DSE DK-V2M User manual

Document: DK-V2M 2A2
Page: 1
DK-V2M Dash Cam Car CameraUSER MANUAL
DK-V2M One hour of recording of both cameras takes up an average of 6
GB, so about 20 hours of continuous recording can be stored on a
128GB SD card.
Camera
black box for cars
Andvideo recorder
Composition of the product
Format the microSD card
If you have inserted a new SD card you will need to format it before
you can use it for recording. You can do this later by performing the
first power up.
The camera alerts you with an on-screen message when it detects
an unformatted SD card.
1. Dashcam camera in rear view mirror
2. Rear cameras
3. Connection cable for rear view camera
4. USB power cable from car lighter
Product description
DK-V2M is a rearview mirror car video recorder, equipped with an
integrated front camera and a second separate rear camera. It is
designed to be mounted on top of the original rearview mirror with
the special elastic fasteners that adapt to any vehicle.
Agree to format by tapping the button on the touchscreen to start
recording.
Installation of the dashcam with cigarette lighter power
supply
The dashcam is supplied with a cigarette lighter power cable that
takes the 12VDC from the vehicle lighter and supplies 5VDC to the
camera, with MiniUSB connector.
It is the fastest way to install the dashcam.
1 - MONITOR ON AND OFF BUTTON 2 - MINIUSB CONNECTOR
FOR POWER SUPPLY 3 - REAR CAMERA MINIJACK CONNECTOR 4 -
MICROSD CARD SLOT (NOT INCLUDED)
5 - CONNECTOR NOT USED 6 - RESET
BUTTON (ON THE BACK)
Insert the microSD card
The first thing to do, if you want to make recordings, is to insert the
micro SD card into the appropriate slot in the DVR (4)
It is possible to use micro SD cards with capacities up toto 128 GB
in CLASS 10or higher. The SD card is not included in the package.
DSE srl - Digital Surveillance Equipment - www.dse.eu
Translated from Italian to English - www.onlinedoctranslator.com

Document: DK-V2M 2A2
Page: 2
DK-V2M Dash Cam Car CameraUSER MANUAL
The lighter cable supplied with the camera has a cable that is long
enough to be hidden along the rear window gasket and then
reaches the lighter socket by passing under the dashboard.
you will have to turn the dashcam on and off manually with the
ON / OFF button (1).
Installation of the dashcam with power supply from the
fuse control unit
If you want to install the dashcam so that you do not have any
visible cables inside the vehicle, you can purchase our installation
kit separately, in theMiniUSB version, suitable for this dashcam,
The kit includes the cables and connectors to connect to the
vehicle's fuse box. It also includes a 12V / 5VDC transformer with
battery saver that is able to disconnect the dashcam when the
vehicle's battery begins to run out, a very useful function if you use
the dashcam with the vehicle stationary.
NOTE: This model supports cable connection
+ BAT (voltage always present) and also of the ACC cable (voltage
only with ignition on). If you connect both cables, the camera will
turn on and off automatically with the vehicle, but you can also
activate it at will when the vehicle is stationary for surveillance while
parked.
For the installation of the dashcam kit you can consult the specific
installation kit manual.
The camera is placed over the rear view mirror of the car using the
two rubber bands included
Installing the rear view camera
This dashcam is equipped with 2 cameras for front and rear
shooting.
The front camera is built into the dashcam, while the rear camera is
connected to the AV IN connector (3) with the cable provided and
positioned on the rear of the vehicle.
The front lens is mounted on an adjustable support that you can
adapt to your vehicle to get a perfect shot of the road.
You can arrange the rear camera inside the vehicle, so that it
shoots through the rear glass (A), or mount the camera outside,
above the license plate (B), preferably having it installed by a
professional. The camera is perfectly waterproof and small in size.
The function of the original rearview mirror is replaced by the
dashcam so it is not possible to install this camera without
connecting the external rear view camera.
Most vehicles only supply power to the cigarette lighter with the
ignition on. In this case, the camera will turn on and off
automatically together with the vehicle panel.
Some vehicles supply power to the lighter constantly, even when
the vehicle is stationary. In this case
DSE srl - Digital Surveillance Equipment - www.dse.eu

Document: DK-V2M 2A2
Page: 3
DK-V2M Dash Cam Car CameraUSER MANUAL
sufficient capacity to allow normal use without power.
Each time the camera is turned on, it automatically starts recording.
Turn off the dashcam and monitor
To turn off the camera completely, press and hold the ON / OFF
button (1) for a few seconds. A sound pattern confirms that the
device is turned off.
The connection cable is included. On the camera side there is a red
cable that you can connect to the positive that turns on the rear
lights to automatically bring the rear camera to full screen when
reverse gear is engaged. If you don't want this feature you can
leave the red cable unused.
ATTENTION. If the GUARD / PARKING function is active, the camera
restarts automatically when a shock is detected.
To turn off the screen only and keep the camera running, briefly
press the ON / OFF button (1). Switching off the screen is
recommended in surveillance during parking to conserve the
battery. To turn the monitor back on, you can press the ON / OFF
button again or touch the touchscreen.
Touchscreen control
This dashcam is equipped with a large 12 ”touchscreen that
simulates the rear view mirror. The home screen shows the rear
view camera in full screen by default and this will also be the setting
you will keep while driving as the vehicle's original mirror is no
longer usable.
In this way, the dashcam offers a better view of the normal rear-
view mirror, not suffering from obstacles placed on the rear seat.
can drag your finger on the screen to the right or left to change
the camera on screen or also to activate the dual view of the
cameras
Turn on the camera
The camera turns on automatically when it receives power through
the USB port and turns off in seconds if it fails. If you only supply
power to the camera when the vehicle is running, it will turn on and
off together with the vehicle.
If you supply power to the camera continuously you will instead
have to turn the camera on and off manually by holding down the
power button (1) for a few seconds.
This model also supports both types of power supplies when
installed with the installation kit for the fuse box.
You can alsodrag your finger up or downto change the viewing
angle up or down.
Touching the screen briefly displays the brightness control bar at
the top of the screen
And the control menu bar at the bottom
TO B. C. D. AND F. G.
A - Activates and deactivates audio recording B - Changes
the camera shown on the screen C - Accesses playback of
recordings
D - Activate and Stop recording E - Take
an instant photo
F - Protects the recording video from overwriting. G - Accesses
the settings
The camera has an internal battery which is used to allow the
camera to stop safely when the power fails and also for operation
in parking mode. The battery does not have
DSE srl - Digital Surveillance Equipment - www.dse.eu

