DSPM Defender Mini User manual

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AECRev: NR Page#: - 1 -
Description: Lighting Inverter Maintenance Manual
439 S. Stoddard Avenue
San Bernardino, CA 92401
Date: 05/28/2020
Maintenance Manual
Phone: 1.877.DSPM.POWER
1.877.377.6769
Fax: [phone]
Website: www.DSPManufacturing.com
E-Mail: [e-mail]
$75
Price Each
Defender Mini Online Emergency Lighting Inverter
Eternalight Mini Online Emergency Lighting Inverter
Cobra Mini Standby Emergency Lighting Inverter
Eternalight Mini Standby Emergency Lighting Inverter

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AECRev: NR Page#: - 2 -
Description: Lighting Inverter Maintenance ManualDate: 05/28/2020
TABLE OF CONTENTS
TABLE OF CONTENTS 2
REVISION HISTORY 4
REPRODUCTION OR DISTRIBUTION FORBIDDEN 5
6
6
IMPORTANT SAFETY INSTRUCTIONS 7
7
CHAPTER 1 11
12
12
12
13
13
13
1— - 13
14
2— - - 14
14
3— - - 14
15
4— - - 15
16
5— - - 16
CHAPTER 2 SPECIFICATIONS 17
1— 17
17
17
17
17
17
17
17
18
18
18
18
18
439 S. Stoddard Avenue
San Bernardino, CA 92401

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AECRev: NR Page#: - 3 -
Description: Lighting Inverter Maintenance ManualDate: 05/28/2020
CHAPTER 3 FIELD REPLACEABLE UNITS (FRUS) 19
19
19
CHAPTER 4 MAINTENANCE 20
20
21
22
22
’ 22
22
22
6— 22
22
1— 25
2— ’ 27
7— 27
29
30
CHAPTER 5 DISPLAYS 31
31
8— 31
CHAPTER 6 OPERATION AND PROCEDURE 33
- 33
- 33
33
33
CHAPTER 7 SYSTEM OPTIONS 34
34
36
2— 38
CHAPTER 8 APPENDIXES 39
39
3— 39
4— 40
9— 41
10— 42
43
46
439 S. Stoddard Avenue
San Bernardino, CA 92401

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AECRev: NR Page#: - 4 -
Description: Lighting Inverter Maintenance ManualDate: 05/28/2020
REVISION HISTORY
REV
LIST OF EFFECTIVE PAGES
44 A
439 S. Stoddard Avenue
San Bernardino, CA 92401

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AECRev: NR Page#: - 5 -
Description: Lighting Inverter Maintenance ManualDate: 05/28/2020
Digital Signal Power Manufacturer, Inc Digital Signal
Power Manufacturer
Digital Signal Power Manufacturer
Digital Signal Power Manufac-
turer Digital Signal Power Manufacturer
© 2020 Digital Signal Power Manufacturer, Inc. - All rights reserved
439 S. Stoddard Avenue
San Bernardino, CA 92401

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AECRev: NR Page#: - 6 -
Description: Lighting Inverter Maintenance ManualDate: 05/28/2020
Technical Assistance
For technical support or help with any questions not covered in the manual,
contract.
DSPM Inc.
439 S. Stoddard Avenue
San Bernardino, CA 92411
Work Hours: 8 a.m. – 5 p.m. Pacific Standard Time
Phone:1(877) DSPM POWER
1(877) 377-6769
After Hours: 5 p.m. – 1 a.m. Pacific Standard Time
1(951) 840-0811
Fax: [phone]
Email: [e-mail]
Internet: http://www.DSPManufacturing.com
To expedite assistance if required, Please have the following information from your unit’s System Label
(found on the right side and inside door panel) available:
Model:
Model Number:
S/O Number:
Input Voltage:
Output Voltage:
Power Rating and Frequency:
About this Manual
Thank you for selecting this Emergency Lighting Inverter System (ELI). It provides you with perfect protection for
connected loads and equipment.
It includes important safety and instruc-
tions for operating the Emergency Lighting Inverter System. If you should have any problems with the Emergen-
cy Lighting Inverter System, please refer to this manual and/or call technical support.
While every precaution has been made to ensure accuracy and completeness in this manual,
DSPM assumes no responsibility and disclaims all liability for damages resulting from the use of this information
or for any errors or omissions.
How to use this Manual
439 S. Stoddard Avenue
San Bernardino, CA 92401

