DutchWest NC Assembly instructions

Dutchwest NC Wood Stove Service

Dutchwest Non-Catalytic Interior
Fireback Service
Upper and
lower fireback
refractories
removed from
the stove

Fountain and Shoe
Fountain and
Shoe shown out
of the stove.
Front view of
Fountain and
Top view of Shoe

Remove Andirons
Lift the left and right andirons out of the inner bottom

Remove Grate
Lift up grate and remove. Notice the retainer on the
rear top of the grate which holds the Shoe in place.

Right End Refractory
With a Phillips
screwdriver,
remove the
brick support
bracket and
the right end
Refractory.
Then
insulation
panel can be
removed.

Remove Shoe
Grip the front
of the shoe
and carefully
pull it forward
out of the
opening of
the lower
fireback
refractory

Remove Lower Load Door Refractory
Lift out the lower
load door
refractory which
sits on the inner
bottom against
the left side

Remove Rear Sheet Metal Shroud
Remove the rear
sheet metal shroud.
It is held in place with
two Phillips head
bolts located in the
center of the shroud
below the flue collar.Rear of stove with shroud
removed

Remove Fireback Retainer
With 7/16”
socket wrench,
remove the
two interior
bolts with
washers &
nuts on
exterior back
of stove then
lift out fireback
retainer

Remove Lower Retainers
With a 7/16” socket
wrench, remove the
interior bolts with
washer and nut on
the exterior back of
the stove for left
and right lower
retainer. Lift out
the retainers. Make
sure refractories do
not fall forward.

Remove Upper Fireback Refractory
Lift up and
out to remove
the upper
fireback
refractory.
Do not let
the lower
fireback
refractory fall
forward.

Remove Lower Fireback Refractory
Pull forward
to remove
the Lower
Fireback
Refractory.

Remove Fountain
Reach to the
back of the
fountain and
gently pull it
forward and
out of the box.
The fountain
is fragile so
handle with
care.