Draytek VigorSwitch P1282 User manual

Firmware version: V2.1.0_RC
VigorSwitch P1282 / G1282
Smart Web Gigabit Switch
Version: 1.2
(For future updates, please visit the DrayTek website)
Date: September 04, 2017
they
Quick Start Guide

Microsoft is a registered trademark of Microsoft Corp.
,
Information on intellectual property rights (IPR)
Warranty
When you want to dispose of the switch, please follow the local regulations for
environmental conservation.
Windows, Windows 95, 98, Me, NT, 2000, XP, Vista, 7, 8, and Explorer are
trademarks of Microsoft Corp.
We warrant to the original end user (purchaser) that the switch will be free from
defects in workmanship or materials for a period of one (1) year from the date of
purchase from the dealer. Keep your sales receipt in a safe place, as it serves as
proof of the date of purchase. During the warranty period, and upon proof of
purchase, if the product shows signs of failure due to faulty workmanship and/or
materials, we will, at our option, repair or replace the defective products or
components, free of charge for parts or labor. working. As we deem necessary,
store the product in proper operating conditions. Any replacement will be a
functionally equivalent new or remanufactured product of equal value, and will be
offered solely at our discretion. This warranty will not apply if the product is
modified, misused, tampered with, damaged by an act of God, or subjected to
abnormal working conditions. Software included or licensed from other vendors is
not covered by the warranty. Defects that do not significantly affect the usability of
the product will not be covered by the warranty. We reserve the right to revise the
manual and online documentation and to make changes from time to time to the
content thereof without obligation to notify any person of such revision or changes.
on the
-
-
-
Safety instructions and approval
-
-
-
-
-
iii
-
-
-
-
-
Apple and Mac OS are registered trademarks of Apple Inc. Other products
may be trademarks or registered trademarks of their respective manufacturers.
© All rights reserved. This publication contains information that is protected by copyright.
No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language without the written permission of the copyright holders.
The following trademarks are used in this document:
Keep the package out of the reach of children.
Do not place the switch in a damp or humid place, for example, a bathroom.
Please read the installation guide carefully before configuring the switch.
The switch is a complicated electronic unit that can only be repaired by
authorized and qualified personnel. Do not try to open or repair the switch yourself.
Instructions
Do not stack switches.
The switch must be used in a protected area, within a temperature
range of +5 to +40 Celsius.
Do not expose the switch to direct sunlight or other sources of heat. The casing
and electronic components can be damaged by direct sunlight or heat sources.
Do not run the cable for LAN connection outdoors to avoid risk of
electric shock.
Copyright
trademarks
Security

DrayTek Corporation.
300, Taiwan, ROC
Version / Issue Date
EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU with reference to
the following standards
2014 A-Class
2013
EU Declaration of Conformity
Standard
Product name:
(date)
Model Number:
IN 55032
IN 55024 2006 +A11:2009
EN 61000-3-2
IN 60950-1
Calvin Ma / President.
(Legal Firm)
2015 class A
A2: 2013
(place)
EN 61000-3-3 2010+A1:2015
is in conformity with the relevant Union harmonization legislation:
We DrayTek Corp., Office at No.26, Fu Shing Road, HuKou County, Hsin-Chu Industry Park, Hsinchu 300,
Taiwan, ROC, declare under our sole responsibility that the product
June 22, 2017
-
-
-
-
Gigabit VigorSwitch P1282
Hsinchu
No.26, Fu Shing Road, HuKou County, Hsin-Chu Industrial Park, Hsinchu
Smart PoE Web Switch
+ A1:2010 +A12:2011+
IV
Talk to:
Manufacturer:

DrayTek Corporation.
300, Taiwan, ROC
Version / Issue Date
EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU with reference to
the following standards
EU Declaration of Conformity
Standard
2014 A-Class
2013
+ A1:2010 +A12:2011+
No.26, Fu Shing Road, HuKou County, Hsin-Chu Industrial Park, Hsinchu
in
Hsinchu
Product name:
IN 55032
IN 55024 2006 +A11:2009
EN 61000-3-2
IN 60950-1
Calvin Ma / President.
(Legal Firm)
2015 class A
A2: 2013
(place)
EN 61000-3-3 2010+A1:2015
We DrayTek Corp., Office at No.26, Fu Shing Road, HuKou County, Hsin-Chu Industry Park, Hsinchu 300,
Taiwan, ROC, declare under our sole responsibility that the product
June 22, 2017
is in conformity with the relevant Union harmonization legislation:
-
-
-
-
24 gigabit switch
Model Number:
(date)
puertos VigorSwitch G1282
Manufacturer:
Talk to:

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Reorient or relocate the receiving antenna.
-
Regulatory information
in
-
-
-
Consult the dealer or an experienced radio/TV technician for help.
(2) This device may accept any interference received, including interference that may cause undesired
operation.
Federal Communications Commission Interference Statement
More updates, please visit www.draytek.com .
(1) This device may not cause harmful interference, and
Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. The operation is subject to the following two
conditions:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:

we
Be a registered owner
Due to the continuous evolution of DrayTek technology, all switches will be updated regularly.
Check the DrayTek website for more information on the latest firmware, tools and documents. http://
www.draytek.com
Firmware and tool updates
Web registration is preferred. You can register your Vigor switch via http://www.draytek.com.

