Dorel DA1008-1 User manual

DA1008-1 (MOCHA)
(TAKEN FROM CARTON)
_____________________________________
Date of purchase:
_______ / _______ / _______
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
6-Drawer Dresser
UPC CODE:
0-65857-17164-8
NOTE:
DOREL ASIA
Model No:
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]om
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

NOTES
* Do not defeat or remove the drawer interlock system.
* Use of tipover restraints may only reduce, but not eliminate, the risk of tipover.
* Never open more than one drawer at a time.
* Ensure all parts and components are present before beginning assembly.
* Assemble on a soft, smooth surface to prevent damage to the product finish.
* Use the wall safety strap provided to secure the unit to the wall.
* A Phillips head screw driver is not included.
* DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly will require two people.
Serious or fatal crushing injuries can occur from furniture tipover. To help prevent
tipover:
* Install tipover restraint provided.
* Place heaviest items in the lower drawers.
* To avoid unnecessary damage, when levelers have been extended, DO NOT drag across
surface when moving. Be sure to lift and carry the item to its location.
* Estimated assembly time: 60 minutes.
* Unless specifically designed to accommodate, do not set TVs or other heavy objects on
top of this product.
* Never allow children to climb or hang on drawers, doors or shelves.
Dorel warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase. This is solely limited to
the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture
can damage wood furniture.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
CUSTOMER SERVICE
WARNING
CARE AND CLEANING
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
CALL 1-800-295-1980
If you have any questions about this product, contact our customer service representative
first!
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
MAINTENANCE
E-MAIL: [email protected]
Canada H1G 3L1
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413

HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11 12
HANDLE
6 PCS
Ø15* 11 mm
LARGE CAM LOCK
18 PCS
Ø7 * 28 mm
SMALL CAM BOLT
24 PCS
6-Drawer Dresser
DA1008-1
Ø1/4" * 35 mm
LARGE BOLT
1 PC
Ø3 * 15 mm
Ø1/4"
Ø8 * 30 mm
Ø6 * 20 mm
Ø7 * 36 mm
Ø13 * 10 mm
LARGE CAM BOLT
18 PCS
SMALL WOOD DOWEL
24 PCS
LARGE WOOD DOWEL
22 PCS
FLAT HEAD SCREW
28 PCS
ROUND HEAD SCREW
16 PCS
SMALL CAM LOCK
24 PCS
Ø4 * 25 mm
ADJUSTABLE LEVELER
3 PCS
ALLEN KEY
1 PC

HARDWARE LIST
13 14
SMALL BOLT
12 PCS
SAFETY STRAP
1 KIT
6-Drawer Dresser
DA1008-1
Ø5/32" * 19mm

PARTS LIST
A B C D
E F G H
I J K L
M N O P
LEFT DRAWER SIDE
6 PCS
LEFT DRAWER
FRONT
3 PCS
RIGHT DRAWER
FRONT
3 PCS
FRONT BOTTOM
RAIL
1 PC
BACK TOP RAIL
1 PC
SUPPORT PANEL
1 PC
6-Drawer Dresser
DA1008-1
MIDDLE PANEL
1 PC
LEFT SIDE FRAME
1 PC
BACK BOTTOM
PANEL
1 PC
RIGHT DRAWER
SIDE
6 PCS
RIGHT SIDE FRAME
1 PC
TOP PANEL
1 PC
DRAWER BOTTOM
6 PCS
DRAWER BACK
6 PCS
BACK PANEL
1 PC
FRONT TOP RAIL
1 PC

STEP 1
6-Drawer Dresser
DA1008-1
Insert large cam bolts (4) into the front rails (E & F), back bottom panel (H), left side frame
(B) and right side frame (C) as shown below.

STEP 2
6-Drawer Dresser
DA1008-1
Insert large cam locks (3) and large wood dowels (1) into the middle panel (D) as shown.
Secure rails (E, F and G) and back bottom panel (H) to the middle panel (D) by rotating
the large cam locks (3) on middle panel (D) 1/2 turn clockwise using a Phillips head
screwdriver (not included).

STEP 3
6-Drawer Dresser
DA1008-1
Insert large wood dowels (1) into the left side frame (B).
Insert large cam locks (3) into the rails (E, F and G) and back bottom panel (H).
Attach left side frame (B) to the assembled unit as shown.
Secure the left side frame (B) to the assembled unit by rotating cam locks (3) on rails (E, F
and G) and back bottom panel (H) 1/2-turn clockwise using a Phillips head screwdriver
(not included).

STEP 4
6-Drawer Dresser
DA1008-1
Insert large wood dowels (1) into the right side frame (C).
Insert large cam locks (3) into the rails (E, F and G) and back bottom panel (H).
Attach right side frame (C) to the assembled unit as shown.
Secure the right side frame (C) to the assembled unit by rotating cam locks (3) on rails (E,
F and G) and back bottom panel (H) 1/2-turn clockwise using a Phillips head screwdriver
(not included).

