Duronic PS712 User manual

PS712 - Shredder
PLEASE READ ALL THE INSTRUCTIONS BEFORE USE

English Manual
Manuel d’utilisation en français
Gebrauchsanleitung auf Deutsch
Manual de Instrucciones en Español
Manuale D’istruzioni In Italiano
Instrukcja obsługi. Polski
4
14
24
34
44
54
Contents

4
English Manual

5
Specications
Safety Instructions
Warning Icons
Cleaning and Maintenance
Setup
Operation
Special Features
Capacity
Paper Jams & Overloads
Warranty
6
7
9
9
10
10
11
11
11
13
Contents

6
Specications
Shred Type: Cross-Cut
Shred Size: 40mm x 4mm
Shredding Capacity: 5 Sheets of paper (80gsm A4)
Duty Cycles: 2 min on / 45 min off
Feed Opening: 220mm / 22cm
Dimensions: 320 x 310 x 190 mm
Bin Size: 12 Litre
Weight: 4.0kg
Power: 200W
Input: 220 - 240V, 50-60Hz, 2.4A

7
Safety Information
Please read these instructions fully and keep for future reference.
• Dispose of all packaging carefully and responsibly.
• This appliance is designed for indoor use only. Do not use outdoors.
• Do not use this shredder for industrial and commercial use, or any
other purpose.
• The shredder MUST be positioned on a rm level base before and
during use.
• Ensure the power cable is not caught under the appliance.
• Ensure the correct power supply is used (220-240V AC).
• Keep the power cable away from hot surfaces.
• Do not place the shredder near a heat source or in direct sunlight.
• Do not operate under or near curtains or other combustible materials.
• Do not immerse the machine in water or any other liquid to protect
against electric shock.
• Do not spray any ammable synthetic oil, petroleum-based or aerosol
products onto this shredder as it may cause a re.
• Do not allow the shredder to be exposed to rain or any other moisture.
• Do not attempt to repair the shredder by yourself. If for any reason
your shredder stops working properly, contact Duronic Customer Care
Team for advice.
Before Use

8
• WARNING! Keep loose articles of clothing; ties, jewellery, hair or other
objects away from the feed opening in order to prevent injury.
• Never insert ngers into the feed opening. Serious injury may result!
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
• DO NOT leave children unattended with the shredder.
• ALWAYS keep the shredder off and unplugged when not in use.
• DO NOT attempt to feed more sheets of paper into the feeder than
specifed.
• ALWAYS limit continuous shredding to the specifed time as suggested
in the instruction manual. See section titled ‘Capacity’.
• DO NOT attempt to shred materials other than paper and credit cards
in the provided feed slots.
• To avoid overheating the shredder, limit continuous shredding to the
specifed time as suggested in this instruction manual.
• Do not operate the shredder if the cable or plug are damaged or if the
shredder has malfunctioned in any way.
• ALWAYS unplug the shredder when moving, cleaning or emptying the
waste basket.
• DO NOT attempt to operate the shredder if the shredder is
experiencing any kind of problem.
• If your machine stops working, do not attempt to repair it yourself!
Contact Duronic (Shine-Mart) for assistance.
During Use

9
Warning Icons
Cleaning and Maintenance
Please take note of these warnings displayed on the machine:
• Never use any sharp instruments or abrasive substances, soap,
household cleaner, detergent or wax polish for cleaning.
• Never clean the appliance with ammable fuids. It could cause a damage
and re hazard.
• Use lukewarm water on a cloth to clean the cabinet and waste basket of
the appliance and wipe it dry.
• Ensure the unit is dry before connecting to the mains.
IMPORTANT: Always unplug the appliance from the power socket
during cleaning and maintenance.
WARNING
NO CHILDREN NO AEROSOL
PRODUCTS
NO
PAPERCLIPS
MAX 5
SHEETS
READ
INSTRUCTIONS
BEFORE USE
NO FINGERS
OR HANDS
NO HAIR NO LOOSE
CLOTHING

10
Setup
Operation
1. Carefully place the PS712 shredder on a dry, at, level surface.
2. Place the shredder head into the top of the waste bin.
3. Be careful not to place your ngers near the cutter blades.
4. Plug the power cord into any standard 220-240-Volt AC mains outlet / plug
socket which shall should be located near the equipment and should be
easily accessible.
5. Place the switch into the AUTO position.
You are now ready to start shredding.
The power switch is located on the top of the shredder. The switch has four
settings: Forward/FWD, AUTO, OFF, Reverse/REV.
When AUTO is selected, the shredding process is started automatically by
inserting paper into the feed opening. The shredder will also stop automatically
when the paper has completed its travel through the feed opening.
REV mode is used to assist in the removal of a paper jam. This reverses the
shredding process before the cycle nished, thus clearing the cutters.
FWD mode is also used to assist in the removal of a paper jam. By selecting
this mode, the machine’s blades will keep rotating continuously even if no
paper is inserted. This will help clear the blades and remove any remaining
pieces of paper from the blades.
Select the OFF mode when emptying the waste bin or when the shredder is
not in use for a long period of time.