DVDO DVDO-Splitter-14-SE User manual

DVDO-Splitter-14-SE
1x4 HDMI 2.0 18Gbps Splitter
with Scaler / Audio Extraction
Version 1.0.0
User Manual

1
Thank you for purchasing this product
For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may
be damaged by electrical spikes, surges, electric shock, lighting
strikes, etc. Use of surge protection systems is highly
recommended in order to protect and extend the life of your
equipment.

2
Table of Contents
1. Introduction.................................................................... 3
2. Features.......................................................................... 3
3. Package Contents ............................................................ 4
4. Specifications .................................................................. 5
5.Operation Controls and Functions..................................... 7
5.1 Front Panel............................................................. 7
5.2 Rear Panel.............................................................. 9
6. Application Example...................................................... 10

3
1. Introduction
The 1x4 HDMI 2.0 Splitter simultaneously routes one HDMI
source to four HDMI displays. It supports resolutions up to
4K2K@60Hz (4:4:4) and HDCP 2.2. This product supports audio
extraction from HDMI source to optical and analog outputs. It
can select COPY, AUTO modes for EDID setting. Output
supports bypass and downscaling (4K->1080P) function.
2. Features
☆ HDMI 2.0b, HDCP2.2/HDCP1.4 compliant.
☆ Supports HDMI resolutions up to 4K2K@50/60Hz (4:4:4)
☆ Supports digital and analog audio extraction output from
HDMI source.
☆ Supports output bypass and 4K->1080P downscaling
function via dial switch on panel.
☆ EDID can be selected to COPY and AUTO modes.

4
(COPY: Copies OUT 1 port EDID setting to all output ports,
If no HDMI OUT 1 EDID is detected then the unit will copy
HDMI OUT 2. If no HDMI OUT 1 and 2 EDID is detected
then the unit will copy HDMI OUT 3, etc. The priority
order is OUT 1 to OUT 4.
AUTO: Compare OUT 1~OUT 4 EDID settings and output
the best resolution to all outputs.)
☆ Supports analog audio PCM 2.0.
☆ Supports optical audio pass-through format LPCM
2.0/2.1/5.1CH, Dolby 5.1, Dolby True HD, Dolby DD+, DTS
5.1, DTS-ES 6/DTS-HDMA 5.1, DTS HD-HRA 5.1.
3. Package Contents
① 1× 1×4 HDMI 2.0 Splitter
② 1× 5V/1A Power Adapter
③ 1× User Manual

8
transmit the best EDID signal to source device,
the source device will transmit again the EDID
signal to all outputs.
• COPY: Copy the HDMI OUT 1 port EDID
setting to source device (If no HDMI OUT 1
capable EDID is detected then the unit will
copy HDMI OUT 2. If no HDMI OUT 1~2
capable EDID is detected then the unit will
copy HDMI OUT 3, etc. The priority order is
OUT 1 to OUT 4).
6
Dial switch
(4K→
1080P)
OFF: When the dial switch is dialed to‘OFF’
position, signal input and output is bypass
status.
ON: When the dial switch is dialed to‘ON’
position, signal input will downscale
(4k->1080P ) output.