DivioTec TBR927 User manual

IP Camera
TBR927 and TBR927-W
User Manual
Released on 2024.01.12
Note: The manual is subject to change without notice

Content
ii
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
CONTENTS
Preface
Copyright ........................................................................................................... v
Disclaimer .......................................................................................................... v
Acknowledgements .......................................................................................... v
Safety Information ........................................................................................... v
RoHS Compliance ............................................................................................ vi
Installation Recommendations ..................................................................... vii
Technical Support and Assistance ................................................................ vii
Conventions Used in this Manual ................................................................ viii
Package Contents ............................................................................................ ix
Chapter 1: Product Introduction
Overview ........................................................................................................... 1
Key Features ..................................................................................................... 1
Hardware Specifications .................................................................................. 2
DI/O & Function Description ........................................................................... 4
DI/O Pin Definition & Waterproof Connector Description ............................ 5
Cable Wiring Description ................................................................................. 6
Cable Outlet Description .................................................................................. 7
Hardware Installation ...................................................................................... 8
3- axis Angle Adjustment .................................................................................. 9
Chapter 2: Camera Configuration
Accessing the Camera’s Configuration Menu (Graphical User Interface) 10
Installing IP-FINDER Software ..................................................................... 10
IP-FINDER ................................................................................................... 13
Introduction to the IP-FINDER User Interface ........................................ 14
Web Browser .......................................................................................... 15
Live View ................................................................................................. 16
Configuring the Camera’s Setting ................................................................ 17
Browsing Through the Configuration Menu ............................................ 17
Video - Video Configuration .................................................................. 18
Video - Audio Configuration .................................................................. 21
Video - Digital Zoom .............................................................................. 22
Image - Exposure .................................................................................... 23
Image - Basic Settings ............................................................................. 26
Image - ROI .............................................................................................. 28
Image - Privacy Zone .............................................................................. 29
Image - OSD ............................................................................................ 30
Network - Basic ....................................................................................... 31
Network - FTP .......................................................................................... 33
Network - SSL .......................................................................................... 34
Network - 802.1x ................................................................................... 35

Content
iii
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
Network - SNMP ..................................................................................... 36
Network - Firewall .................................................................................. 37
Network - LDAP ...................................................................................... 38
Network - DDNS ..................................................................................... 39
Network - RTSP ...................................................................................... 40
Network - Bonjour / Upnp ..................................................................... 42
System - Date / Time ............................................................................ 43
System - Maintenance ........................................................................... 44
System - User Management ................................................................. 47
System - Homepage Layout ................................................................. 49
Event - Alarm Handler ........................................................................... 50
Event - Motion Detection ...................................................................... 51
Event - Tampering Alarm ...................................................................... 53
Event - Network Loss Detection ........................................................... 54
Event - FTP Upload ................................................................................ 55
Event - SMTP Notification ..................................................................... 56
Event - Network Storage ....................................................................... 58
Event - Relay Handler ............................................................................ 60
Event - SD Record Handler ................................................................... 61
Event - TCP Notify ................................................................................. 63

Preface
v
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
PREFACE
Copyright
This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved. No
part of this manual may be reproduced, copied, translated or transmitted in
any form or by any means without the prior written consent from DivioTec
INC.
Disclaimer
The information in this document is subject to change without prior notice and
does not represent commitment from DivioTec INC. However, users may update
their knowledge of any product in use by constantly checking its manual posted
on our website: http://www.diviotec.com. DivioTec shall not be liable for
direct, indirect, special, incidental, or consequential damages arising out of the
use of any product, nor for any infringements upon the rights of third parties,
which may result from such use. Any implied warranties of merchantability
or fitness for any particular purpose is also disclaimed.
Acknowledgements
TBR927 and TBR927-W are trademarks of DivioTec INC. All other product
names mentioned herein are registered trademarks of their respective
owners.
Safety Information
Before installing and using the device, note the following precautions:
▪ Read all instructions carefully.
▪ Follow all warnings and cautions in this manual.
▪ Do not place the unit on an unstable surface, cart, or stand.
▪ Do not use the camera in extreme temperature conditions. Please use
the camera within 0ºC to 40ºC. Air vent is required at high temperature.
▪ Do not use or store the camera in humid environment. It may cause poor
image quality.
▪ Do not use the camera in unstable lighting conditions. Inconsistent
lighting or flickering may cause poor image.
▪ Never use the camera close to gas or oil leak. It may not operate properly.
▪ Do not disassemble the camera. There is no user serviceable part inside.
▪ Do not drop the camera or apply force on it. It may cause a malfunction.
▪ Avoid using the system near water, in direct sunlight, or near a heating
device.
▪ Never face the camera to strong light for long periods of time. It may
damage the sensor.

