Dunlop MXR M101 PHASE 90 User manual

92503016096 revB
M101 PHASE 90

SAMPLE SETTINGS
M101 PHASE 90
CLASSIC 80’s
ROCK
YOUR SETTING
PSEUDO LESLIE
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: [phone] FAX: [phone]
CONTROLS
SPEED knob controls
overall effect rate
FOOTSWITCH toggles effect on/
bypass (red LED indicates on)
POWER
The MXR Phase 90 is powered
by one 9-volt battery (remove
bottom plate to install), a 9-volt
AC Adapter such as the Dunlop
ECB003/ECB003EU or a DC Brick™
power supply.
DESCRIPTION
• Add’s shimmery velocity to
lead licks and a thick
swoosh to chords
• Works well with bass, keyboards
and even vocals
• True bypass
DIRECTIONS
• Run a cable from your guitar
to the Phase 90’s INPUT jack
and run another cable from the
Phase 90’s OUTPUT jack to
your amplier.
• Start with the SPEED control
at 12 o’clock.
• Turn the effect on by depressing
the footswitch.
• Rotate the SPEED knob
clockwise for a faster phase
effect or counterclockwise
for a slower phase effect.
SPECIFICATIONS
Input Impedance 1 MΩ
Output Impedance 10 kΩ
Nominal Intput Level -20 dBV
Nominal Output Level -20 dBV
Noise Floor* -96 dBV
Bypass True Hardwire
Current Draw 5 mA
Power Supply 9 volts DC
*A-weighted