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AECRev: NR Page#: - 7 -
Description: Lighting Inverter Maintenance ManualDate: 05/28/2020
a risk of electric shock, personal inju-
ry, or death to
CAUTION: A Caution notice icon conveys to the user or service personnel information mak-
ing them aware that there is a possibility of equipment damage.
NOTE:
A Note notice icon indicates when the user should make a reference of infor-
mation regarding the UPS operation, load status and display status. Such infor-
mation is essential if DSPM, Inc. field service assistance and correspondence is
required.
ENSURE THAT NO FLUIDS OR OTHER FOREIGN OBJECTS CAN ENTER THE IN-
VERTER SYSTEM.
(Uninterruptible Power System) OR BATTERY SYSTEMS. FAILURE TO DO SO
COULD RESULT IN ELECTROCUTION, FIRE, EXPLOSION, OR EQUIPMENT FAIL-
URE.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Notes and Safety Information
Following safety precautions is important when operating or servicing electrical equipment. Always heed these
precautions since they are essential to the safe operation and servicing of this product.
The symbols are used extensively
throughout this manual and are defined below. To ensure the safety of operating performance of this electrical
equipment, these instructions must be adhered too.
439 S. Stoddard Avenue
San Bernardino, CA 92401

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AECRev: NR Page#: - 8 -
Description: Lighting Inverter Maintenance ManualDate: 05/28/2020
ELEC-
TRICIAN WHO IS EXPERIENCED IN WIRING THIS TYPE OF EQUIPMENT.
CAUSE DAM-
AGE TO THE EQUIPMENTS, INJURY OR DEATH OF PERSONNEL.
MAKING ANY ELECTRI-
CAL CONNECTIONS.
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY, AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THIS MAN-
UAL, MAY CAUSE INTERFERENCE TO RADIO COMMUNICATIONS. IT HAS BEEN
TESTED AND FOUND TO COMPLY WITHIN THE LIMITS FOR A COMPUTING DE-
VICE PURSUANT TO SUB PART J OF PART 15 OF FCC RULES, WHICH ARE DE-
SIGNED TO PROVIDE REASONABLE PROTECTION AGAINST SUCH INTERFER-
ENCE WHEN OPERATED IN A COMMERCIAL ENVIRONMENT.
LETHAL VOLTAGES EXIST WITHIN THE EQUIPMENT DURING OPERATION.
OB-
SERVE ALL WARNINGS AND CAUTIONS IN THIS MANUAL. FAILURE TO COMPLY
MAY RESULT IN SERIOUS INJURY OR DEATH. OBTAIN QUALIFIED SERVICE FOR
THIS EQUIPMENT AS INSTRUCTED.
DISCONNECTED, HIGH VOLTAGE AT THE FILTER CAPACITORS AND POWER
CONTACT.
439 S. Stoddard Avenue
San Bernardino, CA 92401

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 9 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020











1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 10 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020
 







❖
❖
 







1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 11 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020


The product is an advanced Emergency Lighting Inverter System based on Intelligent Microprocessor
Control. The Emergency Lighting Inverter System is an intelligent protector and provides pure, reliable
AC power to the emergency loads – protecting them from utility power blackouts, swells, sags, surges
and interference. All types of lamps are supported by our lighting inverter.
Under normal power conditions, this design enables the system to adjust and filter power fluctuations
continuously and automatically. In the event of a power failure, it can immediately provide back-up power
from the batteries without any interruption. When the utility power is connected or reconnected, the
charger will automatically recharge the batteries.
The Advanced Battery Management system in this unit uses a Digital Signal Processing/Pulse-Width
Modulation (DSP/PWM) Smart Battery Monitoring System for managing the system batteries. The DSP/
PWM Smart Battery Monitoring System is temperature compensated resulting in maintaining maximum
runtime and battery life. The microprocessor controls recharge and the DSP/PWM offer overcharge pro-
tection.
incorporates double-conversion technology that provides per-
fect protection specifically for Egress Lighting for facilities. It
The load is powered by the inverter, which receives its power from the
building source.
The inverter uses of a double-conversion principle eliminates all sources of unwanted power disturb-
ances. A rectifier converts the alternating current from the building source to Direct Current (DC). This
DC charges the batteries and powers the inverter. With the basic DC voltage, the inverter generates a
sinusoidal alternating current (AC) voltage, which continuously supplies the load. In times of power out-
rages, the 90-minute backup time that come standard in our units keep the load energized.


