Dorel Asia WM2412RDC User manual

5-PIECE DINING SET
(TAKEN FROM CARTON)
DOREL ASIA
Model No:
UPC CODE:
0-65857-15763-5
NOTE:
WM2412RDC
_______ / _______ / _______
Lot number:
Date of purchase:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*Ensure all parts and components are present before beginning assembly.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
You can also order parts by writing to the address listed below. Please include the product model number, color and a
detailed description of the part.
E-MAIL: [email protected]
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CALL 1-800-295-1980
* Read all instructions completely before assembly.
* Do not use power tools.
* Phillips head screw driver is not included.
* CAUTION: Adult assembly required.
CARE AND CLEANING
WARNING
* To prevent any scratches, please remove all packaging and assemble on a clean, smooth surface.
* Assembly and handling may require two people.
* Estimated assembly time is 45 - 60 minutes.
*Assemble on soft, smooth surface to prevent damage to product finish.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy any such
defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation
of proof of purchase. This is solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has been improperly assembled,
subjected to misuse or abuse or which has been altered or repaired in any way.Any wearing, tearing or fading of the
fabric is not covered under the warranty. This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
Check bolts/screws periodically and tighten them if necessary.
WARNING: Should this product become
damaged, and/or components are broken or missing,
DO NOT USE.
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be used occasionally to
clean the surface. Dry immediately and buff lightly, following the grain. Avoid using harsh cleaners and abrasive
products. Use coasters to prevent the formation of moisture rings and trivets to protect from hot items. Cover
extension leaves (if applicable) with a soft protective fabric before storing. Do not slide objects across the surface -
always lift them. Wipe away spills immediately off the seat fabric to prevent staining. Use a cloth dampened with
water or a professional product to clean the fabric. Always test an inconspicuous area first. Allow upholstery to dry
and brush lightly. Keep away from heat to avoid glazing, melting or scorching.
MAINTENANCE

5-PIECE DINING SET
WM2412RDC
76 PCS
1/4"* 1/2"LG
16 PCS
PHILLIPS COUNTERSINK
HEAD SCREW 4 PCS
1 PC
13
4
HARDWARE LIST
ALLEN KEY
RUBBER PAD
HEX SOCKET
HEAD BOLT
5/32"* 1-1/8"LG
A
PARTS LIST
4 PCS
BC D
4 PCS 4 PCS
E
SEAT CUSHION
F
TUBE BASE
G
TABLE TUBE BASE
I J
TABLE LEGS
TOP FRAME GLASS TOP
LEFT LEG
BACK FRAME RIGHT LEG SEAT FRAME
1 PC 1 PC
4 PCS
4 PCS
2
4 PCS H
4 PCS 1PC

STEP 1
NOTE: Do not fully tighten bolts. Loose bolts will help you to assemble other parts in the
following steps.
5-PIECE DINING SET
WM2412RDC
Attach left leg (B) and right leg (C) to the seat frame (D) with hex socket head bolts (1).
Use Allen key (4) to install bolts (1).
2
5
1
1
1
5-PIECE DINING SET
WM2412-1
SETP1
Attach left leg(B) and right leg(C) to the seat frame(D) with hex socket head bolts(1).Use
Allen key(5) to install bolts.
NOTE:Do not fully tighten bolts. Loose bolts will help you to assemble other parts in the
following steps.
4
1

STEP 2
Attach seat frame (D) to back frame (A) with hex socket head bolts (1).
Use Allen key (4) to install bolts.
NOTE: Do not fully tighten bolts. Loose bolts will help you to assemble other parts in
the following steps.
5-PIECE DINING SET
WM2412RDC
3
A
1
1
5
5-PIECE DINING SET
WM2412-1
SETP2
Attach seat frame(D) to back frame(A)with hex socket head bolts(1). Use Allen key(5) to
install bolts.
NOTE:Do not fully tighten bolts. Loose bolts will help you to assemble other parts in the
following steps.
D
1
4

Attach tube base (E) to back frame (A) and legs (B) & (C) with hex socket head bolts
(1). Use Allen key (4) to install bolts (1).
NOTE: The mounting brackets on tube base (E) have to be positioned in a way that they
follow the angle with the chair legs. This will dictate whether it is upside down or not.
Tighten all bolts previously installed in steps 1, 2 and 3.
5-PIECE DINING SET
WM2412RDC
STEP 3
E
1
1
1
1
4
5
B
C
5-PIECE DINING SET
WM2412-1
SETP3
Attach tube base(E) to back frame(A)and left and right legs(B)&(C)with hex socket head
bolts(1). Use Allen key(5) to install bolts.
NOTE:That the mounting brackets on tube base(E) have to be positioned in a way that they
follow the angle with the chair legs. This will dictate whether it is upside down or not.
Tighten all bolts previously installed in steps 1, 2 and 3.
A
1
4

STEP 4
Place seat cushion (F) upside down on a clean, smooth surface. Attach seat cushion (F)
to seat frame (D) with Phillips countersink head screws (2).
Use a Phillips head screwdriver (not included) to install screws (2).
Repeat step 1 through 4 to assemble remaining chairs.
NOTE: Screws (2) will make their own holes. Do not use power tools to install screws
and do not over tighten the screws.
5-PIECE DINING SET
WM2412RDC
2
5
3
5-PIECE DINING SET
WM2412-1
SETP4
Attach seat cushion(F) to seat frame(D)with Phillips countersink head screws(3).Use Phillips
head screwdriver(not included) to install screws. Repeat steps 1 through 4 to assemble
remaining chairs.
NOTE:Screws(3)will make their own holes,Do not use power tool to install screws and do
not over tighten.
3
3
3
3
F
D
2
2
2
2

STEP 5
Attach table legs (G) to top frame (I) with hex socket head bolts (1).
Use Allen key (4) to install bolts.
NOTE: Do not fully tighten bolts. Loose bolts will help you to assemble other parts in
the following steps.
5-PIECE DINING SET
WM2412RDC
G
I
5
11
1
1
1
4

STEP 6
Attach table tube base (H) to table legs (G) with hex socket head bolts (1).
Use Allen key (4) to install bolts.
NOTE: Tighten all bolts installed in steps 5 & 6.
5-PIECE DINING SET
WM2412RDC
1
G
I
H
1
1
5
4

STEP 7
Place rubber pads (3) onto top frame (I). With the help of another person, gently place
glass top (J) onto table frame. Ensure the glass top is placed in the center of the table
frame.
5-PIECE DINING SET
WM2412RDC
J
3
3
3
3
I

That's it ! You've finished assembling your dining set .
5-PIECE DINING SET
WM2412RDC
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
Product
Maximum
Weight
50 lbs
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
-9-

MODEL #: WM2412RDC
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service Phone Number 1-800-295-1980
Customer Service Representative Mailing Address:
C
B
D
E
A
B
B
B
Email: [email protected]