Document: DK-V2M 2A2
Page: 4
DK-V2M Dash Cam Car CameraUSER MANUAL
Video settings menu
Tap the gear icon to open the settings menu
CLICKING SOUND - Activates the confirmation beep each time the
touchscreen is touched. Default: ON
VOLUME - Adjusts the volume of the loudspeaker LANGUAGE -
Selects the language among which the Italian option is also
available
FLICKER - Choose the refresh rate of the screen at 50Hz or 60Hz.
Default: 50Hz (Europe)
AUTO SHUTDOWN LCD - Activates the automatic shutdown of the
device after 1 or 3 minutes of inactivity. Default: OFF
GRAVITY - Here you enable the collision sensor (G-SENSOR) which
detects impacts to the vehicle. This sensor is used to detect when
the vehicle has been hit and automatically protect video files from
overwriting. You can set the sensitivity Low, Medium and High.
Default: OFF
REAR MIRROR - Enables reversing of the rear view camera image to
simulate the rearview mirror. Default: OFF
DISPLAY MODE PWRON - Choose which camera to automatically
show at startup (Front or Rear). Default: Rear
CLOCK SETTING - Set the date and time
DATE FORMAT - Choose the date display format
TIME FORMAT - Choose the display format: 12 or 24 hours
RESET TO DEFAULT SETTING - Restores the factory parameters
FORMAT TF-CARD - Format the camera's micro SDcard. This
operation deletes all the data contained in the memory.
FW VERSION - Shows the product version
RESOLUTION - Available only 1080P for the front camera and 720P
for the rear
LOOP RECORDING - Enables continuous recording so the camera,
once the memory has run out, continues to record overwriting the
oldest files. You can define the duration of the individual video files
(1,3,5 minutes). Default: 1 m.
NIGHT SCENE MODE - This option improves low-light night vision,
but increases video noise so it can degrade overall shooting quality
THE RECORDING - Activates or pauses the recording. PARKING
MONITORING - This is a convenient function for monitoring your
car while parking. If you activate this function, the camera does not
turn off completely when you switch off the power or press the off
button, but remains in PARKING mode with shock detection,
consuming very little battery. If the vehicle is hit, the camera turns
on, starting recording for 30 seconds and then returning to
standby. Video files recorded in this mode are automatically
protected from overwriting.
The shock detection works on battery so you can use it in parking
even if your car does not supply current from the cigarette lighter
socket with the ignition off.
The P icon tells you that the function is active during live viewing
General settings menu
Tap the gear icon to open the settings menu
Playback of movies
Press the C button to access playback of recorded video
TO B. C. D. AND F. G.
The videos are divided into 3 folders: NORMAL - Normal continuous
recordings EMERGENCY VIDEO - Recordings automatically due to
the intervention of the collision sensor (G-Sensor)
PHOTO - Photos taken with the PHOTO button
In each folder you can select the front (FRONT) or rear (REAR)
camera.
carried out
DSE srl - Digital Surveillance Equipment - www.dse.eu

Document: DK-V2M 2A2
Page: 5
DK-V2M Dash Cam Car CameraUSER MANUAL
Tap a file to play it. Tap the trash can to delete it. Tap the lock to
protect the file from being overwritten.
The protection of movies
When the memory is full, the camera continues to record
overwriting the oldest files. Since the memory can hold a few hours
of recording it is essential to protect important files from being
overwritten so that they are not deleted.
To protect a file just touch the key with the padlock in the playback
section. Protected video is identified by the closed padlock icon.
As we have already seen, in the live view there is also a padlock
button F with which you can protect the current file, for example
when an accident or a significant episode occurs.
The collision sensor (G-Sensor / Gravity) also automatically activates
file protection in the event of an accident. Videos recorded in
GUARD / PARKING mode are also automatically overwrite
protected.
Saving Videos to Computer
To save .TS video files on your computer you need to extract the
microSD card and insert it into an SD card reader (not included).
You will find the files divided into folders and you can copy the files
to be saved to your PC.
You can play the files with normal video players like VLC.
Main technical characteristics
Sensor
Maximum resolution
CMOS
Tel.1 FullHD 1080p (1920x1080) Tel.2
FullHD 720p (1280x720)
25 f / sec
Tel 1-2 TS (H264)
Date time (not excludable)
Continuous recording
Parking registration
Incorporated
No
No
MicroSDcard max 128GB
About 20 hours of recording
- 20 ° + 70 ° C
Frame rate
Video format
Overlay
Functions
Audio microphone
Audio speaker
IR illuminator
Video storage
Temperature
operation
Memory
Memory capacity
Monitor
Diet
Photo resolution
from
MicroSD Class 10 or higher
Up to 64GB
12 "touchscreen
5VDC mini USB
1920x1080 / 1280x720
DSE srl - Digital Surveillance Equipment - www.dse.eu