DSPM Defender Micro User manual
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
Maintenance Manual #074-1000-02
Phone: 1.877.DSPM.POWER
1.877.377.6769
Fax: 909.930.3335
Website: www.DSPManufacturing.com
E-Mail: techsupport@dspmanufacturing.com
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
1
’
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
1
1
2’
2
3
-
-
2
3
-
5
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
NR July 26, 2016 Renovation Release
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
Digital Signal Power Manufacturer, Inc Digital Signal
Power Manufacturer
Digital Signal Power Manufacturer
Digital Signal Power Manufac-
turer Digital Signal Power Manufacturer
© 2016 Digital Signal Power Manufacturer, Inc. - All rights reserved
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
For technical support or help with any questions not covered in the manu-
al, contract.
DSPM Inc.
1921 S. Quaker Ridge Place
Ontario, CA 91761
Work Hours: 8 a.m. – 5 p.m. Pacific Standard Time
Phone:1(877) DSPM POWER
1(877) 377-6769
After Hours: 5 p.m. – 1 a.m. Pacific Standard Time
1(951) 840-0811
Fax: 1(909) 930-3335
Email: [email protected]m
Internet: http://www.DSPManufacturing.com
To expedite assistance if required, Please have the following information from your unit’s System Label
(found on the right side and inside door panel) available:
Thank you for selecting this Emergency Lighting Inverter System (ELI). It provides you with perfect protection for
connected loads and equipment.
It includes important safety and instruc-
tions for operating the Emergency Lighting Inverter System. If you should have any problems with the Emergen-
cy Lighting Inverter System, please refer to this manual and/or call technical support.
While every precaution has been made to ensure accuracy and completeness in this manual,
DSPM assumes no responsibility and disclaims all liability for damages resulting from the use of this information
or for any errors or omissions.
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
a risk of electric shock, personal inju-
ry, or death to
A Caution notice icon conveys to the user or service personnel information mak-
ing them aware that there is a possibility of equipment damage.
A Note notice icon indicates when the user should make a reference of infor-
mation regarding the UPS operation, load status and display status. Such infor-
mation is essential if DSPM, Inc. field service assistance and correspondence is
required.
ninterruptibleowerystem
Following safety precautions is important when operating or servicing electrical equipment. Always heed these
precautions since they are essential to the safe operation and servicing of this product.
The symbols are used extensively
throughout this manual and are defined below. To ensure the safety of operating performance of this electrical
equipment, these instructions must be adhered too.
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
The product is an advanced Emergency Lighting Inverter System based on Intelligent Microprocessor
Control. The Emergency Lighting Inverter System is an intelligent protector and provides pure, reliable
AC power to the emergency loads – protecting them from utility power blackouts, swells, sags, surges
and interference. All types of lamps are supported by our lighting inverter.
Under normal power conditions, this design enables the system to adjust and filter power fluctuations
continuously and automatically. In the event of a power failure, it can immediately provide back-up power
from the batteries without any interruption. When the utility power is connected or reconnected, the
charger will automatically recharge the batteries.
The Advanced Battery Management system in this unit uses a Digital Signal Processing/Pulse-Width
Modulation (DSP/PWM) Smart Battery Monitoring System for managing the system batteries. The DSP/
PWM Smart Battery Monitoring System is temperature compensated resulting in maintaining maximum
runtime and battery life. The microprocessor controls recharge and the DSP/PWM offer overcharge pro-
tection.
incorporates double-conversion technology that provides
perfect protection specifically for Egress Lighting for facilities. It
The load is powered by the inverter, which receives its power from
the building source.
The inverter uses of a double-conversion principle eliminates all sources of unwanted power disturb-
ances. A rectifier converts the alternating current from the building source to Direct Current (DC). This
DC charges the batteries and powers the inverter. With the basic DC voltage, the inverter generates a
sinusoidal alternating current (AC) voltage, which continuously supplies the load. In times of power out-
rages, the 90-minute backup time that come standard in our units keep the load energized.
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
to operate all emergency lighting fixtures at “full-light” out-
put, commercial/industrial environments in a small footprint.
The UPS System Label displays the rated kW as well as nominal voltages. There are System Labels located
on the interior side of the UPS front door and the exterior side of the unit. The power rating in Table 1 are kW
values, when KVA is displayed on System Label, divide kVA in Table 1 by.8 for correct dimensions.
the most advanced performance and reliability fea-
tures.
