Donco V-120-1 User manual

Thank you for purchasing this quality product.
Be sure to check all packing material carefully
for small parts which may have come loose
inside the carton during shipment. Separate,
identify and count all parts and hardware.
Compare with the parts list to be sure all parts
are present.
“DO NOT TIGHTEN SCREWS
UNTIL COMPLETELY ASSEMBLED”
SIZE OF MATTRESS AND FOUNDATION (SUPPORT)
total thickness must not exceed 9 ” inchess. Do not use mattress without the proper bunkie board or safe
foundation.
Note: There must be at least 5” inches from top surface of mattress to top edge or guardrails.
REPLACEMENT PARTS.
Replacement parts, including additional guardrails, may be obtained from place of purchase or original
distribution.
SAFETY WARNINGS!
1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2- Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
of entrapment or falls.
3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4- Do not allow children under 6 years of age to use the upper bunk.
5- Prohibit more than one person on upper bunk.
6- Periodically check and ensure that the guardrail, ladder and other components are in their proper posi-
tion, free from damage, and that all connectors are tight.
7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8- Always use the ladder for enterning and leaving the upper bunk.
9- Do not use substitute parts. Contact manufacturer or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.
11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should
be placed against the wall to prevent entrapment between the bed and the wall.
12-Always use guard rails on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instructions for future reference.
15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THE ASSEMBLY
nt
Isctions
u
r
s
nt
Ictions
u
r
TO OBTAIN PARTS, PLEASE CONTACT: DONCO TRADING COMPANY - FORT WORTH, TEXAS
ASSEMBLY INSTRUCTIONS
This bed is designed to use a twin mattress ( 37 ½”- 38 ½” x 74 - 75”) and bunkie board (37 ½ “ x 74”). The
V-120-1 MISSION BUNK BED
D
K
All manuals and user guides at all-guides.com
all-guides.com

ASSEMBLY INSTRUCTIONS
V-120-1 MISSION BUNK BED
Thank you for purchasing this quality product. Be sure to check all packing
material carefully for small parts which may have come loose inside the
carton during shipment. Separate, identify and count all parts and hardware.
Compare with the parts list to be sure all parts are present.
“DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED”
IMPORTANT:
PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY
* Use of power tool to assemble this
product will invalidate any claim and
damage this product making unsafe !!!
* Please assemble on a clean soft
surface to avoid damage.
!
(Hammer)
+
2:00 h
Tools Required
(Not includ)
D
K
All manuals and user guides at all-guides.com

Part List - V-120-1 MISSION BUNK BED
Identifying the Hardware/part list- Identify the hardware using the illustrations below.
C 70 x 50 Screw 11
Qty
10 x 40 Wood Dowel
01
26
Hex Screwdriver
Qty
Qty
F
3,5 x 30 Screw
3,5 x 16 Screw
E38
06
06
10 x 110 Wood Dowel
1/4 x110 Screw
7,0 x100 Screw
A
D
H
G
Qty
Qty
16
04
Half Moon
BQty
16
1/4"
J
I
02
Qty
Qty
Qty
Qty
WARNING LABEL
All manuals and user guides at all-guides.com

01
10 x 40 Wood Dowel
I22
Qty
I
02
I
X1
I
SD
IERAIL FOR UP BED-LADDERID
S E
ATTENTION!!
X2
I
X3
I
I
X2
X4
I
I
HOLE
I
I
J02
Qty
08
7,0 x 50 Screw
CQty
H04
Qty
01
Qty
Hex Screwdriver
F
3,5x16 Screw
C
C
C
C
C
F
Hx4
J
All manuals and user guides at all-guides.com

G
03
04
10 x 40 Wood Dowel
I04
Qty
01
Hex Screwdriver
Qty
1/4 X110 Screw
Qty
08
Ax2
F
Bx2
Half Moon
Qty
08
1/4"
A
BF
Ax2
Ax2
Bx2
F
Ax2
F
Bx2
B
B
3,5 x 30 Screw
E16
Qty
10 x 110 Wood Dowel
GQty
04
B
B
BOTTOM BED
E
E
E
E
E
E
E
E
E
E
E
E
TOP HEADBOARD
TOP FOOTBOARD
X2
BOTTOM HEADBOARD
FOOTBOARD
I
I
I
I
G
All manuals and user guides at all-guides.com

05
06
E
E
E
E
E
E
EE
E
3,5 x 30 Screw 08
Qty
Bx2
Ax2
Ax2
Ax2
Ax2
Bx2
D
D
D
D
F
F
F
F
F
F
F
Bx2
Bx2
04
7,0 x100 Screw
DQty
A
B
Qty
08
1/4 x110 Screw
Half Moon
Qty
08
1/4"
F01
Hex Screwdriver
Qty
E
SIDE-RAIL
SLAT
B
B
B
B
TOP BED
HOLE
I
R
PEDRLLED
KS
MAR
I
PRD
ERLLED
KS
M
I
R
PERLLED
KS
MAR
I
PRERLLED
KS
MAR
I
PREDRLLED
KS
MAR
I
PRD
ERLLED
KS
M
AR
I
R
PEDRLLED
KS
MAR
I
PRD
ERLLED
KS
MAR
!
Please refer to the diagram on the left for
placement of the cross-slatscorrect
3”
=
=
=
3”
All manuals and user guides at all-guides.com
all-guides.com

07
08
E
E
E
E
E
EE
E
I
R
PEDRLLED
KS
MAR
I
PRD
ERLLED
KS
MAR
I
PREDRLLED
KS
MAR
I
PREDRLLED
KS
MAR
I
R
PEDRLLED
KS
MAR
I
PREDRLLED
KS
MAR
I
PREDRLLED
KS
MAR
I
PRD
ERLLED
KS
MAR
!
Please refer to the diagram on the left for
placement of the cross-slatscorrect
3”
=
=
=
3”
E
SIDE-RAIL
SLAT
E3,5 x 30 Screw 08
Qty
All manuals and user guides at all-guides.com

09
10
D
K
Ex3
C
F
D
K
C
C
7,0 x 50 Screw
7,0 x 50 Screw
01
02
Qty
Qty
F
F
01
01
Hex Screwdriver
Hex Screwdriver
Qty
Qty
3,5 x 30 Screw
3,5 x 30 Screw
E
E03
Qty
Qty
F
Cx2
Ex3
F
C
Guard Rails
FD
FD
D02
7,0 x100 Screw
Qty
0303
03
All manuals and user guides at all-guides.com

11
D
K
SIDE-RAIL
H
3,5 x 16 Screw 02
HQty
All manuals and user guides at all-guides.com