Dorel Asia DA7229W User manual

WHITE
ESPRESSO
LOT NUMBER:
(TAKEN FROM CARTON)
NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, Contact our
customer service department. We will
replace the part FREE of charge.
Tel # : [phone]
E-Mail: [e-mail]
Fax #: [phone]
______ / ______ / ______
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
DATE OF PURCHASE:
DOREL ASIA
0-65857-16948-5
UPC CODE:
MODEL NO:
DA7229W (WHITE)
DA7229E (ESPRESSO)
0-65857-16947-8
Toddler to Twin
Convertible Bed
KEEP FOR FUTURE REFERENCE.
INFORMATION. PLEASE READ AND
NOTE:

*
*
*
*
*
*
*
*
*
*When assembled as a twin size bed, use only a coil spring twin size mattress.
* Ensure all parts and components are present before beginning assembly.
* Phillips head screwdriver is not included.
* Assembly will require 2 people.
* Estimated assembly time: 45 minutes.
* DO NOT use power tools.
*
Caution: Adult assembly required.
* DO NOT lift bed from side rails when moving. Raise from headboard and footboard when
moving bed.
* STORE ALL UNUSED PARTS IN A DRY PLACE FOR FUTURE USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
avoid the formation of a gap between the mattress and the bed that could cause an entrapment.
Montreal, Quebec
Canada, H1G 3L1
E-MAIL: [email protected]
WARNING ENTRAPMENT/STRANGULATION HAZARD:
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and assembly instructions could result in serious injury or
DO NOT place TODDLER BED near windows where cords from blinds or drapes may
strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings
or pacifier cords.
DO NOT suspend strings over a TODDLER BED for any reason.
death from entrapment or strangulation.
NEVER use bed with children under 15 months.
The TODDLER BED is not intended for children under 15 months of age or over 50 pounds
(22.7kg).
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to
When assembled as a toddler bed, any mattress used must be at least 27-1/4 inches by 51-5/8
inches (69cm by 131cm) with a minimum thickness of 4 inches (10cm) and not exceeding 6 inches
(15cm).
NOTES

LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair
or replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. This warranty gives you
specific legal rights and you may also have other rights which vary from State to State.
WARNING: Should this product
become damaged, and/or components
are broken or missing, DO NOT USE.
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
MAINTENANCE
Check bolts periodically and tighten if necessary.

HARDWARE LIST
1 2
3 4
5 6
7 8
910
Φ 4mm x 35mm
BOLTS
4 PCS
WOOD DOWEL
8 PCS
Φ 8mm x 30mm
Φ 9mm x 17mm
BOLTS
8 PCS
BARREL NUT
12 PCS
Toddler to Twin Convertible Bed
DA7229W / DA7229E
Φ 1/4" x 90mm
Φ 1/4" x 45mm
Φ 1/4" x 32mm
Φ 11.8mm x 15mm
BOLTS
22 PCS
BOLTS
14 PCS
FLAT HEAD SCREW
6 PCS
HEX KEY
1 PC
WOOD DOWEL
18 PCS
HEX CAP
8 PCS
Φ 1/4" x 135mm
Φ 10mm x 50mm

PARTS LIST
A B C
D E F
2 PCS
HEADBOARD PANEL
1 PC
HEADBOARD PANEL
FOOTBOARD PANEL
Toddler to Twin Convertible Bed
DA7229W / DA7229E
FOOTBOARD PANEL
1 PC
1 PC
1 PC
HEADBOARD POST
2 PCS
FOOTBOARD POST

PARTS LIST
G H I
J K L
M N O
P Q R
S T
SUPPORT POST
1 PC
9 PCS
2 PCS
2 PCS
TWIN BED TOP RAIL
2 PCS
TWIN BED BOTTOM RAIL
2 PCS
SHORT SIDE RAIL
LONG CROSSPIECE
TODDLER BED SLAT
TODDLER BED BOTTOM RAIL
SHORT SIDE RAIL
1 PC
1 PC
Toddler to Twin Convertible Bed
DA7229W / DA7229E
LONG SIDE RAIL
LONG SIDE RAIL
SHORT CROSSPIECE
TODDLER BED TOP RAIL
2 PCS
2 PCS
1 PC
1 PC
SUPPORT BAR
TWIN BED SLATS
2 PCS
1 PC

Toddler to Twin Convertible Bed
DA7229W / DA7229E
STEP 1
Slide headboard panel (C ) into headboard panel (D). Make sure the raised edges go into the grooves
on headboard panels ( C & D).
Secure the headboard panels (C & D) using bolts (7) and hex key (10) as shown.
Attach the toddler bed top rail (I) and toddler bed bottom rail (J) to the headboard panels (C & D) using
bolts (2) and hex key (10).
Raised Edges

Toddler to Twin Convertible Bed
DA7229W / DA7229E
STEP 2
Slide footboard panel (E ) into footboard panel (F).
Attach the footboard panels (E & F) using bolts (7) and hex key (10).
Attach the toddler bed top rail (I) and toddler bed bottom rail (J) to the footboard panels (E &
F) using bolts (2) and hex key (10).

