Dorel Asia DA6853C User manual

Model No:
DA6853C
_______ / _______ / _______
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
_____________________________________
Date of purchase:
DOREL ASIA
UPC CODE:
0-65857-16961-4
NOTE:
2 Pack CH Dining Chairs
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
*
Estimated assembly time: 30 minutes.
CARE AND CLEANING
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood
furniture.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty
does not apply to any product which has been improperly assembled, subjected to misuse or abuse
or which has been altered or repaired in any way. This warranty gives you specific legal rights and
you may also have other rights which vary from State to State.
Phillips head screw driver is not included.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly will require two people.
E-MAIL: [email protected]
NOTES:
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to product finish.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.

8 PCS
12 PCS
1 PC
ALLEN KEY
7
Ø5/16" X 19MM
Ø5/16" X 11MM
WOOD SCREW
2 PCS
8 PCS
5
6
BOLT
BOLT
BOLT
FLAT WASHER
SPRING WASHER
3
Ø5/16" X 2-1/4"
Ø3 X 38MM
18 PCS
Ø5/16" X 1-1/2"
Ø5/16" X 3"
4
18 PCS
2 Pack CH Dining Chairs
DA6853C
HARDWARE LIST
1
2

C
D
B
PARTS LIST
2 Pack CH Dining Chairs
DA6853C
2 PCS
2 PCS
RIGHT LEG
RIGHT SIDE STRETCHER
2 PCS
2 PCS
E
F
FRONT STRETCHER
LEFT SIDE STRETCHER
2 PCS
A
SEAT FRAME
BACK FRAME
2 PCS
2 PCS
G
LEFT LEG

STEP 1
2 Pack CH Dining Chairs
DA6853C
Attach seat frame (B) to back frame (A) with bolts (4), spring washers (2) and flat washers (1)
through the corners of seat frame (B).
Secure the center of seat frame (B) to back frame (A) with bolt (3), spring washer (2) and flat
washer (1).
Use Allen key (7) to install the bolts.
NOTE: Do not fully tighten the bolts. Leaving them loose will facilitate assembly in the
following steps.
3
2
1
37
A
B
4

STEP 2
2 Pack CH Dining Chairs
DA6853C
Insert front stretcher (E) into left leg (C) and right leg (D).
Attach the legs (C & D) to seat frame (B) with bolts (5), spring washers (2) and flat washers (1).
Use Allen key (7) to install the bolts.
NOTE: Do not fully tighten the bolts. Leaving them loose will facilitate assembly in the following
steps.
5
5
2
1
7
E
D
C
A
B
DC
E

STEP 3
2 Pack CH Dining Chairs
DA6853C
Insert side stretchers (F & G) into back frame (A) and legs (C & D).
Secure front stretcher (E) and side stretchers (F & G) to legs (C & D) and back frame (A) with
wood screws (6) using a Phillips head screw driver (not included).
Tighten all the previously installed bolts in this step.
Repeat Steps 1-3 to assemble the remaining chair.
NOTE: The stretchers must be attached so that the holes for wood screws (6) will face the
ground once the chair is in the upright position. See below illustration.
The holes on the
stretchers will face
the ground once the
chair is turned over.
6
E
G
A
B
6
D
C
F

That's it ! You've finished assembling your dining chairs.
2 Pack CH Dining Chairs
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
DA6853C
Dust regularly with a soft, lint-
free cloth to prevent soil build-up.
A damp cloth may be used
occasionally to clean surface. Dry
immediately. Do not use any
abrasives that may damage finish.
Excessive exposure to sunlight
and extreme changes in
temperature and moisture can
damage wood furniture.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

MODEL #: DA6853C
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Phone Number 1-800-295-1980
Email: [email protected]
Customer Service Fax Number 514-353-7819
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1