Draytek Vigor2760 Delight User manual

www.draytek.net.nz
www.snappernet.co.nz
Vigor2760 Delight » Quick Start Guide
Configure your computer’s network
Connect your computer to the Vigor2760 with an Ethernet cable (supplied). Ensure your computer is obtaining an IP
address automatically.
Connect to the Web Interface
Open your Web Browser (e.g. Internet Explorer, Google Chrome or Mozilla Firefox), enter http://192.168.1.1/ into
the address bar, and press the Enter key on your keyboard.
You should be asked for a username and password. Enter admin into both fields (the password may show as dots or
stars) and click the Login button.
Run the Quick Start Wizard
On the left-hand navigation menu, click Wizards and then Quick Start Wizard.
Choose a new login password - you will use this to log into the Web Interface in
future. Enter the current password (admin) into the Old Password field. Enter your
new password into the New and Confirm Password fields and click Next >
Note: The passwords may show as dots or stars
In the WAN Interface section you can leave all settings as default unless you are connecting to VDSL on a Chorus
line in which case you must enable VLAN Tag insertion and set the Tag value to 10, then click Next >

Set the protocol to PPPoE / PPPoA.
For ADSL only, set Encapsulation to PPPoA VC MUX, VPI to 0, VCI to 100.
Click Next >
Enter the username and password provided to you by your Internet Service Provider. Username should be in the
form of an email address. The password will need to be entered into both the Password and Confirm Password
fields. Note : All fields are case sensitive. Click Next >
Confirm your settings and click Finish. The router will restart.
Check your connection by logging back in to the router as above with your newly assigned password. Click Online
Status then Physical connection. Check the WAN 1 Status section to be sure you have an IP and GW IP assigned.
Need help?
We’re available 9:00am to 5:00pm, Monday to Friday.
Phone: [phone]
Email: [email protected]z
Firmware updates are available free of charge from www.draytek.net.nz