Preface
vi
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
RoHS Compliance
DivioTec RoHS Environmental Policy and Status
Update
DivioTec is a global citizen for building the digital
infrastructure. We are committed to providing green
products and services, which are compliant with
European Union RoHS (Restriction on Use of Hazardous Substance in
Electronic Equipment) directive 2011/65/EU, to be your trusted green
partner and to protect our environment.
RoHS restricts the use of Lead (Pb) < 0.1% or 1,000ppm, Mercury (Hg) < 0.1%
or 1,000ppm, Cadmium (Cd) < 0.01% or 100ppm, Hexavalent Chromium
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or
1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm.
In order to meet the RoHS compliant directives, DivioTec has established
an engineering and manufacturing task force to implement the introduction
of green products. The task force will ensure that we follow the standard
DivioTec development procedure and that all the new RoHS components
and new manufacturing processes maintain the highest industry quality
levels for which DivioTec are renowned.
The model selection criteria will be based on market demand. Vendors and
suppliers will ensure that all designed components will be RoHS compliant.
How to recognize DivioTec RoHS Products?
For existing products where there are non-RoHS and RoHS versions, the
suffix “(LF)” will be added to the compliant product name.
All new product models launched after January 2013 will be RoHS compliant.
They will use the usual DivioTec naming convention.

Preface
Installation Recommendations
Ensure you have a stable, clean working environment. Dust and dirt can get
into components and cause a malfunction. Use containers to keep small
components separated.
Adequate lighting and proper tools can prevent you from accidentally
damaging the internal components. Most of the procedures that follow
require only a few simple tools, including the following:
▪ A Philips screwdriver
▪ A flat-tipped screwdriver
▪ A grounding strap
▪ An anti-static pad
Using your fingers can disconnect most of the connections. It is recommended
that you do not use needle-nose pliers to disconnect connections as these
can damage the soft metal or plastic parts of the connectors.
Technical Support and Assistance
1. For the most updated information of DivioTec products, visit
DivioTec’s website at www.diviotec.com.
2. For technical issues that require contacting our technical support team or
sales representative, please have the following information ready before
calling:
– Product name and serial number
– Detailed information of the peripheral devices
– Detailed information of the installed software (operating system,
version, application software, etc.)
– A complete description of the problem
– The exact wordings of the error messages
Warning!
1. Handling the unit: carry the unit with both hands and handle it with care.
2. Maintenance: to keep the unit clean, use only approved cleaning products
or clean with a dry cloth.
Copyright © 2024 DivioTec INC. All Rights Reserved. vii TBR927 and TBR927-W User Manual

Preface
Conventions Used in this Manual
Warning:
Information about certain situations, which if not observed,
can cause personal injury. This will prevent injury to yourself
when performing a task.
Caution:
Information to avoid damaging components or losing data.
Note:
Provides additional information to complete a task easily.
Copyright © 2024 DivioTec INC. All Rights Reserved. viii Tbr927 and TBR927-W User Manual

Preface
ix
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
Package Contents
The TBR927 and TBR927-W package contain the following accessories:
Name
Quantity
Placement sticker
1
Quick installation guide
1
Mounting accessory kit
1
Waterproof connector
1
3-axis cable concealed wall mount bracket
1
Dehumidifier packet
1
Wall mount base
1
Placement sticker
Quick installation
Mounting accessory
Waterproof
3-axis cable concealed
Dehumidifier
Wall mount
guide
kit
connector
wall mount bracket
packet
base

Chapter 1: Product Introduction
x
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
CHAPTER 1: PRODUCT INTRODUCTION
Overview Key Features
▪ 30fps@5MP
▪ IR LED 45M / White LED 15M
▪ Capture Plate Distance 10M~20M
▪ Support De-icing function
▪ 5mm -- 50mm Advance P-Iris
▪ 120 dB True WDR

