DSE DK-SP1-HDS User manual

Document: DK-SP1-HDS 2I0
Page: 1
USER'S MANUAL DK-SP1-HDS Camera with hidden video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
DK-SP1-HDS
Motorized camera with WiFi DVR
Product description
DK-SP1-HDS is a video recorder equipped with an
integrated camera hidden in an elegant desktop bluetooth
speaker.
1. Target
2. Illuminator with invisible IR
3. Speaker
4. Ignition switch
5. Reset button
6. USB socket for PC or USB charger
7. Bluetooth switch
8. WiFi / Power LED
9. MicroSD card slot
10. Bluetooth LED
Use as a bluetooth speaker
DK-SP1-HDS is an investigative camera but it is also a
true bluetooth speaker perfectly working for your mobile
so as not to arouse any suspicion.
To use the speaker proceed as follows:
1. Briefly press button 7
2. The speaker turns on and Ding Dong is heard
3. In your smartphone go to bluetooth, search for
the 022BT signal and connect
4. Now you can play a piece of music on your phone
and hear it through the speaker
Supply
The camera is able to operate with only the power supply
of its internal 5Ah battery which allows 8-10 hours of
autonomy. The battery is recharged by connecting a USB
power supply for 10/12 hours.
The DVR can also operate on mains power with a 220V /
USB power supply such as RE-AL4USB.
In this case, the USB cable is kept connected even during
operation. LED 8 lights up green during charging
Movie storage
The video files are stored on a micro SD card (not
supplied). The movies have Full HD 1920x1080 resolution
at 25 f / sec. And they are saved in MP4 format with H264
compression
It is possible to use micro SD cards of any brand up to
128 GB of capacity.
1 hour of recording occupies an average of 420MB so on a
128GB SD card you can store over 300 hours of recording.
Obviously it is advisable to use motion detection
recording, where possible, in order to record only
meaningful images and not unnecessarily occupy memory
when no action takes place in front of the lens.
Once the memory has run out, the DVR will automatically
overwrite the oldest files if programmed in this way in the
configuration.
The duration of the individual files is also programmable in
the configuration.
Inserting the micro SD card
The first thing to do, if you want to make recordings, is to
insert the micro SD card in the appropriate slot in the DVR
(9)
It is possible to use micro SD cards with capacities up to
128 GB in CLASS 10 or higher.
A class 10 SD card has a write speed of 10 MB / s. Do not
use SD cards with lower speeds as they will lead to
malfunctions.
Pay attention to the insertion direction of the SD card
which will slide into its seat only with the gold contacts
facing upwards.
No micro SD card is included in the package.

Document: DK-SP1-HDS 2I0
Page: 2
USER'S MANUAL DK-SP1-HDS Camera with hidden video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
Charging the battery
Before using the device, it is advisable to fully charge the
battery. To do this, connect the USB port of the DVR to
the computer or to a USB charger with the supplied cable.
Full charging takes approximately 12 hours depending on
the initial charge state. It is recommended that you
comfortably let the charging complete overnight.
Next to the USB socket there is a red LED that turns on
during charging and turns off when charging is complete.
Turn on the device
DK-SP1-HDS is equipped with a power switch located next
to the USB (4). When turned on the DVR does not emit
any visible signal except a red LED. It is necessary to act
on a smartphone and a tablet with the HDSmartIPC app to
use it.
Download HDSmartIPC and setup
DK-SP1-HDS has been developed to be remotely
controlled via wifi with a mobile phone or tablet.
It is not necessary to have a wifi network to use DK-SP1-
HDS as the device is factory supplied in ACCCESS POINT
mode and it generates a wifi network itself to which you
can connect with Android / iOS portable devices.
First you need to download the HDSmartIPC application
from Google Play or Apple Store, available for free for
Android and iOS.
To use the program, see the specific manual.
Once logged in with the app, you can intervene in the
configuration and connect the DVR to your wifi network.
All these operations are explained in the HDSmartIPC
application manual that you can download from the site.
Motorization
DK-SP1-HDS is a motorized camera. On startup it
performs a test rotation. You can check the movements
via the app
IR illumination
DK-SP1-HDS is equipped with invisible infrared
illuminators with a range of about 10 meters. They turn
on and off via the app.
Two-way audio
DK-SP1-HDS is equipped with a microphone for ambient
listening and a loudspeaker to speak and be heard in the
room.
Reset the DVR
If necessary, a RESET can be carried out by pressing the
reset button for 10 seconds with a deformed paper clip or
other thin object. After rebooting the DVR will return to
the factory Access Point mode.
Movie playback on PC
A computer and SD card reader (included) is required to
review and manage the files recorded by the DVR.
You have to turn off the DVR with the ON / OFF switch.
remove the micro SD card and insert it into a computer
SD card reader.
It is possible to copy the videos to the PC and play them
with any video player (VLC - VideoLan recommended).
ATTENTION: It is not possible to download the files
through the USB cable of the DVR because this is used
only for recharging / powering the device.
Main technical features
Sensor CMOS
Maximum resolution FullHD 1080p (1920x1080)
Frame rate 30 f / sec
Video format MP4 (H264 compression)
Photo format JPG
Overlay Date time (not excludable)
Functions Continuous recording
Motion recording
Timer recording
Live viewing only
WiFi control Range 10 m.
Audio microphone Incorporated
Audio speaker Incorporated
IR illuminator Invisible 10 m.
Video storage About 300 hours on 128GB at
1080P
Operating
temperature -5 ° + 40 ° C
Memory MicroSD Class 10 or higher
Memory capacity 4..128 GB