Quick Start Guide
1
If any of these items are missing or damaged, please contact your local dealer for a replacement.
Package content
US/Taiwan type power cord
Rack mounting kit (brackets)
AU/NZ type power cord
The type of power cord depends on the country in which the switch
will be installed.
The Web Smart 24-Port + 4-Port UTP/SFP Combo Gigabit Port Switch is a standard switch
that complies with IEEE 802.3u/ab Fast Ethernet and Gigabit Ethernet specifications.
EU type power cord
Vigor Switch P1282 (con PoE) VigorSwitch G1282 (sin PoE)
The network administrator can log in to the switch to monitor, configure, and control the
activity of each port. In addition, the switch implements QoS (Quality of Service) and VLAN.
It is suitable for office applications.
UK type power cord

Combined
Puerto
The device is turned on and working
normally.
Puerto 1 ~ 24
The port is supplied with PoE power.
Flicker
Flicker
The switch turns on and system boot begins.
Dashboard Explanation
PoE/max.
The device is connected with 10/100Mbps.
2
The device is connected with 1000Mbps.
The device is connected with 10/100Mbps.
The device is not ready or has failed.
The device is connected with 1000Mbps.
SFP
(Amber)
Combo to Oporto
25 ~ 28
(Amber)
Explanation
The port is down or the link fails.
Power is off or system is not ready/not working
properly.
No PoE power is supplied to the port.
PoE for Port 1 to Port 24
Puerto 1 a Puerto 24
Off
Off
Off
About
About
Off
Off
SYSTEM
LED
can
(RJ 45
(Green)
RJ 45 LNK/ACT
(for P1282)
RJ45 LNK/ACT
LNK/ACT
The switch finishes booting the system and the
system is ready.
The system is sending or receiving data
through the port.
state
Connected within the maximum PoE power
budget.
PoE 1~24
on (green)
on (green) Connected via PoE maximum power budget.
on (green)
on (green)
on (green)
on (green)

(Amber)
The port is down or the link fails.
Use
SFP LNK/ACT
The port is down or the link fails.
PoE for port 1~24
LNK/ACT)
- 340 watts (max)
Interface
The device is connected with 10/100Mbps.
Puerto SFP LNK/ACT 25 ~ 28
3
The device is connected with 1000Mbps.
Off
About
Off
Power input for AC input (100~240V/AC,
50/60 Hz).
PoE Power Budget –-
Flicker
Flicker
-
-
on (green)
through the port.
VigorSwitch P1282 --
The following limitation is suitable for the output power
The system is sending or receiving data to
The system is sending or receiving data
through the port.
Ports 25-28 are used for the fiber
connection.
RJ 45 LNK/ACT Port 1~24
IEEE 802.3at Max. 30W output supported
IEEE 802.3af Max. 15.4 W output supported
Port 1 to port 24 can be used for Ethernet
connection and PoE connection, depending
on the connected device.
Description

Use
(Take VigorSwitch P1282 as an example)
Other PCs, servers, and network devices can be connected to the
switch using a standard "straight" twisted pair cable.
hardware installation
Power the device to this switch and get a 48V power supply through
Cat. Cable 5e.
3.1 Network connection
4
switch.
This section will guide you to install the switch through a hardware connection and configure
the switch settings through the web browser.
- Use a cat. 5e twisted pair cable to connect a PoE device to port (1~24) of this
-
-
-
Before you start configuring the switch, you need to connect your
devices correctly.
Please note that the power device must comply with IEEE 802.3af/at.
The switch will supply power to the PoE device through the twisted pair cable. have

2. After the bracket installation, the VigorSwitch chassis can be installed in a rack
using four screws for each side of the rack.
3.2 Wall-mounted installation
1. Attach the brackets to the chassis of a 19-inch or 23-inch rack. The second
bracket holds the other side of the chassis as per the procedure above.
5
The switch can be easily installed using a rack mount kit.

Username
software configuration
IP adress
2. After setting the correct IP address on your PC, open your web browser and access
the IP address of the switch.
192.168.1.224
255.255.255.0
administration
administration
Before using the switch, perform the following steps:
In this section, we take VigorSwitch P1282 as an example:
1. Set up a physical path between the configured switch and a PC using
qualified Cat UTP. 5e cable with RJ-45 connector.
Enabled (activated)
Subnet mask
If a PC connects directly to the switch, you must set the same subnet mask for the PC and the
switch. The managed switch defaults are listed below:
Password
DHCP client
6

GNU GENERAL PUBLIC LICENSE:
https://gnu.org/licenses/gpl-2.0 Version
2, June 1991
GPL Notice
VigorSwitch home page will be displayed as below:
To download source codes, visit:
http://gplsource.draytek.com
If the switch does not work properly after many tries, please contact your dealer for
further assistance immediately. If you have any questions, feel free to email
[email protected].
This DrayTek product uses software licensed in whole or in part under
the terms of the GNU GENERAL PUBLIC LICENSE. The author of the
software does not provide any warranty. A limited warranty is offered
on DrayTek products. This Limited Warranty does not cover any
application or software program.
If you have any questions, please feel free to contact DrayTek technical support at
[email protected] for more information.
7
Customer service