Dream On Me 645 User manual

1MADE IN CHINA
DREAM ON ME INC.
125 HELEN STREET
S.PLAINFIELD NJ 07080
732-748-1300
ASSEMBLY INSTRUCTIONS
ITEM NO: 645
Adult assembly required
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Plesae read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw drive
Flat head screw drive
Hammer
DO NOT use power drills or drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. DO NOT use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.

2
.Read all instructions before assembling cradle.KEEP INSTRUCTIONS FOR FUTURE
USE.
Periodically check the safety of your cradle, by making certain all scerws,nuts and bolts
are tightened securely and insepect cradle for damaged hardware, loose joints,missing
parts or sharp edges. DO NOT use the cradle if any parts are missing or broken. Ask your
local dealer for replacement part and instruction literature if needed. DO NOT substitute
parts.
When child is able to climb out unaided, the cradle should no longer be used.
DO NOT suspend items with long strings into cradle. DO NOT place cradle near a window
where cords from blinds or drapes may strangle a child. DO NOT tie pacifiers, necklaces,
or any other item around a chlid’s neck or on the cradle parts. This could cause
strangulation.
DO NOT use a water mattress with this cradle.
DO NOT use shipping or other bags as mattress covers since they can cause suffocation.
Never aim or point a vaporizer or humidifier directly at the cradle as the water vapour
could ruin the finish of it.
Wash with mild soap and a damp cloth. Do not use abrasives. Avoid furniture polish as it
could be hazardous to your child. If refinishing, use a non-toxic finish specific for children’s
products.
.Failure to follow these warnings and the assembly instructions could result in serious injury
or death.
WARNING
.
.
.
.
.
.
.

3
PARTS LIST FOR #645
A: Head board (2PCS) B: Rail (2PCS)
a: Assembly bolt 5/8’ (8 pcs) c: Allen key(1 pc)
e: Metal shelf brace(1 pc) f: Cradle lock (2 pcs)
b:
Shelf brace screw 3/5’ (2 pcs)
C: Panel MDF (1PC)
d: Cradle lock screw (2 pcs)
HARDWARE AND TOOLS DIAGRAM
g:Plastic washers (2 pcs)
D:Mattress (1PC)

Connect rail (B) to one of the
headboard (A) by bolts (a)
DO NOT FULLY TIGHTEN
STEP 1
Insent the bottom shelf (C) to the gap of the
headboard(A) and rails (B).
STEP 2
ALL THE BOLTS.
a
c
a
B
B
A
B
B
A
C
a
c
a
a
4

5
STEP 3
STEP4
Connect the metal shelf brace (e) to the bottom bar of
rails (B) with bolts (b).
TIGHTEN
ALL BOLTS.
Connect another headboard (A) to the rail (B)
by bolts (a)
.
a
a
B
e
b
b
a
b
BA
B
a

6
STEP 6
Connect the cradle lock (f) to the headboard (A) with the bolts (d) and plastic
washers (g).
f
g
A
A
D
Then put in the mattress (D).
d
STEP 7
Put down the cradle locks (f) to make the cradle stable.
T
ake it ,then it can swing.
f
UNLOCK
LOCK