Toddler to Twin Convertible Bed
DA7229W / DA7229E
STEP 3
Insert wood dowels (8) into the holes of the headboard panels (C & D) and footboard panels
(E & F).
Attach headboard posts (A) to the headboard panels (C & D) and footboard posts (B) to
footboard panels (E & F) using bolts (1) and hex key (10) as shown.
8
8

STEP 4
Insert barrel nuts (4) into both ends of the short side rails (K & L).
Attach short side rails (K & L) to support posts (R) and footboard posts (B) using bolts (1)
and hex key (10) as shown.
Use a Philips head screwdriver (not included) to rotate the barrel nuts to align with bolts (1).
NOTE: Support posts (R) must be attached so that they are flush with short rails (K & L) from the inside.
Toddler to Twin Convertible Bed
DA7229W / DA7229E
INSIDE VIEW- Post
(R) is
flush with short side rail
from the interior of the bed
OUTSIDE VIEW- Post
(R) is
NOT flush against short side
rail from the outside
INSIDE
INSIDE

Toddler to Twin Convertible Bed
DA7229W / DA7229E
STEP 5
Attach the short crosspieces (O) to long crosspiece (P) using hex caps (6), bolts (3) and hex
key (10) as shown below.
Attach the short crosspieces (O) to the support posts (R) using bolts (2) and hex key (10).

Attach the support bars (S) to the footboard panels (E & F) using bolts (2), and to short
crosspieces (O) using bolts (1) as shown.
Use hex key (10) to tighten all bolts.
Toddler to Twin Convertible Bed
DA7229W / DA7229E
STEP 6

Toddler to Twin Convertible Bed
DA7229W / DA7229E
STEP 7
Insert barrel nuts (4) into ends of the long side rails (M & N).
Attach the long side rails (M & N) to headboard posts (A) with bolts (1) and hex key (10).
Use a Philips head screwdriver (not included) to rotate barrel nuts (4) to align with bolts (1).
NOTE: Do not fully tighten the bolts(1). This will facilitate assembly in the following steps.

Insert the toddler bed slats (Q) between long side rails (M & N).
Ensure the wood dowels (5) go into the holes on long side rail (M & N).
Toddler to Twin Convertible Bed
DA7229W / DA7229E
Insert wood dowels (5) into ends of the toddler bed slats (Q) as shown.
STEP 8

Place the headboard assembly (with the long side rails and slats) over the footboard
assembly (with the short side rails and crosspieces).
Attach the long side rails (M & N) to the short side rails (K & L) using bolts (3) and hex
caps (6) as shown below with hex key (10).
That's it ! You've finished assembling your toddler bed.
Toddler to Twin Convertible Bed
DA7229W / DA7229E
STEP 9

The patent pending design of the Baby Relax
convertible bed allows you to transform your toddler
bed into a twin size bed! Carefully follow the following
steps to convert your bed.
Toddler to Twin Convertible Bed
DA7229W / DA7229E
TWIN BED CONVERSION

STEP 10
Toddler to Twin Convertible Bed
DA7229W / DA7229E
Loosen the bolts (2) to remove the top and bottom rails (I & J) from the headboard and
footboard with hex key (10).

STEP 11
Once long crosspiece (P) is detached, slightly extend the headboard and footboard and remove toddler
bed slats (Q) and wood dowels (5).
Once slats (Q) are removed, extend the headboard and footboard panels, whle ensuring they don’t slide
apart.
Toddler to Twin Convertible Bed
DA7229W / DA7229E
Remove bolts (7) from the headboard panels (C & D) and footboard panels (E & F) using hex key (10).
Detach long crosspiece (P) from short crosspieces (O) by removing bolts (3) and hex caps (6) using hex
key (10).

STEP 12
Toddler to Twin Convertible Bed
DA7229W / DA7229E
Slide the 2 halves of the bed so that the holes in long crosspiece (P) align with the holes in the 2 short
crosspieces (O), as shown below. Attach long crosspiece (P) to short crosspieces (O), using bolts (3) and hex
caps (6). Use hex key (10) to tighten bolts.
Attach twin bed top rails (G) and twin bed bottom rails (H) to the headboard and footboard assemblies, using
bolts (7) and bolts (2) as shown. Use hex key (10) to tighten bolts.
NOTE: The bolts on posts (A & B) may need to be loosened to facilitate attachment of bottom rails (H).
It may be easier to place the bed on its side to attach some of the bolts.

Toddler to Twin Convertible Bed
DA7229W / DA7229E
STEP 13
Remove bolts (3) and hex caps (6) from the short and long side rails (K & M) and (L & N)
with hex key (10) as shown below.
Extend the short and long side rails (K & M) and (L & N) to the length of a twin size
bed.