dreambaby F820NN User manual

INSTRUCTIONS
Retractable Gate
F820NN (white)
F943NN (black)
F1012 (grey)
WARNING
WARNING– Incorrect installation can be
dangerous.
WARNING– Do not use the safety barrier if
any components are damaged or missing.
WARNING– The safety barrier must not be
fitted across windows.
WARNING– Never use this gate without
securely installed Locking Brackets and
Locking Hooks.
This safety barrier conforms to
EN1930:2011;
This safety gate is for domestic use only;
This safety gate has been designed for use
with children up to 24 months of age;
Never use with a child able to climb over or
dislodge/open the gate;
The surfaces that the gate is to be fixed to
must be suitable for the purpose and must
be structurally sound;
The clearance space between the Base of
Casing and the floor MUST NOT exceed
0.3cm (0.12in);
If the safety gate is used at the bottom of
stairs to prevent the child climbing up the
stairs, it must be placed at the front of the
lowest stair;
If the safety gate is used at the top of the
stairs to prevent child falling down the stairs,
it must not be placed on any stair below the
level of the top stair;
At the top of landing, position the gate
15cm (6in) away from the top step;
This safety gate has a manual close system;
This safety gate must NEVER be used as a
pool or pond barrier;
Never leave a child unattended.
This safety gate does not replace proper
adult supervision.
Patent No. 1/604,922
IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE
Read the entire instructions before assembling and installing this product.
If you sell or give away this product, make sure you give this instruction to the new owner.
INSTALLATION
Included
Pre-assembled
PARTS LIST
A
D
I
H
J
L
K
M
B
C
GE
H
G
Optional
Spacer Sets-A1/A2
(sold separately)
See Accessories Panel*
Optional
Spacer Sets -X1/X2
(sold separately)
See Accessories Panel*
Have on hand a tape
measure. pencil. drill with
4mm (5/32 x1in) drill bit
and a Phillips head
screwdriver.
A Gate Panel
B Cover
C Upper Bracket (x2)
D Lower Bracket (x2)
E Hook (x2)
F Hook (x2)
Included
G Locking Rod
H Screws 4x25mm (
5/32 x1in) (x16)
I Masonry/Brick Plugs (x16)
J Templates (x5)
K Base of Casing
L Top of Casing
M Release Button
Before you start
WARNING: This package contains small parts and sharp points in an
unassembled state. Keep out of reach of children. Adult assembly required.
This gate can cover
an area of up to
140cm (55in).
Includes 2 sets of mounting
brackets for convenient
'clip-on/clip-off' relocation
Optional
Accessories
(sold separately)
F821NN Spacer Sets (white)
F944NN Spacer Sets (black)
For use when gate is fitted to
Skirting boards / Baseboards
F895 Gate Adaptor Panel
To provide a flat surface
to install gate.
*
F820NN/F943NN/F1012 - v3-12/2015
H
H
H F
A2 A1
X1 X2
Door open:
right to left
Ouverture
de la porte :
de droite à gauche
La puerta se abre:
de la derecha a la
izquierda
Porta aberta:
direita para a
esquerda
Door open:
left to right
Ouverture
de la porte :
de gauche à droite
La puerta se abre:
de la izquierda a
la derecha
Porta aberta:
esquerda para
a direita
Door open:
right to left
Ouverture
de la porte :
de droite à gauche
La puerta se abre:
de la derecha a la
izquierda
Porta aberta:
direita para a
esquerda
Door open:
left to right
Ouverture
de la porte :
de gauche à droite
La puerta se abre:
de la izquierda a
la derecha
Porta aberta:
esquerda para
a direita
BRACKETS
SUPPORTS
DE FIXATION
SOPORTES
BRAÇADEIRA
HOOKS
CROCHETS
GANCHOS
HOOKS
CROCHETS
GANCHOS
HOOKS
CROCHETS
GANCHOS
HOOKS
CROCHETS
GANCHOS
Mounted
INSIDE
opening
Montage à
L’INTÉRIEUR
de l’embrasure
Montado
DENTRO da
abertura
Montado
abertura
para DENTRO
Mounted
OUTSIDE
opening
Montage à
L’EXTÉRIEUR
de l’embrasure
Montado
abertura
para FUERA
Montado
FORA da
abertura
Mounted
OUTSIDE
opening
Montage à
L’EXTÉRIEUR
de l’embrasure
Montado
abertura
para FUERA
Montado
FORA da
abertura
17/10/2015 17/10/2015 17/10/2015 17/10/2015 17/10/2015
Mounted
INSIDE
opening
Montage à
L’INTÉRIEUR
de l’embrasure
Montado
DENTRO da
abertura
Montado
abertura
para DENTRO

X1 + X2 X1 + X2
X1 + X2 X1 + X2
Top view of gate Side view of gate
bracket
spacer
hook
spacer
skirting board
baseboard
INSTALLATION
1. Choose best location for gate
Ensure the surface you are mount the gate is structurally sound such as solid timber, brick or masonry. For plaster/gyprock surface, locate the timber
beam or stud behind and mount in this location (mounting on plaster/gyprock alone is not strong enough and not safe). Do not mount to glass.
