DW MEGApix DWC-MBH2I4WV User manual

Before installing or operating the camera, please read and follow this manual carefully.
DWC-MBH2I4WV
MEGApix® Bullet Camera
08/18

PRECAUTIONS
Do not open or modify.
Do not open the case except during maintenance and installation, for it may be dangerous and can cause
damages.
Do not put objects into the unit.
Keep metal objects and flammable substances from entering the camera. It can cause fire, short-circuits, or other
damages.
Be careful when handling the unit.
To prevent damages, do not drop the camera or subject it to shock or vibration.
Do not install near electric or magnetic fields.
Protect the camera from humidity and dust.
Protect the camera from high temperature.
Be careful when installing near the ceiling of a kitchen or a boiler room, as the temperature may rise to high levels.
Cleaning: To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
Mounting Surface: The material of the mounting surface must be strong enough to support the camera.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference, when the equipment
is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy, and if it is
not installed and used in accordance with the instruction manual, it may cause harmful interference to radio
communications.
WARNING: Changes or modifications are not expressly approved by the manufacturer.
FCC COMPLIANCE
2

TABLE OF CONTENTS*
Introduction......................................................................................................................................................................4
Features.................................................................................................................................................................................................4
Parts .......................................................................................................................................................................................................5
Dimensions..........................................................................................................................................................................................6
Inside the Box ....................................................................................................................................................................................7
Installation........................................................................................................................................................................8
Network Connection ........................................................................................................................................................................8
Before Installation .............................................................................................................................................................................9
Installation ..........................................................................................................................................................................................10
MEGApix® 1080p™ Camera Setup................................................................................................................................11
Installing DW Desktop Tool™ ........................................................................................................................................................11
Using DW Desktop Tool™ ........................................................................................................................................................12-14
Network Options..............................................................................................................................................................................15
Camera Reboot.................................................................................................................................................................................16
MEGApix® 1080p™ Camera Web Viewer....................................................................................................................17
Accessing the Camera’s Web Viewer......................................................................................................................................17
GUI Description ...............................................................................................................................................................................18
First &Second Stream...................................................................................................................................................................19
MEGApix® 1080p™ Camera Setup..............................................................................................................................20
Local Configuration .....................................................................................................................................................................20
Basic >System Settings..........................................................................................................................................................21-23
Basic >Network Settings ......................................................................................................................................................24-26
Basic >Stream Settings .........................................................................................................................................................27-28
Basic >Image Settings ..........................................................................................................................................................29-32
Basic >Security ..............................................................................................................................................................................33
Advanced >Image ........................................................................................................................................................................34
Advances >Security ...............................................................................................................................................................35-38
Advanced >Basic Event .......................................................................................................................................................39-43
Specifications ..........................................................................................................................................................44-45
Troubleshooting .....................................................................................................................................................46-49
Warranty........................................................................................................................................................................50
Limits &Exclusions.......................................................................................................................................................51
3

1/3” CMOS Image Sensor
Real-time 2.1MP Resolution, 1080P at 30fps
Dual Codecs (H.264, MJPEG) with Simultaneous Streaming
4.0mm Fixed Lens
Smart IR™ with Intelligent Camera Sync. 100ft Range
Smart DNR™ 3D Digital Noise Reduction
Digital Wide Dynamic Range (DWDR)
True Day/Night Mechanical IR Cut Filter
Auto Gain Control (AGC)
Back Light Compensation (BLC)
Auto White Balance (AWB)
Programmable Privacy Zones
Motion Detection
Web Server Built-in
PoE and DC12V
OnVIF Compliant, Profile S
IP66 Certified (Weather Resistant)
FEATURES*
4

PARTS & DESCRIPTIONS*
5
No. Description No
.Description
1Mounting Base 4 Lens
2Back Box 5Sun Shield
3Front Box

DIMENSIONS*
6

The following items are included with the MEGApix® 1080p™ camera.
INSIDE THE BOX *
7
Drill Template
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
1
1
1
A
Mounting Template

There are two ways to power a MEGApix® 1080p™ camera.
Use a PoE-enabled switch to connect data and power through a single
cable to begin viewing and recording images instantly. A non-PoE switch
will require an adaptor for power transmission.
1. Using a PoE-Enabled Switch
The MEGApix® 1080p™ Camera is PoE-Compliant, allowing transmission of power and data via a
single Ethernet cable. PoE eliminates the need for the different cables used to power, record, or
control the camera. Follow the illustration below to connect the camera to a PoE-enabled switch
using an Ethernet cable.
2. Using 12VDC
If a PoE injector is not available, use a power adaptor for power transmission and a non-PoE switch
for data transmission. Follow the illustrations below to connect the camera without a PoE Injector.
NETWORK CONNECTION*
8

Make sure the device in the package is in good condition and all the assembly parts are
included.
The standard power supply is 12V DC, please make sure your power supply matches with
your camera.
Make sure all the related equipment is power-off during the installation.
Check the specification of the products for the installation environment.
Make sure that the wall is strong enough to withstand four times the weight of the camera and
the bracket.
For the camera that supports IR, you are required to pay attention to the following precautions
to prevent IR reflection:
Dust or grease on the dome cover will cause IR reflection. Please do not remove the dome
cover film until the installation is finished. If there is dust or grease on the dome cover, clean
the dome cover with clean soft cloth and isopropyl alcohol.
Make sure that there is no reflective surface too close to the camera lens. The IR light from
the camera may reflect back into the lens causing reflection.
The foam ring around the lens must be seated flush against the inner surface of the bubble to
isolate the lens from the IR LEDS. Fasten the dome cover to camera body so that the foam
ring and the dome cover are attached seamlessly.
INSTALLATION*
9
Before Starting the Installation

1. Use the mounting plate or camera itself to mark and drill
the necessary holes in the mounting surface.
2. Pull wires through and make connections.*
3. Adjust the camera’s tilting angles to adjust the camera’s
view. See the next page for more information.
INSTALLATION*
10
Installing the Camera
* NOTE: If necessary, you can route cables through the side opening on the camera’s side
1. Loosen the adjustable nut.
2. Adjust the pan direction [0°~360°].
3. Adjust the tilt direction [0°~90°].
4. Rotate the camera [0~360°] to adjust the lens to the
surveillance angle.
5. Tighten the adjustable nut to complete
the installation.
Installing the Camera’s Angle
0°~90°
Adjust Nut
0°~360°
0°~360°