DSE DK-CL4-HDS User manual

Document: DK-CL4-HDS 2A1
Page: 1
USER'S MANUAL DK-CL4-HDS Camera with hidden video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
DK-CL4-HDS
Camera with WiFi DVR
Product description
DK-CL4-HDS is a video recorder with an integrated
camera hidden in an elegant table clock.
1. Display
2. Time setting
3. Target
4. Up key
5. Infrared illuminators
6. Down button
7. WiFi status indication LED
8. USB port
9. MicroSD slot
10. Charging LED indicator
11. Reset button
12. Camera on / off switch
13. Rechargeable battery
Use as a watch
DK-CL4-HDS is an investigative camera but it is also a
real digital clock fully functional so as not to arouse any
suspicion.
To adjust the clock, do the following:
1. Recharge the internal battery well
2. Press the button (2) to activate the time
adjustment
3. Adjust the time with the buttons (4) (6)
Supply
The camera is able to operate with the power supply of its
own internal 3Ah battery which allows several hours of
autonomy. The battery is recharged by connecting the
USB power supply for a few hours.
The DVR can also operate on mains power with the
included 220V / USB power supply.
In this case, the USB cable is kept connected even during
operation. The LED (10) lights up red during charging.
Movie storage
The video files are stored on a micro SD card (not
supplied). The movies have Full HD 1920x1080 resolution
at 25 f / sec. And they are saved in MP4 format with H264
compression
It is possible to use micro SD cards of any brand up to
128 GB of capacity. Over 300 hours of recording can be
stored on a 128GB SD card.
Obviously it is advisable to use motion detection
recording, where possible, in order to record only
meaningful images and not unnecessarily occupy memory
when no action takes place in front of the lens.
Once the memory has run out, the DVR will automatically
overwrite the oldest files if programmed in this way in the
configuration.
The duration of the individual files is also programmable in
the configuration.
Inserting the micro SD card
The first thing to do, if you want to make recordings, is to
insert the micro SD card into the slot in the DVR (9) which
can be accessed by removing the rear door.
It is possible to use micro SD cards with capacities up to
128 GB in CLASS 10 or higher.
A class 10 SD card has a write speed of 10 MB / s. Do not
use SD cards with lower speeds as they will lead to
malfunctions.
Pay attention to the direction of insertion of the SD card
which will slide into its seat only with the golden contacts
facing the USB socket.
No micro SD card is included in the package.
Charging the battery
Before using the device it is advisable to fully charge the
battery. To do this, you must first remove the plastic
protection that insulates the battery. Then connect the
USB port of the DVR to the computer or USB charger with
the supplied cable.
Full charging takes approximately 8 hours depending on
the initial charge state. It is recommended that you
comfortably let the charging complete overnight.
Next to the USB socket there is a red LED that turns on
during charging and turns off when charging is complete.
Turn on the device
DK-CL4-HDS is equipped with a power switch on the rear
(12). If you keep this switch OFF, only the clock will work,
but not the camera. When turned on, the DVR does not
emit any visible signal except the front blue LED that
signals the WiFi status (flashing = factory access point
mode, fixed = connected to external wifi network). This
LED can later be disabled via the app.

Document: DK-CL4-HDS 2A1
Page: 2
USER'S MANUAL DK-CL4-HDS Camera with hidden video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
To use the product you need to use a smartphone or
tablet with the HDSmartIPC app.
Download HDSmartIPC and setup
DK-CL4-HDS has been developed to be remotely
controlled via wifi with a mobile phone or tablet.
It is not necessary to have a wifi network to use DK-CL4-
HDS as the device is factory supplied in ACCCESS POINT
mode and generates a wifi network itself to which you can
connect with Android / iOS portable devices.
First you need to download the HDSmartIPC application
from Google Play or Apple Store, available for free for
Android and iOS.
To use the program, see the specific manual.
Once logged in with the app, you can intervene in the
configuration and connect the DVR to your wifi network.
All these operations are explained in the HDSmartIPC
application manual that you can download from the site.
IR illumination
DK-CL4-HDS is equipped with invisible infrared
illuminators with a range of about 10 meters. They turn
on and off via the app.
Audio
DK-CL4-HDS is equipped with a microphone for ambient
listening
Reset the DVR
If necessary, a RESET can be carried out by pressing the
reset button for 10 seconds with a deformed paperweight
clip or other thin object. After rebooting the DVR will
return to the factory Access Point mode.
Movie playback on PC
A computer and SD card reader (included) is required to
review and manage the files recorded by the DVR.
You have to turn off the DVR with the ON / OFF switch.
remove the micro SD card and insert it into a computer
SD card reader.
It is possible to copy the videos to the PC and play them
with any video player (VLC - VideoLan recommended).
ATTENTION: It is not possible to download files via the
USB cable of the DVR because this is used only for
recharging / powering the device.
Main technical characteristics
Sensor CMOS
Maximum resolution FullHD 1080p (1920x1080)
Frame rate 30 f / sec
Video format MP4 (H264 compression)
Photo format JPG
Overlay Date time (not excludable)
Functions Continuous recording
Motion recording
Timer recording
Live viewing only
WiFi control Range 10 m.
Audio microphone Incorporated
Audio speaker Incorporated
IR illuminator Invisible 10 m.
Video storage About 300 hours on 128GB at
1080P
Operating
temperature -5 ° + 40 ° C
Memory MicroSD Class 10 or higher
Memory capacity 4..128 GB