1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 12 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020



1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 13 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020


1. —Environmental Control Module
2. —Normally OFF Circuit 120Vac or 277Vac
3. —Normally OFF “Hold On” Circuit 120Vac or 277Vac
4. —Output Circuit Breaker/(s) 120Vac or 277Vac
5. —Emergency Power Off
6. —Emergency Power Off
7. —Remote Indicator Panel
8. —SNMP Card
9. —Fax Modem
10. —Modbus Interface
11. —Form C Contacts
12. —Onsite Startup
13. —Extended Warranty


1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 14 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 15 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 16 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020


1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 17 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020
the most advanced performance and reliability features.


Microprocessor controlled recharge and DSP/PWM overcharge
Standard or electronic ballasts, dimming devices or panels,
Standard or LED Exits and other safety equipment




Provides overload, surge and undercurrent protection using
to operate all emergency lighting fixtures at “full-light” out-
put, commercial/industrial environments in a small footprint.
The UPS System Label displays the rated kW as well as nominal voltages. There are System Labels located
on the interior side of the UPS front door and the exterior side of the unit. The power rating in Table 1 are kW
values, when KVA is displayed on System Label, divide kVA in Table by.8 for correct dimensions.
Table 1
Mini
Power
Rating
UPS Battery Weigh
tBritish
Battery
Type
Voltage
(VAC)
Output Safety
Series Cabinet Cabinet (Com- Ther-
mal
Protec-
tion
Approv-
als
Dimensions Dimensions bined) Unit
KVA/
KW WHDWHD(lbs) BTU’sInput Output
0.35 24” 26” 16” Not required 340 11.9 Sealed, Select Select Input and UL924
0.525 24” 26” 16” Not required 340 17.85 Maintenance 120, 120, Output UL1778
0.7 24” 26” 16” Not required 370 23.8 Free (AGM) 208, 208, Circuit NFPA 101
(Consult 0.75 24” 26” 16” Not required 370 25.5 Lead 240, 277, Breakers NFPA 70
Factory 0.875 24” 26” 16” Not required 370 29.75 Calcium 277, 480, standard NEC
For others) 1.05 24” 26” 16” Not required 440 35.7 Or 120/240
1.4 24” 26” 16” Not required 460 47.6 480 Or
2.0 24” 26” 16” Not required 600 68 120/277

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 18 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020
complete self diagnostic capabilities and LCD Monitoring
lighted environment prior to an emer-
gency. The three phase power supplies are able to do a 5 minute battery run the first of every
month except for New Year’s day when the test is for 90 minute. The testing can be enabled by
going to the Autorun screen and selecting Yes or No with the Menu Forward or Menu Reverse but-
ton. When the battery test happens the rectifier is turned off, and the batteries will sustain the load
on the output. If the voltage dips too low the test is terminated prematurely, and a entry is record-
ed in the alarm log accordingly. Two minutes into the battery run test the voltage, power date, and
time are logged in the battery log. This is a feature that is standard in our 3-phase power supplies.
Water Dots are placed on every shelf and door panel to indicate if moisture is present or has got
inside the unit. The Dots are originally white in color but will turn red when water is absorbed.

Forced air cooling for maximum reliability




ECM - Environmental Circuit Module allows fixtures and lamps on the emergency circuit (s) to be
operated by normal switching and/or dimming devices in NON-emergency conditions
Dimming Panel Interface allows use with emergency lights




Maintenance contracts available

1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 19 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020


1.877.377.6769
Fax: [phone]
Title: Mini
Doc No.: 074-1001-AEC Rev: NR Page#: - 20 -
Description: Lighting Inverter Maintenance Manual Date: 05/28/2020
Factory-trained personnel should perform maintenance only. Factory training is available. Training can be
done on-site, over the phone or at the factory. Various maintenance contracts are available; please contact
“Customer Service” for more details.
 














