Drive FC 2000 User manual

two year limited
warranty
Your Drive brand product is warranted to be free of
defects in materials and workmanship for two years
from the date of the original consumer purchase.
This device was built to exacting standards and
carefully inspected prior to shipment. This Two
Year Limited Warranty is an expression of our
confidence in the materials and workmanship of
our products and our assurance to the consumer of
dependable service.
In the event of a defect covered by this warranty, we
will, at our option, repair or replace the device.
This warranty does not cover device failure due to
owner misuse or negligence, or normal wear and
tear. The warranty does not extend to non-durable
components such as rubber accessories, casters, and
grips, which are subject to normal wear and need
periodic replacement.
If you have a question about your Drive device
or this warranty, please contact an authorized
Drive dealer.
© 2006 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China
first class chair
item# FC 2000 & FC 4000
EU Authorized Representative
Drive International, LLC
Globe Lane - Stockport
DUKINFIELD SK16 4RE, GB

first class chair
installation
1. Remove contents from carton.
2. Turn seat upside down and open knobs
(A) by turning counter clockwise (figure 1).
3. Slide back support bracket (B) into red seat
assembly (C) on the underside of the the seat.
4. Tighten knobs (A) to secure back.
5. Insert armrests as per diagram (figure 2).
adjustments
Seat Depth
Loosen knobs (A), pull/push back to the desired
position and tighten knobs to secure in place.
Seat Height
Loosen knobs (D) on each leg, pull/push inner leg to
desired position and tighten knobs to secure in place.
A 15˚ anterior or posterior tilt can be achieved by
setting front and back legs at different heights.
Armrest Height and Width
Loosen knob (E) and adjust height and width as
appropriate and tighten knob (E).
Lap Belt
Adjust belt length through belt buckle and secure
with the Velcro. Additional length can be achieved
by adjusting the placement of belt on Velcro strips
on the underside of seat.
figure 2
A
B
C
figure 1
D
accessories
(sold separately)
Description Item #
Tray FC 2024 & FC 4024
Footrest FC 2028 & FC 4018
Headrest FC 8000
Headrest Wedges WD 8000
Hip Guides FC 8027
Mobility Base FC 2029 & FC 4029
Leg Extensions FC 8050
Anti Tippers FC 2030 & FC 4030
Support Kit FC 8025 & FC 8025L
Clear Tray FC 2026 & FC
E