1c. Consider which side is more
convenient for handle position.
1b. Opening direction of
the gate can be
changed to suit
wall
wall wall
1a. Gate can be installed outside or inside door openings
MAX – 140cm/55in MAX – 129cm/51in
1d. If the gate is used at the bottom of the stairs
to prevent the child from climbing up the
stairs, it must be placed on the lowest stair.
1f. Make sure that the gate is mounted firmly and evenly in vertical position.
Bottom of stairs
1e. If the gate is to be used at the top of the stairs to
prevent the child from falling down the stairs, it
must not be placed on any stair below the level of
the top stair.
At the top of landing, position the gate 15cm (6in)
away from the top step.
Top of stairs
15cm
6in
1g. Skirting boards (baseboards)
If there is a skirting board (baseboard) to which the Retractable Gate is to be
attached, build up the wall areas equivalent to thickness of baseboard (skirting
board) with Spacers F821NN/F944NN (sold separately).
1h. Adaptor Panel
To provide a flat surface to install gate.
For 1.25cm (1/2in) skirting or
baseboards use:
For 1.90cm (3/4in) skirting or
baseboards use:
A1
A1
X2
A2
++
To purchase accessories, contact Tee-Zed Products for your nearest retail outlet: [e-mail]
Accessories (sold separately)
F895 Gate Adaptor Panel
1.
2
A1
A2 A1
mounted
inside
opening
mounted
outside
opening
Mounted INSIDE opening - with spacer
Mounted OUTSIDE opening - with spacer
Note: Hook Spacer to be mounted horizontally when
mounting gate outside door opening
door open
right to left
door open
left to right
door open
right to left
door open
left to right
X1
X1 X2
X1
X1

INSTALLATION
2
F
Mounted
Inside
Opening
door open
right to left
4
F
Mounted
Outside
Opening
door open
right to left
3
E
Mounted
Inside
Opening
door open
left to right
Select the Templates to use to suit your chosen gate position.
wall
floor
Keep the Templates vertical and ensure lower edge
is directly on the floor.
Mark hole positions with a pencil.
0.3cm
(0.12in)
3
2.
Locate the frame/stud and overlay
Hook and Bracket Templates.
3.
Screw in Brackets and Hooks (C,D,E,F) into wall or door frame using screws (H)
and if masonry or brick using Plugs (I).
4.
F
F
C
D
E
E
Use Bracket Template 1
and Hook Template -2
5
E
Mounted
Outside
Opening
left to right
door open
Use Hook Template 3
and Bracket Template -1
Use Bracket Template 1
and Hook Template -4
Use Hook Template 5
and Bracket Template -1
1
51/01/10
1
51/01/10
The clearance space
between the Base of
Casing and the floor
MUST NOT exceed
0.3cm (0.12in).
Mounted
Inside
Opening
door open
right to left
C
D
Mounted
Inside
Opening
door open
left to right
Mounted
Outside
Opening
door open
right to left
F
C
D
E
Mounted
Outside
Opening
door open
left to right
D
C
E
BRACKETS
F
Door open:
right to left
Ouverture
de la porte :
de droite à gauche
La puerta se abre:
de la derecha a la
izquierda
Porta aberta:
direita para a
esquerda
HOOKS
CROCHETS
GANCHOS
Mounted
INSIDE
opening
Montage à
L’INTÉRIEUR de
l’embrasure
Montado
DENTRO da
abertura
Montado
abertura
para DENTRO
17/10/2015
BRACKETS
SUPPORTS
DE FIXATION
SOPORTES
BRAÇADEIRA
17/10/2015
BRACKETS
SUPPORTS
DE FIXATION
SOPORTES
BRAÇADEIRA
17/10/2015
BRACKETS
SUPPORTS
DE FIXATION
SOPORTES
BRAÇADEIRA
17/10/2015
BRACKETS
SUPPORTS
DE FIXATION
SOPORTES
BRAÇADEIRA
17/10/2015
Door open:
left to right
Ouverture
de la porte :
de gauche à droite
La puerta se abre:
de la izquierda a
la derecha
Porta aberta:
esquerda para
a direita
HOOKS
CROCHETS
GANCHOS
Mounted
INSIDE
opening
Montage à
L’INTÉRIEUR
de l’embrasure
Montado
DENTRO da
abertura
Montado
abertura
para DENTRO
17/10/2015
Door open:
right to left
Ouverture
de la porte :
de droite à gauche
La puerta se abre:
de la derecha a la
izquierda
Porta aberta:
direita para a
esquerda
HOOKS
CROCHETS
GANCHOS
Mounted
OUTSIDE
opening
Montage à
L’EXTÉRIEUR
de l’embrasure
Montado
abertura
para FUERA
Montado
FORA da
abertura
17/10/2015
Door open:
left to right
Ouverture
de la porte :
