DT Research DT390MD Assembly instructions

DT390MD
ENGLISH
Medical
Mobile POS Tablet
BASIC OPERATION GUIDE
DT390MD
ENGLISH 8
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2012, DT Research, Inc. All Rights Reserved.
DT Research is a registered trademark of DT Research, Inc.
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of mobile tablets—the
DT390MD. Featuring an IP64-rated, slim yet robust enclosure, the two-pound DT390MD
with 8.9”TFT display is powered by the Intel®Atom™ processor, offering opmal
combinaons of performance and power savings. An external baery expansion opon
provides approximately 3-4 hours of addional baery operaon for up to eight hours
of mobile usage.
The DT390MD is available with Windows®Embedded Standard 7, Windows®XP
Embedded, Windows®XP Pro for Embedded Systems, Windows®7 Pro or Linux operang
systems. Each soware operang system features web browser, client/server compung
soware, media player, accessories, and applicaons support.
PACKAGE CONTENTS
DT390MD with Internal Baery Pack, Stylus and Bumpers•
AC-DC Power Adapter with Power Cord•
Basic Operaon Guide•
Handstrap•
Major opons, depending on configuraon:
Desktop Charging Cradle with DC-in Power Jack and Ethernet/ USB Ports•
X-handstrap•
External External Baery Pack and Baery Charger Kit•
Vehicle/ Wall Mount Cradle•
* If your DT390MD contains MSR, half-slot smart card reader, RFID reader, camera, 3G or scanner
module, please refer to the POS module operaon guide for detailed operaon.
BOG030612DT390MDENG
SPECIFICATIONS
System
Processor Intel® Atom™ Z530, 1.6GHz
Memory (RAM) 2GB DDR2 533MHZ
Storage 2GB to 32GB Flash
Operang Systems
Microso® Windows® Embedded Standard 7, Windows® 7
Professional, Windows® XP Embedded; Windows® XP Pro
for Embedded Systems, or Linux
Display 8.9”LED-backlight screen with resisve touch; sunlight-
readable LCD opon
Display Resoluon 1024 x 600 (WSVGA)
Network Interface Wi-Fi 802.11a/b/g/n, Bluetooth 2.1 with EDR
Trusted Plaorm Module Yes, TPM 1.2 support
Control Switch and Buons 1 power buon, 7 front buons and 1 trigger buon
Indicator 1 power/ baery status LED and 1 WLAN acve LED
Speaker/Microphone Built-in speaker; built-in internal microphone
Input/Output Ports 1 DC-in Jack; 1 USB 2.0 ports; 1 Headphone-out Jack
combined with microphone, 1 Full Slot Smart Card Reader
Full Slot Smart Card Reader Reads ISO 7816 T=0, T=1; EMV 2000 certified, 1.8/3/5V
smart card
Power
AC/DC Adapter Input: 100 – 240V AC; Output: 18.5V DC, 3.89A
Baery Pack Internal 7.4V, 3760mAh/
Oponal: External 7.4V, 3760mAh/ 7.2V, 3900mAh
Mechanical
Enclosure ABS + PC plascs
Stylus Non-electronic p
Protecve Bumpers Rubber bumpers on each corner for handling protecon
Dimensions (H x W x D) 7.7 x 10 x 1.25 in/ 196 x 256 x 32 mm
Weight 2.43 lbs/ 1.1 kg
Environmental
Water and Dust Resistance IP64 * IP64 rang may not be applicable for units with MSR or Smart
Card Reader module opons
Vibraon and Shock Resistance MIL-STD-810G
Regulatory FCC Class B, CE, C-Tick, RoHS compliant
Temperature Operaon: -20°C - 40°C
Storage: -20°C - 60°C
Humidity 0% - 90% non-condensing
* Specificaons subject to change without noce.

DT390MD
ENGLISH 2
Buon Funcons (with Windows XP Operang System)
BUTTON ACTION
Programmable
Programmable, launch so(on-screen) keyboard (default)
Launch SAS (Secure Aenon Sequence)
Generate Ctrl+Alt+Del keys to invoke the security windows defined under Windows XP
Programmable,
Calibrate touch screen before log on the operang system
Change display orientaon (portrait/ landscape) (default)
Programmable, system ulity menu (default)
Programmable,
As scanner trigger when equipped with the scanner module
Power on,
Push/release typically enters Standby mode, or Push/release exits Standby mode or
restarts device (soware dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
The DT390MD (with Windows XP Operang System)
Baery/Power LED
Wireless LEDMicrophone
Stylus
Buon Management
Wireless Network Sengs
Calibraon
1
8
9
2 3
4
5
6
8
9
7
Input/ Output Ports
Headphone Jack
USB Port
DC Power Input
Full Slot Smart Card Reader
A
C
D
B
A
B
C
D
1 2 3 4 5 6 7
Baery and Power Meter
3ENGLISH
Power/Baery LED Status:
Blue indicates the baery is 25% to 100% charged•
Blinking blue indicates the baery is charging•
Orange indicates that the baery is between 11% to 25%•
Blinking orange indicates that the baery is below 10%•
Precauons
Always exercise care when operang and handling the DT390MD.
•
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Stylus provided to keep the screen clean.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
•
possible, the DT390MD should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the device, do NOT use any
•
AC-DC adapter other than the one provided with the device or acquired from the
manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power offthe DT390MD and disconnect all power sources. Report the
problem to your device provider immediately.
Never aempt to disassemble the DT390MD, as this will void the warranty.
•
Basic Features
The DT390MD wireless tablet integrates a bright and responsive touch display, 1 USB
port, and embedded networking elements such as wireless LAN or oponal 3G. The
primary device is complemented by a suite of accessories, including baery expansion,
docking cradles, and wall/ vehicle mount cradles, for a comprehensive user experience.
A DT390MD typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that
may connect to other wireless devices or access points. If your DT390MD does not
come with such a network adapter, please consult your device provider to establish the
desired network connecvity.