STEP 5
6-Drawer Dresser
DA1008-1
Insert large wood dowels (1) into the support panel (P). Attach support panel (P) to the
assembled unit as shown.
Secure the support panel (P) to the middle panel (D) with large bolt (9) as shown. Use
Allen key (11) to tighten the bolt.
Install the adjustable levelers (10) into the support panel (P) and side frames (B & C) as
shown.

STEP 6
6-Drawer Dresser
DA1008-1
Insert large cam bolts (4) into the top panel (A).

STEP 7
6-Drawer Dresser
DA1008-1
Insert large wood dowels (1) into the left side frame (B), middle panel (D) and right side
frame (C) as shown.
Insert large cam locks (3) into the side frames (B & C) and middle panel (D).
Place the top panel (A) on the assembled unit.
Rotate large cam locks (3) on the side panels (B & C) and middle panel (D) 1/2-turn
clockwise to secure the top panel (A).
Further secure top panel (A) with flat head screws (7) through rails (E and G) and middle
panel (D). Use a Phillips head screwdriver (not included) to tighten the screws.

STEP 8
6-Drawer Dresser
DA1008-1
Attach back panel (O) to the assembled frame with round head screws (8).
Use a Phillips head screwdriver (not included) to tighten the screws.

STEP 9
6-Drawer Dresser
DA1008-1
Insert small cam bolts (6) and small wood dowels (2) into the front drawer panel (I).
Insert small cam locks (5) into the left drawer side (K) and right drawer side (L).
Attach drawer sides (K & L) to the front drawer panel (I). Secure the drawer sides by
rotating small cam locks (5) 1/2-turn clockwise using a Phillips head screwdriver (not
included).
Slide the drawer bottom (M) into the grooves of drawer sides (K & L) and front drawer
panel (I).

STEP 10
6-Drawer Dresser
DA1008-1
Attach drawer back (N) to the drawer sides (K & L) with flat head screws (7).
Use a Phillips head screwdriver (not included) to tighten the screws.
Attach handle (12) to the front drawer panel (I) with small bolts (13).
Use a Phillips head screwdriver (not included) to tighten the bolts.
Repeat steps 9 and 10 to assemble the remaining drawers using the front drawer panels
(J).

STEP 11
6-Drawer Dresser
DA1008-1
Insert all drawers into the assembled unit.

That's it! You've finished assembling your 6-drawer dresser!
DA1008-1
6-Drawer Dresser
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

Furniture Wall Safety Strap
A B C D
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.
Step 1:
Step 2:
ATTACH A MOUNTING BRACKET (A) SECURELY TO THE BACK EDGE OF THE FURNITURE USING
THE SHORT SCREW (D), THROUGH THE SMALLER HOLE.
PLACE THE FURNITURE INTO POSITION SO BOTH MOUNTING BRACKETS ARE VERTICALLY IN
LINE. LACE THE END OF THE SAFETY WALL STRAP (B) THROUGH THE LARGER HOLE IN EACH
MOUNTING BRACKET (A). BRING BOTH ENDS TOGETHER AND SLIDE THE FLAT END THROUGH
THE LOCKING END AND DRAW IT THROUGH UNTIL ALL SLACK IS REMOVED.
Step 3:
Step 4:
LOCATE THE OTHER MOUNTING BRACKET (A) ON THE WALL OVER A WALL STUD AND 2 INCHES
BELOW THE MOUNTING BRACKET SECURED TO THE BACK OF YOUR UNIT. ATTACH TO THE
WALL STUD USING THE LONG SCREW (C) PROVIDED, THROUGH THE SMALLER HOLE.
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY
REMOVE THE SCREW FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
CONFIRM THAT THE STRAP IS SECURELY LACED AND LOCKED.
MOUNTING BRACKET
4 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE
FURNITURE MAY TIP OVER. PLEASE INSTALL THE SAFETY WALL
STRAP BEHIND THE FURNITURE TO ENSURE SAFETY.
SHORT
SCREW
2 PCS
LONG SCREW
2 PCS
SAFETY WALL STRAP
2 PCS
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
ABAB

MODEL #: DA1008-1
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Email: [e-mail]
Customer Service
Customer Service Representative Mailing Address:
Customer Service Phone Number 1-800-295-1980
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1

ESTE MANUEL DE INSTRUCCIONES
CONTIENE INFORMACIÓN DE
SEGURIDAD IMPORTANTE.
POR FAVOR LÉALO Y CONSÉRVELO
PARA REFERENCIA FUTURA.
_______ / _______ / _______
NOTA
Numero de lote:
(TOMADO DEL CARTON)
_____________________________________
Fecha de compra:
DOREL ASIA
Modelo No:
DA1008-1
(MOCA)
Cómoda de 6
Cajones
CODIGO UPC:
0-65857-17164-8
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
NO DEVUELVA EL PRODUCTO A LA TIENDA.
Si falta una pieza o está dañada, contacte nuestro departamento de
servicio a la clientela. Reemplazaremos la pieza SIN cargo.
Tel #: [phone]
Correo electrónico: [email protected]om
Fax #: [phone]