Chapter 1: Product Introduction
2
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
Hardware Specifications
Camera
▪ Image sensor: 1/2.8” 5MP True WDR progressive scan CMOS sensor
▪ Minimum Illumination: B/W 0 lux / Color 0.04 lux
▪ Lens: 5mm~50mm Motorized Lens, F2.1
▪ Field of View:
– Horizontal:8°~48°
– Vertical:6°~35°
– Diagonal:10°~60°
▪ Iris type: P-iris
▪ Day and night: Yes (True D/N)
▪ IR distance:
– TBR927: 45M (IR LED)
– TBR927-W: 15M (White LED)
▪ Target Capture Plate: Reflective
▪ De-icing: Support (available above -10°C)
▪ Car Moving Speed: 0~50KM/h
▪ IR wavelength: 850nm
▪ ICR: Yes
▪ WDR: YES (True WDR), 120dB
▪ Image Enhancement
– Brightness, Contrast, Saturation, Sharpness, Hue, Rotation, Flip, Day/
Night, Anti-flicker, AWB, BLC, Corridor
Video
▪ Video compression: H.264/H.265/M-JEPG
▪ Video streaming: Triple streaming
▪ Video quality: VBR/CVBR
▪ Frame rate:
– 2592x1944 @30 fps
– 2560x1440 @30 fps
– 1920x1080 @30 fps
– 1280x960 @30fps
– 640x480 @30fps
– 640x360 @30fps
Audio
▪ Audio streaming: Two-way
▪ Audio compression: G.711 8KHz/ 16-bit
▪ Audio input: Line-in
▪ Audio output: Line-out
Network
▪ Interface: 10/100 Mbps ETHERNET, RJ-45
▪ Supported protocols: HTTP, HTTPS, TCP/IP, UDP, RTP, RTSP, RTCP, FTP
client ,FTP server, SMTP,NFS, DHCP, DNS, DDNS,
NTP, uPnP, ONVIF, IPv4/v6, SNMP,SSL, LDAP,
802.1x, BT28181, SSH
▪ Browser: Internet Explorer, Chrome, Firefox, Safari
▪ Security: Multi-level passwords/ HTTP encryption

Chapter 1: Product Introduction
3
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
I/O Connector
▪ Audio in/out port: 3.5mm phone jack x1
▪ D I/O: DI x1, DO x1
▪ RS485: N/A
▪ Micro SD slot: Yes, SD card slot x1
▪ RJ45: Yes
Event Management
▪ Event trigger: Alarm, Motion detection, Sabotage
▪ Notifications: Trigger alarm output, e-mail/FTP and record Snapshot/
video to Network storage or SD card
▪ Post-recording: Yes
▪ Pre-recording: Yes
Power
▪ DC/AC: DC 12V/AC 24V terminal block
▪ PoE: Yes/IEEE 802.3at (PoE+)
General
▪ Power consumption:
– TBR927: 25W
– TBR927-WH: 30W
▪ Weight: 3kg
▪ Dimension: 317.23mm (D) x 161mm (W) x 263.3mm (H)
▪ Operating Temp.: -40°C~60°C / -40°F~140°F
▪ Humidity: 90% RH (no condensation)
▪ Certification: CE/FCC
▪ Vandal resistant: IK10
▪ Weather Proof: IP67
▪ Application: SDK available for application development
▪ Heater: Optional
Packaging Information
▪ NWT: 3kg
▪ GWT: 3.1kg
▪ Dimension: 311mm (D) x 286mm (W) x 178mm (H)

Chapter 1: Product Introduction
4
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
2 3
3-2
3-3
3-4
3-1
3-7
3-8
3-5
3-6
DI/O & Function Description
55o Rotate 180o Rotate 360o Rotate
No.
Item
No.
Item
1
8 PCS LED IR Illuminator Board Plate
3
MB Module
2
SB Module
4
Dehumidier Packet
No. Item
No. Item
3-1
Ethernet / PoE
3-5
Micro SD
3-2
DC 12V / AC 24V
3-6
DI/DO
3-3
Line-out
3-7
Reset
3-4
Line-in
3-8
Default

Chapter 1: Product Introduction
5
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
DI/O Pin Definition & Waterproof Connector Description
Waterproof connector
DI/O Power Waterproof connector
Pin
Description
1
ALM_IN (+)
2
ALM_IN (-)
3
ALM_out_NC
4
ALM_out_COM
5
ALM_out_NO
No.
Description
1
AC24V/DC12V (+)
2
AC24V/DC12V (-)
No. Description
1
Gasket
2
Main body
3
Tightening collar
4
Strain relief
5
Seal nut
Power 2 1