Microprocessor controlled recharge and DSP/PWM overcharge
Standard or electronic ballasts, dimming devices or panels,
Standard or LED Exits and other safety equipment
Provides overload, surge and undercurrent protection using
Table 1
Micro
Power
Rating
UPS Battery Weight British
Thermal
Unit
Battery
Type
Voltage
Output
Protection
Safety
Approvals
Series
’
17.5” 22.5” 8”
17.5” 22.5” 8”
17.5” 22.5” 8”
17.5” 22.5” 8”
17.5” 22.5” 8”
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
complete self diagnostic capabilities and LED Monitoring
lighted environment prior to an emer-
gency. The three phase power supplies are able to do a 5 minute battery run the first of every
month except for New Year’s day when the test is for 90 minute. The testing can be enabled by
going to the Autorun screen and selecting Yes or No with the Menu Forward or Menu Reverse but-
ton. When the battery test happens the rectifier is turned off, and the batteries will sustain the load
on the output. If the voltage dips too low the test is terminated prematurely, and a entry is record-
ed in the alarm log accordingly. Two minutes into the battery run test the voltage, power date, and
time are logged in the battery log. This is a feature that is standard in our 3-phase power supplies.
Water Dots are placed on every shelf and door panel to indicate if moisture is present or has got
inside the unit. The Dots are originally white in color but will turn red when water is absorbed.
Forced air cooling for maximum reliability
ECM - Environmental Circuit Module allows fixtures and lamps on the emergency circuit (s) to be
operated by normal switching and/or dimming devices in NON-emergency conditions
Dimming Panel Interface allows use with emergency lights
Maintenance contracts available
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
Factory-trained personnel should perform maintenance only. Factory training is available. Training can be
done on-site, over the phone or at the factory. Various maintenance contracts are available; please contact
“Customer Service” for more details.
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
2)
’
Servicing Agreement the UPS system should
be tested and measurement taken log in a Operator’s/Maintenance Log. Failure
to maintain a valid maintenance log could result in the voiding of all warranties.
DSPM recommends the downloading and uses of the
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
entries should contain the following information:
Dates that battery maintenance was performed
Servicing Agreement, the batteries should be tested and
measurement taken log in a Batteries Maintenance Log. Failure to maintain a valid bat-
teries log could result in the voiding of all warranties. DSPM recommends the uses and
downloading of the
entries should contain the entries in our recom-
mended log (
).
-
4.4.3.C. Establishing Batteries Serial Numbers
Establish a system to identify individual batteries. Such a system that can be used is
one that identifies the battery cabinet, each shelf, and each battery. Using either a
clockwise or counter clockwise pattern, each battery need to have a unique serial num-
ber.
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
Test Date
Location
Battery Model #
# Batteries per string
Enclosure Temperature
Ambient Temperature
Float Voltage (V)
Float Current (A)
Test Load (A) or (Watts)
Test end Voltage
Test Spec. Runtime
Test Actual Runtime
Serial #
Voltage Under load
Ohmic Value
1.877.377.6769
Fax: 909.930.3335
Micro
074-1000-02 --
Lighting Inverter Maintenance Manual
Battery Temp
Observations
Result：
Technician
Date
Other manuals for Defender Micro
1
This manual suits for next models
2
Table of contents
Other DSPM Inverter manuals
Popular Inverter manuals by other brands
TTI
TTI TGA1230 user manual
SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO.
SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO. EDS1000 series Service manual
Omron
Omron VARISPEED F7 datasheet
SOLINTEG
SOLINTEG OGS-3.6K user manual
Hyundai Electric
Hyundai Electric N800 Series installation manual
Sungrow
Sungrow SG2500U-MV System manual
Generac Power Systems
Generac Power Systems 005342-6 owner's manual
ZCS
ZCS Azzurro 3PH 20000TL-V2 user manual
enphase
enphase EP200G101-M240US01 Quick install guide
CMP
CMP SOLAR LITE DE96268F quick start guide
Sonnen
Sonnen sonnenBatterie pro 2.0 Instructions for use
Isolite
Isolite E3MINI Series Installation & operation manual