DOT eCOMPACT User manual

READ THE ENTIRE OWNER’S MANUAL BEFORE USING YOUR DOT BOARD
Owner’s Manual
Transporter model shown here with optional 120 mm wheels and optional four battery configuration

WARNING
THE
USE OF ANY SKATEBOARD PRESENTS RISKS AND DANGERS.
THE
USE
OF THIS PRODUCT HAS INHERENT RISKS AND DANGERS AND
ITS
USE
CAN RESULT IN SERIOUS INJURY OR DEATH EVEN WHEN
SAFETY
EQUIPMENT
IS USED AND OTHER PRECAUTIONS ARE TAKEN.
DO
NOT USE THIS PRODUCT UNTIL YOU READ THE ENTIRE
MANUAL,
WHICH
EXPLAINS HOW TO REDUCE SOME RISKS.

Welcome
4
Congratulations, and thank you for choosing a Transporter, Cruiser or Compact dot board.
Please take the time to read this owner’s manual and familiarize yourself with and understand all the important information
in this manual before riding your new dot board.
We wish you an enjoyable riding experience.
dot board
For the latest updates to this manual, questions, video tutorials and additional help, please visit www.dotboards.com or
you can email us at [e-mail].
Welcome
UPDATES
UPDATES
TO THIS MANUAL, WARNINGS, BATTERY INFORMATION, QUICK START GUIDE, FIRMWARE, AND OTHER INFORMATION WILL BE POSTED
ON
OUR
WEBSITE.SO PLEASE CHECK OUR WEBSITE PERIODICALLY FOR UPDATES.PLEASE REGISTER YOUR DOT BOARD ON OUR WEBSITE SO THAT WE
CAN
EMAIL
YOU UPDATED INFORMATION.PLEASE NOTIFY US OF ANY CHANGES TO YOUR EMAIL AND OTHER CONTACT DETAILS.
NOTE: Illustrations and photographs that appear in this manual are for demonstration purposes only and do not necessarily
reflect the exact parts and accessories or the dot board you purchased. Product specifications are subject to change
without notice.
TM
Keep this manual with your dot board skateboard as a reference. Should you resell your dot board or give it away , please
pass this manual on to the next owner.

Table of Contents
Safety Warning…….……..……………………….………………………………...... 6
Important Labels.....……………….…..……..……..……………………………... 8
Accessories and Modifications…..………………..………………………….…. 9
Model Details –Transporter………..……….…..………………………….…... 10
Model Details –Cruiser……………….………..…..………………………………. 11
Model Details –Compact….…….………………………..…………..……....... 12
Remote Controller –RC100.……………………..……………..….……………. 13
Main Controller –MC100...………………………..…….…….………………… 14
Battery Module –BM100……………………………..…..……………………... 15
Motorized Truck Assembly and Hub Motor…..………………………….. 16
Parts Diagram……………………….…………………………......................... 17
Unpacking Your Skateboard…..………………................................... 18
Battery Safety……………….……..……………………………………............... 19
Battery Care and Installation..………………………………………………….. 20
Removing or Replacing Batteries..…………….…………….……..……..... 22
Charging the Battery.………….………..…..…………….……....…………….... 24
Table of Contents 5
Remote Controller Pairing......…………………..………………..…............ 26
Remote Controller Menu –Main ….…………………………….……..….... 27
Remote Controller Menu –Info ….…………………………….…………..... 28
Remote Controller Menu –Options………..….………………………….... 29
Remote Controller Menu –Ride…..………..….………………………….... 30
Remote Controller Menu Features………………….……………..……..... 31
Remote Controller Ride Levels………….…………….………………..…..... 32
Remote Warning and Haptic (Vibration) Feedback………………...... 33
Setting Up & Before Riding.……………………………………….…….......... 35
Operating Your dot board….…………………………………………….......... 36
Hub Motor and 120mm Wheel Installation….………….….…........... 37
Transporter –120mm Wheel Installation….…………………..……...... 38
Firmware Updates….…………………..………………..…….…………………… 39
Storing Your dot board..….……………………..…………...………………….. 40
Flying With Your dot board.……………………………..…………………….... 41
Warranty and Insurance Information..………………..………………...... 42
Certifications.………………………………………………………..…………………. 43
Regulations……………...………….…………..…………….…………..………..... 45
Product and Battery Disposal Information…………………….…..…….. 46