Chapter 1: Product Introduction
6
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
Cable Wiring Description
1. Run the cable inside the wall mount bracket and out through the cable
opening at the front.
2. Wire the network cables to the waterproof connector on the right, and
wire the line-in, line-out, DC 12V/AV 24V, DI/DO and other cables to
the waterproof connector on the left. Tighten the waterproof connector
after all the cables are secured in place.
3. Secure the camera onto the wall mount bracket using the four screws
provided. Unscrew the 2 screws on the camera’s top cover at the side in
preparation for the next step.
4. Open the camera’s top cover to access the wired cables. Install the RJ45
connector to the Ethernet cable and plug it into the corresponding port
on the MB module.
5. Close the camera’s top cover and secure it with the supplied hardware
tool to complete.

Chapter 1: Product Introduction
7
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
Cable Outlet Description
Ethernet/POE
Line-out/Line-in
DC 12V/AC 24V
DI/DO
1. The camera features two waterproof connectors, the right one in the
diagram is for PoE connection, while the left one is for line-in, line-out,
DC 12V/AC 24V, and DI/DO connections.
2. The left one features four wire holes. Please cover unused holes with
sealing plugs to prevent water from entering.
3. Applicable cable diameter:
* Ø 1.8~2.5mm (Left)
* Ø 4.7~6.9mm (Right)

Chapter 1: Product Introduction
8
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
Hardware Installation
4. Secure the camera to the wall mount bracket with the four screws and
hex wrench. Open the camera’s cover and connect the cables to their
corresponding ports on the MB module. Then, glue the dehumidifier
packet onto the metal bracket using the adhesive sticker on its back,
as depicted in the diagram below. Quickly close the camera’s cover and
ensure the clip is locked in position to prevent the dehumidifier packet
from losing its effectiveness.
5. Secure the top cover to finish the installation.
1. Position the placement sticker at the desired installation location and use
a driller to drill the holes on the sticker.
2. Insert three screw anchors into the holes then place the wall mount base
on top of them with the mounting holes aligned.
3. Wire the required cables through the cable opening on the front of the
wall mount bracket. Then, attach and secure the wall mount bracket to
the wall mount plate with two M5 screws. Next, install the waterproof
connectors onto the cables on the front of the wall mount bracket.
Dehumidifier packet

Chapter 1: Product Introduction
9
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
3- axis Angle Adjustment
1. The vertical tilt angle of the camera can be adjusted up or down within
an angle of 55°. Loosen the left and right screws depicted below to
adjust the vertical tilt angle and then tighten the screws after finishing
the adjustment.
3. The rotatable axis can be rotated in 360°. Loosen the left and right screws
depicted below to adjust the 360-degree position and then tighten the
screws after finishing the adjustment.
2. The horizontal tilt angle of the camera can be adjusted left or right within
an angle of 180°. Loosen the left and right screws depicted below to
adjust the horizontal tilt angle and then tighten the screws after finishing
the adjustment.

Chapter 2: Camera Configuration
10
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
CHAPTER 2: CAMERA CONFIGURATION
Accessing the Camera’s Configuration
Menu (Graphical User Interface)
The camera’s default IP address is 192.168.1.168, make sure the IP address
of the computer accessing the camera is on the same network subnet
before proceeding.
You can access the camera via a web browser or IP-FINDER software. The
following information outlines the instructions for each method.
Installing IP-FINDER Software
If the IP-FINDER is already installed, you can skip this section and continue to
the section of IP-FINDER.
1. Download the IP-FINDER installer file.
2. Unzip the IP-FINDER file to a location on the hard drive.
3. Once unzipped, double click on the setup file to start the installation
program.
4. Click the Next button on the welcome screen to continue.

Chapter 2: Camera Configuration
11
Copyright © 2024 DivioTec INC. All Rights Reserved.
TBR927 and TBR927-W User Manual
5.1
5.2
5.3
5. To continue the installation using the default directory of the drive, click
Next.
5.1 To specify a different folder, click Browse and locate the desired
installation folder.
5.2 To check the available drives and their available and required disk space
for installing the software, click Disk Cost. When clicking the Disk
Cost button, a pop-up window will appear on the screen to show the
disk information.
5.3 Specify which user accounts on the computer can access the program,
the options are Everyone and Just me.