Draytek Vigor 2132 Series User manual

Vigor2132 Series Quick Start Guide
i

Vigor2132 Series Quick Start Guide ii

Vigor2132 Series Quick Start Guide
i
Vigor2132 Series
Security Giga Router
Quick Start Guide
Version: 1.1
Firmware Version: V3.7.8_RC1
(For future update, please visit DrayTek web site)
Date: March 12, 2015

Vigor2132 Series Quick Start Guide ii
Intellectual Property Rights (IPR) Information
Copyrights
© All rights reserved. This publication contains information that is protected by
copyright. No part may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language without written permission from
the copyright holders.
Trademarks
The following trademarks are used in this document:
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 95, 98, Me, NT, 2000, XP, 7, 8 and Explorer are
trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Computer Inc.
Other products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety Instructions
Read the installation guide thoroughly before you set up the router.
The router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the router
yourself.
Do not place the router in a damp or humid place, e.g. a bathroom.
Do not stack the routers.
The router should be used in a sheltered area, within a temperature range
of +5 to +40 Celsius.
Do not expose the router to direct sunlight or other heat sources. The
housing and electronic components may be damaged by direct sunlight or
heat sources.
Do not deploy the cable for LAN connection outdoor to prevent electronic
shock hazards.
Keep the package out of reach of children.
When you want to dispose of the router, please follow local regulations on
conservation of the environment.
W
arrant
y
We warrant to the original end user (purchaser) that the router will be free from
any defects in workmanship or materials for a period of two (2) years from the
date of purchase from the dealer. Please keep your purchase receipt in a safe
place as it serves as proof of date of purchase. During the warranty period, and
upon proof of purchase, should the product have indications of failure due to
faulty workmanship and/or materials, we will, at our discretion, repair or replace
the defective products or components, without charge for either parts or labor, to
whatever extent we deem necessary tore-store the product to proper operating
condition. Any replacement will consist of a new or re-manufactured
functionally equivalent product of equal value, and will be offered solely at our
discretion. This warranty will not apply if the product is modified, misused,
tampered with, damaged by an act of God, or subjected to abnormal working
conditions. The warranty does not cover the bundled or licensed software of
other vendors. Defects which do not significantly affect the usability of the
product will not be covered by the warranty. We reserve the right to revise the
manual and online documentation and to make changes from time to time in the
contents hereof without obligation to notify any person of such revision or
changes.
Be a Registered
Owne
r
Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
Firmware & Tools
Updates Due to the continuous evolution of DrayTek technology, all routers will be
regularly upgraded. Please consult the DrayTek web site for more information on
newest firmware, tools and documents.
http://www.draytek.com

Vigor2132 Series Quick Start Guide
iii
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, Hukou Township, Hsinchu Industrial Park, Hsinchu County,
Taiwan 303
Product: Vigor2132 Series Router
DrayTek Corp. declares that Vigor2132FVn is in compliance with the following essential requirements
and other relevant provisions of R&TTE 1999/5/EC, ErP 2009/125/EC and RoHS 2011/65/EU.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive
2004/108/EC by complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying
with the requirements set forth in EN60950-1.
This product is designed for 2.4GHz /5GHz WLAN network throughout the EC region.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired
operation.
The antenna/transmitter should be kept at least 20 cm away from human body.
Please visit http://www.draytek.com for more detailed information.

Vigor2132 Series Quick Start Guide iv

Vigor2132 Series Quick Start Guide
v
T
Ta ab bl le e o of f C Co on nt te en nt ts s
1. Introduction ........................................................................................1
1.1 Panel Explanation.................................................................................... 3
1.1.1 Vigor2132FVn........................................................................................... 3
1.1.2 Vigor2132ac/Vac....................................................................................... 5
1.2 Package Content........................................................................................ 8
2. Installing Your Router........................................................................9
2.1 Hardware Installation................................................................................. 9
2.2 Printer Installation.................................................................................... 10
3. Basic Settings...................................................................................19
3.1 Accessing Web Page............................................................................... 19
3.2 Quick Start Wizard ................................................................................... 20
3.3 Wireless Configuration............................................................................ 29
3.3.1 Basic Wireless LAN Concept .................................................................. 29
3.3.2 Wireless Wizard...................................................................................... 30
3.4 Registering Vigor Router......................................................................... 32
4. Trouble Shooting..............................................................................35
4.1 Checking If the Hardware Status Is OK or Not....................................... 35
4.2 Checking If the Network Connection Settings on Your Computer Is OK
or Not............................................................................................................... 36
4.3 Pinging the Router from Your Computer ............................................... 40
4.4 Checking If the ISP Settings are OK or Not ........................................... 41
4.5 Backing to Factory Default Setting If Necessary................................... 42
4.6 Contacting DrayTek ................................................................................. 43