Safety Warnings
Safety Warnings
6
THE USE OF ANY SKATEBOARD PRESENTS RISKS AND DANGERS. THE USE OF THIS PRODUCT HAS INHERENT RISKS AND DANGERS AND ITS USE CAN RESULT IN
SERIOUS INJURY OR DEATH EVEN WHEN SAFETY EQUIPMENT IS USED AND OTHER PRECAUTIONS ARE TAKEN.
WARNING
READ AND UNDERSTAND THE ENTIRE OWNER’S MANUAL PRIOR TO USE*
WARNING
THIS PRODUCT INCLUDES ONE OR MORE RECHARGEABLE BATTERIES WHICH POWERS ONE OR MORE ELECTRIC MOTORS. MISUSE OF THE BATTERY CAN RESULT
IN SERIOUS INJURY, DEATH, FIRE OR OTHER DAMAGE. READ AND FOLLOW THE SEPARATE WARNINGS AND INSTRUCTIONS REGARDING THE BATTERY.
USE THIS PRODUCT AT YOUR OWN RISK
YOUR SAFETY IS UP TO YOU. Before using your dot board, please read and understand the entire instruction manual, which contains further warnings and information
WARNING
Depending upon the age, skill level and maturity of the user, the dot
board may not be suitable for everyone. This product is not
recommended for riders under the age of 18. The use of this product by
someone who lacks the necessary physical development, skills or
maturity presents an increased risk of serious injury or death. This
product is NOT a toy. NEVER leave this product with unattended children.
WARNING
Under some circumstances, the electric brakes may not work, especially
if the battery is fully charged due to the regenerative braking feature. It
is also possible to lose power and brakes due to radio interference or a
dead Remote control battery. Therefore, only ride this product at speeds,
on slopes, and in situations where you would be comfortable riding the
product without power or brakes.
WARNING
Not wearing a helmet increases the chances of serious injury or death. Be
sure you always wear a helmet and other protective gear when you ride.
WARNING
Once the skateboard starts moving, the Remote control will continue to
respond to the skateboard even if you are not on the skateboard. If you
step off, fall off the skateboard, or are not on the skateboard while the
skateboard is moving, the skateboard will continue to move even if you
are not on it. Therefore, it is important that you use the Remote only
while you are on the skateboard or while the skateboard is in the upside
down position. In the event of a runaway skateboard, attempt to use the
brakes on the Remote to stop the skateboard but be aware that it is
possible that the brakes may not always work.

Safety Warnings
YOU INCREASE THE RISKS IF YOU:
•Fail to wear a helmet
•Ride at speeds, on inclines, or in situations where you are not safely in control
•Attempt tricks or stunts
•Ride at night, in low visibility, in wet or icy conditions, in bad weather such as rain
or fog, or in other risky environments
•Ride if you are impaired (physically or mentally)
•Ride if you are pregnant, have any heart, head, back or neck conditions
YOU MAY DECREASE THE RISKS IF YOU:
•Wear a helmet –ALWAYS WEAR A HELMET TO REDUCE THE RISK OF HEAD
INJURIES
•Wear other protective gear and clothing
•Ride within your capabilities and use common sense and good judgment
•Pay attention to your surroundings and watch for cars, pedestrians, bikes,
other vehicles and other hazards
•Ride on flat, dry, level ground that is clear of debris
Safety Warnings 7
*WARNINGS AND INSTRUCTIONS MAY CHANGE OVER TIME.
FOR THE MOST UPDATED OWNER’S MANUAL PLEASE VISIT www.dotboards.com AND CLICK ON THE SAFETY/MANUAL LINK.
Check laws and regulations that govern the use of the product on public roads, bike paths, sidewalks and other places that you plan to use this product.
You are responsible for knowing and abiding with all applicable laws and regulations
WARNING
While your dot board is equipped with red rear lights, they are not brake
lights and may not always be visible. If you ride in low visibility conditions,
use equipment and clothing that makes you visible to others and that
allows you to see where you are going.
WARNING
Do not disassemble or tamper with or attempt to repair the hub motor(s),
or the Main
Controller Module or battery, or the Remote Control. They
contain chemicals or components that may cause injury.
WARNING
This product is not for riders heavier than 265 pounds (120 kilograms). DO
NOT EXCEED THE WEIGHT LIMIT OF 265 POUNDS (120 KILOGRAMS)
–
including backpacks and other items that the rider might be carrying. This
product is intended to be a single rider use only. DO NOT ride with any
additional passengers. Doing so may exceed the capacity of the product
and result in a loss of control or reduced braking or insufficient power.
WARNING
Do not touch the rear truck or motor after extended use as they may get
hot and may cause burns.
YOUR SAFETY IS UP TO YOU. It is not possible to list all do’s and don’ts. We list only some ways that may help reduce the risk of injury or death

