5
•Push button 2and the pump starts filling the boiler, light 8goes on. Filling is
automatically performed when required by the water level.
•When the pump stops, light 8goes out and the heating phase begins, lasting approx. 9
minutes. The light 9 is blinking.
•When pilot light 9remains on, the machine is ready for use.
•Insert the hose plug into the steam socket 14, ensuring that it is securely fitted.
•Press the steam button 16.1 on the handgrip and direct the steam jet towards the area
to be cleaned.
CAUTION
Before beginning steam-cleaning operations, drain the condensation left inside the steam
hose into a bucket or other suitable place.
Hot water / Detergent injection function :
To optimise the cleaning action of the steam, water or even detergent can be mixed with the
steam jet:
•Open the cap 12 and fill this tank with 5l of detergent (or of water).
•Start the machine as above.
•Operate the steam button on the handgrip and simultaneously keep the
water/detergent button pressed.
CAUTION
This machine has been designed for use with non-foaming and non-corrosive detergent. Use
of foaming and/or corrosive detergent could damage the machine! You are advised to use
only the detergent specified by the manufacturer.
Dust –liquid vacuum cleaning function :
•Connect the steam + suction hose to the steam socket 14 ensuring that it is securely
fitted.
•Turn on the main switch located behind the vacuum cleaner.
•Start the steam machine as indicated above.
•To use the steam, press lever 16.1 below the handgrip 16.3
•For suction, press the white button on the handgrip. Press once to switch on, and a
second time to switch off.
•To add hot water, keep the button 16.2 with water tap on the handgrip pressed.
CAUTION
This machine is not suitable for collecting dangerous dust!
Water refill :
When the water in the tank finishes, the machine emits an acoustic signal and the no water
warning light 7comes on. After some minutes the steam outlet is blocked.