de gauche à droite
La puerta se abre:
de la izquierda a
la derecha
Porta aberta:
esquerda para
a direita
HOOKS
CROCHETS
GANCHOS
Mounted
OUTSIDE
opening
Montage à
L’EXTÉRIEUR
de l’embrasure
Montado
abertura
para FUERA
Montado
FORA da
abertura
17/10/2015
BRACKETS
SUPPORTS
DE FIXATION
SOPORTES
BRAÇADEIRA
17/10/2015

TO USE TO REMOVE
CONTACT DETAILS
Tee-Zed acknowledges that its customers may be entitled to statutory consumer guarantees and does not seek
to exclude or limit them. These guarantees include that Tee-Zed’s products are of acceptable quality. This
Tee-Zed product is for the specific purpose detailed in the instructions and packaging and Tee-Zed considers use
outside of that purpose to be abnormal use. To the maximum extent permitted by law, Tee-Zed does not accept
any liability for damage:
• arising from abnormal use of the products;
• caused by installation or removal of the products other than in accordance with the supplied installation and
removal instructions; or
• arising under the law of tort or contract.
Tee-Zed Products Pty Ltd
PO Box 2022, Bondi Junction NSW 1355
Australia Tel: [phone]
[e-mail]
Tee-Zed Products (N.Z.) Ltd
PO Box 64013, Botany Town Centre, Auckland
New Zealand Tel: [phone]
[e-mail]
Tee-Zed Products Ltd
PO Box 29227, Dunfermline, KY12 2DN
United Kingdom Tel: [phone]
[e-mail]
Made in Shenzhen, China.
©2016 Tee-Zed Products Pty Ltd
Dreambaby
®
products by
www.dreambaby.com.au
www.dream-baby.co.nz
www.dreambaby.co.uk
www.youtube.com/dreambabytv
www.facebook.com/dreambabysafety
www.twitter.com/dreambabysafety
Slide Cover (B) from Top of Casing (L).
Press dismount Latch on Upper Bracket (C) and slide gate up.
• Gate must be fitted according to instructions, to ensure it works correctly.
• Regularly check gate to ensure it is fitted properly and securely. Adjust as required.
• Regularly check that brackets and hooks are securely in place.
• If gate is used outdoors, bring inside and keep out of rain, hail, snow or below freezing conditions.
• Do not use the safety gate if any components are damaged or missing.
• To clean, wipe surface with a damp cloth or sponge using mild detergent and warm water.
Never clean with abrasive, ammonia based bleach based or spirit type cleaners.
• Any additional and replacement parts should be obtained from Tee-Zed Products.
MAINTENANCE & CARE
To close the gate:
Press Release Button and twist clock-wise,
then pull the gate handle and without
stopping fit Locking Rod (G) into lower and
upper Hooks (E, F).
To open gate:
Press Release Button and twist
clock-wise then pull the gate handle out
from lower and upper Hooks (E, F).
NOTE: The noise you hear while the gate
retracts is designed to alert you, letting
you know that the gate is being opened.
For silent operation, hold Release Button down when retracting gate.
press
dismount
latch
B
C
C
L
L
F
4-1 4-2
*
conceals
latch
tab
notch
*
press
dismount
latch
*
reveal
latch
E
5a 5b
Checked the
direction you
want the gate
to open / close.
Align the notch
on Top of
Casing (L) with
the arrow on
the Upper
Bracket (C) in
desired open /
close direction.
wallwallwall
wallwallwall
conceals
Latch
Top view of gate Side view of gate
tab
arrow
notch
mount gate
on brackets
click
5c
Align the lower
part of gate to
Lower Bracket
(D) and top of
gate to Upper
Bracket (C).
Push down gently
to click into
place.
5d
Slide Cover (B) over
Upper Bracket (C)
until it covers
dismount Latch.
The Cover locks
the gate in place.
It must be securely
installed at all times.
1
click
2
C C
C
D
B
C
L
notch
L
To mount gate
5.
wall
4
Composition
The plastic parts are made of fibreglass-armed
polyamide, Polypropylene and Polyester.
Plastic parts: Nylon & Polyoxymethylene (POM)
materials.
Mesh fabric made of 40% polyester and 60% non-toxic
PVC coating.
Other components are made of steel and aluminium.
The materials are used for their durability and
resistance.
Spacers made of ABS (Acrylonitrile Butadiene Styrene).
INSTALLATION