Vigor2132 Series Quick Start Guide vi

Vigor2132 Series Quick Start Guide
1
1
1. . I In nt tr ro od du uc ct ti io on n
Vigor2132 Series integrates IP layer QoS, NAT session/bandwidth
management to help users control works well with large bandwidth.
The entertainment applications running over the home network infrastructure
and home-based productivity for SOHO are growing while the broadband
bandwidth is increasingly available within affordable budget along with
deployment of FTTx. The fiber WAN port of Vigor2132FVn optimizes the
throughput performance and flexibility for time-critical console gaming,
multi-media streaming and P2P downloading as well as IP telephony. The
four Gigabit Ethernet (10/100/1000 LAN ports) auto-sensing ports facilitate
home networking with width-intensive applications! Through the
combination of Fiber WAN and Gigabit LAN ports to optimize the
bandwidth usage, the downstream data and voice packets for Triple play can
be flawlessly displayed in endpoint devices, such as HDTV, desktop/laptop
or analog/IP phone.

Vigor2132 Series Quick Start Guide 2
The Vigor2132FVn/Vac/ac series router gives you not only the 802.11n/ac
standards for coverage, but also the time scheduling function to save your
energy bill plus reducing the carbon footprint. For wireless security, it is also
efficient for wireless network management. For instance, its "Wireless LAN
isolation" can easily isolate wireless network for friends or guests. Then, the
access rights of various wireless clients can be managed by “MAC address
control" and deployed "WEP/WPA/WPA2" authentication. No need to
remember passwords, you simply press "WPS" button on router and then
enable users to securely connect laptop or computers to the router!
The fiber deployment (for Vigor2132FVn) lets businesses and common
people have fatter pipe of accessing global network. DrayTek
Vigor2132FVn Fiber Router is developed in compliance with the Super-fast
broadband architecture and customized for users which already have Fiber to
the building (FTTB) or Fiber to the home (FTTH). The bandwidth-consumed
multimedia streaming and crystal-clear VoIP functionalities are realized
through the Vigor2132FVn's upto-1000Mpbs (1 Gigabit) WAN throughput
and advanced bandwidth management. You can apply the rules of Session
Limit, Bandwidth Limit, Port Rate Control, QoS control list, Ports Priority to
different traffic type for better efficiency.
By making the most of your broadband line, the VoIP call will be carried to
the destination via Internet. So you can save on the telephone bill.
Combining the Internet Telephony service from the Internet Telephony
Service Provider (ITSP), the Vigor2132FVn charter VoIP calls to be made to
any legacy phone numbers, even including mobile and long distance
numbers!
In addition, it supports the worldwide standard TR-069 management and
customized triple play while most fiber routers could not have the above
distinguished features.

Vigor2132 Series Quick Start Guide
3
1
1. .1 1 P Pa an ne el l E Ex xp pl la an na at ti io on n
1
1. .1 1. .1 1 V Vi ig go or r2 21 13 32 2F FV Vn n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT (Activity)
Off The router is powered off.
On USB device is connected and ready for use.USB1/USB2 Blinking The data is transmitting.
On Internet connection is ready.
Off Internet connection is not ready.
WAN
Blinking The data is transmitting.
On Wireless access point is ready. WLAN Blinking It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
On The VPN tunnel is active.
Off VPN services are disabled
VPN
Blinking Traffic is passing through VPN tunnel.
On SFP Module is plugged and fiber link is up.
Fiber Off SFP Module is unplugged or the fiber link is
down.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Phone1/
Phone2 Blinking A phone call comes.
LED on Connector
On The port is connected.
Off The port is disconnected.
Left
LED Blinking The data is transmitting.
On The port is connected with 1000Mbps.
LAN1~
LAN4
Right
LED Off The port is connected with 10/100Mbps

