
fires. It should meet legal and regulatory requirements.
ACCESSORIES
Fire Extinguisher
If required, a fire extinguisher should be mounted near the power
unit but away from possible points of ignition. The fire
extinguisher should always be classified for both oil and electric
fires. It should meet legal and regulatory requirements.

FM13V - SAFETY 19
SAFETY ALERT CLASSIFICATIONS
FM13V - SAFETY 19
SAFETY ALERT CLASSIFICATIONS
SAFETY ALERT CLASSIFICATIONS
These classifications and the icons defined on the following
pages work together to alert you to situations which could be
harmful to you, jobsite bystanders or your equipment. When you
see these words and icons in the book or on the machine,
carefully read and follow all instructions. YOUR SAFETY IS AT
STAKE.
Watch for the three safety alert levels: DANGER, WARNING and
CAUTION. Learn what each level means.
indicates a hazardous situation that, if not
avoided, will result in death or serious injury. This signal word is
to be limited to the most extreme situations.
indicates a hazardous situation that, if not
avoided, could result in death or serious injury.
indicates a hazardous situation that, if not
avoided, could result in minor or moderate injury.
Watch for two other words: NOTICE and IMPORTANT.
NOTICE indicates information considered important, but not
hazard-related (e.g., messages relating to property damage).
IMPORTANT can help you do a better job or make your job
easier in some way.
SAFETY ALERT CLASSIFICATIONS
These classifications and the icons defined on the following
pages work together to alert you to situations which could be
harmful to you, jobsite bystanders or your equipment. When you
see these words and icons in the book or on the machine,
carefully read and follow all instructions. YOUR SAFETY IS AT
STAKE.
Watch for the three safety alert levels: DANGER, WARNING and
CAUTION. Learn what each level means.
indicates a hazardous situation that, if not
avoided, will result in death or serious injury. This signal word is
to be limited to the most extreme situations.
indicates a hazardous situation that, if not
avoided, could result in death or serious injury.
indicates a hazardous situation that, if not
avoided, could result in minor or moderate injury.
Watch for two other words: NOTICE and IMPORTANT.
NOTICE indicates information considered important, but not
hazard-related (e.g., messages relating to property damage).
IMPORTANT can help you do a better job or make your job
easier in some way.

20 FM13V - SAFETY
SAFETY ALERTS 20 FM13V - SAFETY
SAFETY ALERTS
SAFETY ALERTS
Electric shock. Contacting electric
lines will cause death or serious injury. Know
location of lines and stay away.
Deadly gases. Lack of oxygen or
presence of gas will cause sickness or death.
Provide ventilation.
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
Crushing weight
could cause death or serious
injury. Use proper procedures and
equipment or stay away.
SAFETY ALERTS
Electric shock. Contacting electric
lines will cause death or serious injury. Know
location of lines and stay away.
Deadly gases. Lack of oxygen or
presence of gas will cause sickness or death.
Provide ventilation.
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
Crushing weight
could cause death or serious
injury. Use proper procedures and
equipment or stay away.