Dunlop Authentic Hendrix ’69 Psych Series User manual

jimdunlop.com/jhw1
AUTHENTIC
HENDRIX™
’6 9 P S YCH
SERIES FUZZ
FACE®

JHW1 | AUTHENTIC HENDRIX™'69 PSYCH SERIES FUZZ FACE®DISTORTION 2
This pedal combines the two different
avors of Fuzz Face Distortion tones
that Jimi Hendrix used throughout
his career—aggressive silicon-based
crunch and smooth germanium-
based saturation—all in a mini MXR
housing emblazoned with the trippy,
kaleidoscopic designs of award-winning
UK-based design crüe ILOVEDUST.

JHW1 | AUTHENTIC HENDRIX™'69 PSYCH SERIES FUZZ FACE®DISTORTION 3
1BUFF switch toggles between high/low input impedance
2VOLUME knob sets overall volume of effect
3SI/GE switch toggles between silicon (white LED)/germanium (blue LED) fuzz styles
4FUZZ knob controls intensity of fuzz effect
5FOOTSWITCH toggles effect on/bypass (blue LED indicates on)
1
24
3
5
External Controls

JHW1 | AUTHENTIC HENDRIX™'69 PSYCH SERIES FUZZ FACE®DISTORTION 4
Basic Operation
1 Run a cable from your guitar to JHW1’s INPUT jack and another
cable from JHW1’s OUTPUT jack to your amplifier.
2Start with VOLUME and FUZZ controls at 12 o’clock.
3 For aggressive silicon-based crunch, set the SI/GE switch
to its OUT position, indicated by the white LED. For smooth
germanium-based saturation, set the SI/GE switch to its IN
position, indicated by blue LED.
4Turn effect on by depressing the footswitch.
5Rotate VOLUME knob clockwise to increase overall volume or
counterclockwise to decrease it.
6Rotate FUZZ knob clockwise to increase the amount of fuzz or
counterclockwise to decrease it.
7To prevent oscillation when using a wah pedal and preserve high
end tone, this pedal's buffer is set to ON by default, indicated by
the associated LED. To disable the buffer, set the BUFF switch to
its IN position.
The Authentic Hendrix™’69 Psych Series Fuzz Face®
Distortion is powered by the Dunlop ECB003 9-volt adapter
or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™power
supplies. This pedal cannot be powered by a battery.
Power
Directions

JHW1 | AUTHENTIC HENDRIX™'69 PSYCH SERIES FUZZ FACE®DISTORTION 5
Specifications
Current Draw 6.8 mA
Power Requirements 9 volts DC
Input Impedance 800 kΩ
Output Impedance
Max Volume 16 kΩ
Mid Volume 160 kΩ
Max Output Level -4 dBV
Max Gain 55 dB
Bypass True Hardwire
Input Impedance 10 kΩInput Impedance 10 kΩ
Output Impedance Output Impedance
Max Volume <16 kΩMax Volume 2 kΩ
Mid Volume 66 kΩMid Volume 115 kΩ
Max Gain 55 dB Max Gain 45 dB
Bypass True Hardwire Bypass True Hardwire
SILICON / GERMANIUM FUZZ (BUFF ON)
SILICON FUZZ (BUFF OFF) GERMANIUM FUZZ (BUFF OFF)
POWER REQUIREMENTS
* All specifications made at 1 kHz