DT390MD
ENGLISH 45ENGLISH
OPERATION
Internal Baery
Warning!
The Internal baery pack should only be replaced by an authorized DT Research service
representave. Please contact your product and/or service provider for internal baery
replacement service.
Powering ON and OFF
To acvate the DT390MD, push and quickly release the Power Buon. The display will
come on in a few seconds. To put the DT390MD in Standby mode, push and quickly
release the Power Buon. To turn the DT390MD offfor extended storage, power offthe
device safely using any soware funcon that “shuts down computer”provided in the
soware operang system.
NOTE: The baery packs shipped with your device may be low in power—please use
the AC-DC adapter with the DT390MD when seng up the device for the first me to
fully charge the internal baery pack. You may charge the external baery pack with it
aached to the DT390MD, or with the oponal external baery charger kit.
NOTE: When the baery pack(s) is (are) charging, the blue-colored Baery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity
and the LED stays dark, the baery pack(s) may have been drained substanally. Try
unplugging/ replugging the AC-DC adapter to the DT390MD a few mes to acvate the
charging process.
NOTE: To conserve power, use (push and quick release) the Power Buon to put the
device in “Standby”mode while not in use. Pushing briefly on the same buon will wake
up the system within seconds.
NOTE: Avoid using the Power Buon (“hold 4+ seconds”feature) to turn offthe
device—this form of hardware shutdown is intended to be a means of recovery from
device lockups, and not as normal operaon.
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will
be displayed aer a launch sequence of several seconds. The wireless LAN connecon
may take 10-15 seconds to be established.
Configuring the DT390MD
The device may be configured using the ulies and methods dictated by the soware
operang system. The DT390MD should be configurable for various properes such as
user profiles, network features, and several system elements.
Calibraon
The touch display for the DT390MD is calibrated before shipping. In the event that the
calibraon has been modified or is unsasfactory, the respecve calibraon rounes
(e.g., PenMount (PM) for Windows XP) to calibrate the touch interface may be used.
Such applicaons are typically executed through touch input via Stylus or through mouse
click via a USB mouse.
Wireless Networking
Wireless LAN
The DT390MD is oen delivered with an embedded (user-inaccessible) 802.11a/b/g/n
WLAN adapter equipped with a hidden custom antenna.
T
•hrough the support of typical WLAN adapters, the DT390MD should be able to
detect all 802.11 access points in the vicinity for you to select the access point of
your choice for connecon.
T
•he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT390MD and the
access points have to match. The SSID is case-sensive and it is recommended
that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure
access.
W
•hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
sengs such as Authencaon mode, etc.
R
•efer to the access point operang manuals for seng up the 802.11 access points.
!

DT390MD
ENGLISH 6
Buon Management
Where supported by soware, many of the hard buons on the DT390MD are
programmable to perform a funcon of the user’s choice. The excepon is the Power
Buon and the SAS Buon. To acvate the buon re-assignment applicaon, invoke the
Buon Manager applicaon, e.g., in Windows XP Embedded .
Brightness Control
Where supported by device firmware and soware, a hard buon may be engaged to
manipulate the display brightness. Press the System Ulity Menu buon (Buon 7) on
the front of the DT390MD. The System screen will display a Brightness control secon
with up and down arrows that can be acvated with the stylus.
Baery and Power Management
The DT390MD is equipped with an internal 3760mAh Li-Ion baery pack that is capable
of supporng approximately 3 - 4 hours of connuous operaon. With the internal
baery and an external baery pack that clips (hot-pluggable) onto the back of the
device, the maximum period of connuous operaon will be approximately 6 - 8 hours.
The period between baery recharges can be significantly lengthened by pung the
device into Standby mode through the Power Buon (see Buons Funcon Table)
whenever the device is not in use. Depending on the operang soware, the DT390MD
may also be configured to enter various power-saving modes via the Power Buon or
through med entry.
Full Slot Smart Card Reader
The DT390MD comes with a full slot smart card reader.
Remove the rubber and insert a card (Picture 1).•
Use the stylus to pull the metal pull and then remove the card (Picture 2).•
(Picture 1) (Picture 2)
7ENGLISH
USING THE DT390MD
Memory & Storage Configuraon
The DT390MD is available with 2GB memory configuraon. Storage opons currently
range from 2GB to 32GB flash memory.
Peripherals Support
Through its USB port, the DT390MD supports a wide range of USB-based peripherals.
These peripherals are applicable for soware installaon, applicaons storage, data
storage, docking or soware recovery and update.
The DT390MD is complemented by an oponal Desktop Cradle or Wall/ Vehicle Mount
Cradle for support, pass-through charging, and connecon to a range of USB peripherals,
including keyboard and mouse. The Cradles offer the following interfaces: a DC-in port
for the AC-DC adapter, an Ethernet port, a VGA output and USB ports. Always seat the
DT390MD securely onto the cradle. The cradle must be powered by the AC-DC adapter
for the Ethernet and USB ports to funcon. The baery packs on the DT390MD may be
recharged by connecng the AC-DC adapter directly to the DC-in port on the DT390MD
or through the DC-in port on the Cradle while the DT390MD is docked.
For More Support
Users can download the Soware Ulity and Modules Operaon Guides from the DT
Research website.
If the DT390MD comes with a 3G module, please contact your product and/or service
provider for the SIM Card Slot Locaon and Inseron Guide.