DW DWC-HC421D User manual

ABOUT MANUAL
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
HD-SDI Box Camera
DWC-HC421D
06152012

2
PRECAUTIONS
Do not open or modify.
Do not open the case except during maintenence and installation,
for it may be dangerous and can cause damages.
Do not put objects into the unit.
Keep metal objects and flammable substances from entering the camera.
It can cause fire, short-circuits, or other damages.
Be careful when handling the unit.
To prevent damages, do not drop the camera or subject it to shock or vibration.
Do not install near electric or magnetic fields.
Protect from humidity and dust.
Protect from high temperature.
Be careful when installing near the ceiling of kitchen or a boiler room,
as the temperature may rise to high levels.
Cleaning:
To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
Mounting Surface:
The material of the mounting surface must be strong enough to support the camera.
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference. when the equipment is operated in a residential environment. This
equipment generates, uses, and radiates radio frequency energy; and if it is not installed and used in
accordance with the instruction manual, it may cause harmful interference to radio communications.
WARNING: Changes or modifications are not expressly approved by the manufacturer.

3
TABLE OF CONTENTS
Introduction
Installation
Module OSD Menu
Troubleshooting
Warranty Information
Specifications
Features
Parts and Descriptions
Dimensions
Inside the Box
Installation Instructions
Controlling the Camera’s OSD Menu Remotely 12
Lens Connections
4
5
6
7
8-9
10-11
13-25
26
27-28
29-30

4
FEATURES*
Sony 1/2.8” CMOS Sensor
Highest Resolution 2.1 Megapixels
720P / 1080P Mode Selectable
Double Shutter WDR (Wide Dynamic Range) at 15fps
Electronic Day and Night
AGC / BLC / AWB
3D DNR (3D Digital Noise Reduction)
D-Zoom (0~112 level)
HME/ HLMSK (Highlight Masking Exposure)
Mirror & Flip Image
Programmable Privacy Zone (30) & Motion Detection
Dead Pixel Cancellation
12VDC Support Only
Secondary Video-BNC Output

TDN V Mega (CCTV)
CS Ring (Lens Conector)
Box Camera
Mounting Attachment
Iris Jack
OSD Control Arrows and Enter
Buttons
Alarm +/-
RS485 Connector
Video Out
BNC Jack (HD-SDI)
DC Power Input
Rear Name Plate
5
PARTS & DESCRIPTION*
1
2
3
8
9
10
12
11
4
5
6
7
6
10
7
9
12
8
1
2
5
4
3
6
10
7
9
12
11

62.0
(2.44”)
55.0
(2.17”)
6
DIMENSIONS IN MILLIMETERS (IN)*
7.0
4.0 34.7
13.7
31.2

7
INSIDE THE BOX*
Included with Box Camera
1
2
5
7
6
5
7
6
3
4
Color Box
User Manual
Mini-DIN Connector (For Video or
DC Auto Iris Lens)
Adapter Ring for “C” Type Lenses
ABOUT MANUAL
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Box Camera
DWC-HC421D
06152012
Two-Port Terminal Block
Cable Extension for Alarm and RS485
L-Wrench
12
3
4

INSTALLATION*
Using an appropriate mounting bracket, mark and drill the
necessary holes to mount the bracket to a wall or ceiling.
Attach the mounting bracket to the surface using machine screws.
Attach the box camera to the mounting bracket.
Adjust the camera’s position. Consult the manual of the
mounting bracket for additional information.
1
2
3
4
8

INSTALLATION*
Connect an appropriate lens to the camera lens connector by twisting the lens clockwise.
The camera is compatible with any C or CS mount lens. For “C” lenses, please use the provided
Adapter Ring. See page 10 for details. *Lens is not included.
Connect the lens’ cable to the box’s A-Iris Socket.
Adjust the lens’ zoom and focus accordingly. Consult the manual of the lens for additional
information.
5
6
7
9

10
CONNECTIONS*
*BNC / TERMINAL If you are using an automatic iris lens with the camera, the lens has
to be connected to the A-Iris socket of the camera. If you are using
a lens with manual or fixed iris, this socket is not used.
Operation of the camera will be confirmed by the power LED at the
rear side of the camera.
*A-Iris Socket
DC Driven (DC)
1.control -
2.control +
3.drive +
4.GND
1
2
3
4
A-IRIS