Operating instruction DUOMATIC 50 A
The DUOMATIC 50 A timer is compatible
with all standard switch programmes with
50mm x 50mm cutouts (in accordance with
DIN 49075).
Reset Mode
ATTENTION!
This appliance is not intended for use by
person (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Wiring diagram
Technical appliances data
Nom. operating voltage: 230V / 50 Hz
Switching voltage: 250V AC
Switching contact load: 3A (cos phi=1)
Temperature range
:
-5°C to +45°C
Travel time: 2,5 min.
Switching delay: min. 0,5 sec.
Accuracy: < 5 sec./day
Reserve power: min. 1 hrs.
Degree of protection: IP20
Safety class: II
Conformity: CE
Operating the timer
DOWN button < 1 sec. Inching mode; or STOP when motor running
DOWN button > 1 sec. DOWN command 2,5 min.
UP button < 1 sec. Inching mode; or STOP when motor running
UP button > 1 sec. UP command 2,5 min.
Mode button > 2 sec. Activating the programming mode
Mode button < 2 sec. Changing the operating mode (manual mode;
automatic; random automatic)
Reset button Initialising the appliance (new start); appliance is
reset to the factory settings
Attention: when the timer is switched on for the first time, or after a long
interruption to the power supply, the timer can only be operated after internal
tests are ended (approx. 10 s.).
Programming the timer
Press the Mode button
> 2 sec. Time blinks. After new initialising and RESET the
factory setting blinks (=> 12:00h).
Set the time with the
UP or DOWN buttons As soon as the UP or DOWN button is pressed
the display stops blinking. If the UP or DOWN
button is held the time display accelerates up to
half-hour steps.
Confirm with the Mode
button Current UP time is displayed. UP arrow blinks.
After new initialising: factory setting UP time
(=> 07:00h).
Set the UP time with
the UP or DOWN
buttons
If the UP or DOWN button is held the time display
accelerates up to half-hour steps. UP arrow
blinks.
Confirm with the Mode
button Current DOWN time is displayed. DOWN arrow
blinks. After new initialising: factory setting DOWN
time (=> 21:00h)
Set the DOWN time
with the UP or DOWN
buttons
If the UP or DOWN button is held the time display
accelerates up to half-hour steps. DOWN arrow
blinks.
Confirm with the Mode
button Exit from programming mode; time and selected
mode are displayed.
Factory settings
If the RESET button is pressed all values return to the factory settings:
Daily programme: UP 07:00h, DOWN 21:00h
Time: 12:00h
Function mode: man
Possible function modes
Pressing the Mode button switches through all possible function modes
successively. You can select from 3 modes:
man Manual control
auto Automatic (daily programme)
Automatic (daily programme) + random generator
In the automatic mode the shutters are raised or lowered automatically at
the programmed times.
Inching mode
Touch the direction buttons (about 1 sec.) to slant the blind slats. The
system remains in the Automatic mode.
Random generator
If the random generator is activated the programmed UP and DOWN times
are moved back randomly by 1 - 31 minutes.
ATTENTION! Work on the 230V supply may only be carried out by a certified electrician!
Terminal
Motor