Vigor2132 Series Quick Start Guide 4
Interface Description
Wireless LAN
ON/OFF/WPS Press the button and release it within 2 seconds. When the wireless function is ready, the green LED
will be on.
Press the button and release it within 2 seconds to
turn off the WLAN function. When the wireless
function is not ready, the LED will be off.
When WPS function is enabled by web user
interface, press this button for more than 2 seconds to
wait for client’s device making
network connection
through WPS.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
USB1~USB2 Connecter for a USB device.
WAN Fiber connection (100/1000Mbps) for accessing the
Internet.
LAN1~LAN4 Connecters for local network devices.
Phone1~ Phone2 Connecter for analog phone(s).
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Vigor2132 Series Quick Start Guide
5
1
1. .1 1. .2 2 V Vi ig go or r2 21 13 32 2a ac c/ /V Va ac c
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT (Activity)
Off The router is powered off.
On USB device is connected and ready for use.USB1~USB2 Blinking The data is transmitting.
On Internet connection is ready.
Off Internet connection is not ready.
WAN
Blinking The data is transmitting.
On Wireless access point with bandwidth of
2.4GHz/5GHz is ready.
2.4G/5G
Blinking It will blink slowly while wireless traffic
goes through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
CSM On The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web
Content Filter application can be enabled
from Firewall >>General Setup. (Such
profile must be established under CSM
menu).
On The DoS function is active.DoS Blinking It will blink while detecting an attack.
QoS On The QoS function is active.
On The phone connected to this port is
off-hook.
Phone1 ~
Phone2 Off The phone connected to this port is

Vigor2132 Series Quick Start Guide 6
on-hook.
Blinking A phone call comes.
LED on Connector
On The port is connected.
Off The port is disconnected.
Left
LED Blinking The data is transmitting.
On The port is connected with 1000Mbps.
WAN
Right
LED Off The port is connected with 10/100Mbps
On The port is connected.
Off The port is disconnected.
Left
LED Blinking The data is transmitting.
On The port is connected with 1000Mbps.
LAN1~
LAN4
Right
LED Off The port is connected with 10/100Mbps

Vigor2132 Series Quick Start Guide
7
Interface Description
Wireless LAN
ON/OFF/WPS Press the button and release it within 2 seconds. When the wireless function is ready, the green LED
will be on.
Press the button and release it within 2 seconds to
turn off the WLAN function. When the wireless
function is not ready, the LED will be off.
When WPS function is enabled by web user
interface, press this button for more than 2 seconds
to wait for client’s device making
network
connection through WPS.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual,
release the button. Then the router will restart with
the factory default configuration.
USB1~USB2 Connecter for a USB device.
WAN Connecter for local network devices or modem for
accessing Internet.
LAN1~LAN4 Connecters for local network devices.
Phone1~ Phone2 Connecter for analog phone(s).
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Vigor2132 Series Quick Start Guide 8
1
1. .2 2 P Pa ac ck ka ag ge e C Co on nt te en nt t
Quick Start Guide CD
or
RJ-45 Cable (Ethernet) Antenna x 2(n model)
Antenna x 3(ac model)
The type of the power adapter depends on the country that the router will
be installed:
UK-type Power Adapter
EU-type Power Adapter
USA/Taiwan-type Power
Adapter AU/NZ-type Power Adapter
* The maximum power consumption is 24 Watt.

Vigor2132 Series Quick Start Guide
9
2
2. . I In ns st ta al ll li in ng g Y Yo ou ur r R Ro ou ut te er r
This section will guide you to install the router through hardware connection
and configure the router’s settings through web browser.
2
2. .1 1 H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
Before starting to configure the router, you have to connect your devices
correctly.
1. Connect the cable Modem/DSL Modem/Media Converter to any WAN
port of router with Ethernet cable (RJ-45).
2. Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports
of the router and the other end of the cable (RJ-45) into the Ethernet port
on your computer.
3. Connect one end of the power adapter to the router’s power port on the
rear panel, and the other side into a wall outlet.
4. Power on the device by pressing down the power switch on the rear
panel.
5. The system starts to initiate. After completing the system test, the ACT
LED will light up and start blinking.
(For the detailed information of LED status, please refer to section 1.1.)

Vigor2132 Series Quick Start Guide 10
2
2. .2 2 P Pr ri in nt te er r I In ns st ta al ll la at ti io on n
You can install a printer onto the router for sharing printing. All the PCs
connected this router can print documents via the router. The example
provided here is made based on Windows 7. For other Windows system,
please visit www.DrayTek.com.
Before using it, please follow the steps below to configure settings for
connected computers (or wireless clients).
1. Connect the printer with the router through USB/parallel port.
2. Open All Programs>>Getting Started>>Devices and Printers.

Vigor2132 Series Quick Start Guide
11
3. Click Add a printer.
4. A dialog will appear. Click Add a local printer and click Next.
5. In this dialog, choose Create a new port. In the field of Type of port,
use the drop down list to select Standard TCP/IP Port. Then, click
Next.

Vigor2132 Series Quick Start Guide 12
6. In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field
of Hostname or IP Address and type 192.168.1.1 as the Port name.
Then, click Next.
7. Click Standard and choose Generic Network Card.