Important Labels
Main Controller Label -MC100
SAFETY LABELS
Safety labels on your skateboard either warn you of potential hazards
that could cause serious injury or provide important safety
information. Read these labels carefully and don’t remove them.
Note: If a label comes off or becomes hard to read, contact us at
[e-mail]
Battery Module Label –BM100
Important Labels
8
When applicable, the battery module label is attached to the
top cover of the battery module case. This faces the
underside of skateboard deck and not visible unless the
battery module is removed or upon first assembly and use.
Remote Label -RC100
Warning Label –On underside of the skateboard deck

Accessories and Modifications
Modifications
Do not remove any original equipment or improperly modify
your dot board in any way that would change its design or
operation. Such changes could seriously impair your
skateboard’s handling, stability, and braking, making it unsafe
to ride.
Risk of Electric Shock
Do not open or tamper with the electrical or electronic
housings, including battery electronics and cells and main
controller module. This is dangerous and can lead to fire or
explosion or malfunctions. Tampering will also void your
warranty.
ACCESSORIES AND MODIFICATIONS
Improperly modifying your dot board or using uncertified accessories can
make your dot board unsafe.
Accessories
•Only use dot board accessories and parts that have been specifically
designed and tested for your dot board. You will be solely personally
responsible for any damage that may result from your use of any
uncertified accessories or improper modifications of your dot board.
•Do not add any electrical equipment to the dot board electrical system. A
blown fuse can cause a loss of lights or motor power. Any interference to
the electrical system can result in erratic behavior of the main controller
module.
•Do not modify, open, or tamper with the battery module. Do not tamper
with the cells contained within the battery module, these have been
specifically designed, programmed and tested to use with your dot
board.
Accessories and Modifications 9
WARNING
USE OF IMPROPER
ACCESSORIES OR IMPROPER MODIFICATIONS
CAN
CAUSE DAMAGE TO YOUR DOT BOARD WHICH CAN LEAD TO
SERIOUS INJURY OR DEATH.
FOLLOW ALL INSTRUCTIONS IN THIS OWNER’S MANUAL REGARDING
ACCESSORIES AND MODIFICATIONS
.
WARNING
DO NOT use
uncertified batteries, chargers or other parts
with your dot
board. Only use genuine dot board batteries,
chargers, and parts. The use of
uncertified batteries,
chargers or parts with your dot board may pose a fire hazard
and other hazards
which can result in serious injury or
death.

Model Details - Transporter
Model Details - Transporter
10
TRANSPORTER
The Transporter comes standard with two motors and two batteries - you have the
option to upgrade to three or four batteries and larger 120mm comfort wheels.
•Approximate Range:
Two Batteries 12 Miles/20 Km
Three Batteries 18 Miles/30 Km
Four Batteries 24 Miles/40 Km
•Approximate Max Speed:
83mm Wheels: 18 MPH/30 KPH
120mm Wheels: 24 MPH/40 KPH
•Approximate Hill Climb: up to 30% grade
•Approximate Product Weight:
Two Batteries + Two Motors: 16 lbs/ 7 kgs
Three Batteries + Two Motors: 18 lbs/ 8 kgs
Four Batteries + Two Motors: 20 lbs/ 9 kgs
•Dimensions: 11 inches/28 cm (wide), 42 inches/107 cm (length), 5 1/2 inches/ 14 cm
(height)
•Brakes: regenerative braking delivered by the dot Hub Motor
•Deck: 8-ply teak + hard rock maple, eco-resin construction
•Wheels: 83mm 78a or 120mm 78a urethane
•Front Truck: 150mm magnesium reverse kingpin
•Charger: 3.5A 48V DC power adaptor with magnetic cable (standard)
•Approximate Charge Time:
Two Batteries with Standard 3.5A 48V Adaptor - 90 Minutes
Three Battery with Standard 3.5A 48V Adaptor - 135 Minutes
Four Battery with Standard 3.5A 48V Adaptor - 180 Minutes