DT Research 316T/MD Assembly instructions

Medical Tablet
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2021, DT Research, Inc. All Rights Reserved. BOG121021 316T/MD C ENG
INTRODUCTION
Thank you for acquiring the 316T/MD, part of DT Research’s line of medical tablets.
Featuring a slim, robust enclosure, the 316T/MD with a 15.6” TFT display is powered
by the Intel® processor, offering opmal combinaons of performance and power
savings.
The 316T/MD is available with Microso® Windows® or Ubuntu operang system.
Each soware operang system features web browser, client/ server compung
soware, media player, accessories, and applicaons support.
PACKAGE CONTENTS
• One 316T/MD with Baery Pack and Handstrap
• AC-DC Power Adapter with Power Cord
• Basic Operaon Guide
316T/MD

2 3
PRECAUTIONS
• Always exercise care when operang and handling the 316T/MD.
• Do NOT apply excessive pressure to the display screen.
•We recommend using the Digital Pen (oponal) to keep the screen clean.
• Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the 316T/MD should face away from direct light to reduce
glare.
• If the AC-DC power adapter is used to recharge or power the tablet, do NOT use
any AC-DC adapter other than the one provided or acquired from the manufac-
turer or its partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power off the 316T/MD and disconnect all power sources. Report
the problem to your device provider immediately.
• Never aempt to disassemble the 316T/MD, as this will void the warranty.
BASIC FEATURES
The 316T/MD wireless tablet integrates a bright and multi-touch display, one USB
port, and embedded networking elements such as wireless LAN. The 316T/MD is
complemented by a suite of accessories, including battery expansion, charging
cradles, and battery charger kit, for a comprehensive user experience.
A 316T/MD typically integrates an 802.11ax wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your 316T/MD does not come
with such a network adapter, please consult your device provider to establish the
desired network connecvity.
Power/Battery LED Status:
• Blue indicates the baery is 25% to 100% charged
• Blinking blue indicates the baery is charging
• Orange indicates that the baery is between 11% to 25%
• Blinking Orange indicates that the baery is below 10%
Button Functions
BUTTON ACTION
Programmable Buon
Power Buon
Baery Latch
Input/ Output Ports
USB 3.0 Port
Headphone-out
Ethernet Port
USB Type-C Port
DC-in
1
2
3
A
B
C
D
E
Baery/Power LED
1
2
3
A
B
C
A
D
E

Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed aer a launch sequence of several seconds. The wireless
LAN connecon may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The 316T/MD may be congured using the ulies and methods dictated by
the soware operang system. The 316T/MD should be congurable for various
properes such as user proles, network features, and several system elements.
Wireless Networking
Wireless LAN
The 316T/MD is oen delivered with an embedded (user-inaccessible) 802.11ax
WLAN adapter equipped with a hidden custom antenna.
•Through the support of typical WLAN adapters, the 316T/MD should be able to
detect all 802.11 access points in the vicinity for you to select the access point of
your choice for connecon.
•The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 316T/MD and the
access points have to match. The SSID is case-sensive and it is recommended
that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for
secure access.
•When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly congure
associated sengs such as Authencaon mode, etc.
•Refer to the access point operang manuals for seng up the 802.11 access
points.
OPERATION
Powering ON and OFF
To acvate the 316T/MD, push and quickly release the Power Buon. The display will
come on in a few seconds. To put the 316T/MD in Standby mode, push and quickly
release the Power Buon. To turn the 316T/MD off for extended storage, power
off safely using any soware funcon that “shuts down computer” provided in the
soware operang system.
NOTE:
The baery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the 316T/MD when seng up for the rst me to fully
charge the internal baery pack. You may charge the external baery pack with
it aached to the 316T/MD, or with the oponal external baery charger kit.
NOTE:
When the baerypack is charging, the blue-colored Baery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity
and the LED stays dark, the baery pack may have been drained substanally.
Try unplugging/ replugging the AC-DC adapter to the 316T/MD a few mes to
acvate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby” mode while not in use. Pushing briey on the same buon
will wake up the system within seconds.
NOTE:
Avoid using the Power Buon (“hold 4+ seconds” feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operaon.
45

USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the 316T/MD supports a wide range of USB-based peripherals.
These peripherals are applicable for soware installaon, applicaons storage, data
storage, and system soware recovery and updates.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT
Research website.
67
To Hold the Tablet
Le hand: grip the le back side of the tablet
with your le hand four index ngers, with
thumb resng on the top of the back side of the
tablet and palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index ngers, with
thumb resng on the top of the back side of the
tablet and palm securely against the back.
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in
a residenal installaon. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modicaons not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in
conjuncon with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.