Dyna-Glo DGA550SSP User manual

Serial Number Purchase Date
ATTACH YOUR RECEIPT HERE
Español p. 63
Français p. 32
5-BURNER GAS
GRILL
MODEL #DGA550SSP/DGA550SSP-D
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday,
or e-mail us at [email protected].
1
ANS Z21.58b-2012
CSA 1.6b-2012
Outdoor Cooking
Gas Appliance
70-10-054 Rev 02/2014

33
P
V
U
O
G
M
N
F
E
D
T
S
W
Q
Z
R
J
K
H
I
B
X
L
Y
A
C
A1
PACKAGE CONTENTS

4
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Bottom shelf 1
BLocking Caster 2
C Caster 2
D Cart Left Side Panel 1
E Cart Right Side Panel 1
F Cart Rear Panel 1
GUpper Door Brace 1
HLeft Door Assembly 1
IRight Door Assembly 1
J Door Handle 2
K Door Handle Sleeve 4
LAA Battery 1
M Main Burner Control Knob 5
NSide/Rear Burner Control
Knob
2
PART DESCRIPTION QUANTITY
O Grill Body 1
PLeft Shelf Assembly 1
QSide Burner Cooking Grate 1
RRight Shelf Assembly 1
S Grease Pan 1
T Grease Cup 1
U Lid Handle 1
VLidHandleBezel 2
WWarming Rack 1
XHeat Tent 5
YCooking Grate 3
Z Tank Shelf 1
A1 CylinderExclusion 1

5
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF
Please read and understand this entire manual before attempting to assemble, operate or install the
product. If you have any questions regarding the product, please call customer service at
1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.
SAFETY INFORMATION
HARDWARE CONTENTS (shownactualsize)
DO NOTuseinanexplosiveatmosphere.Keepgrillareaclearandfreefromcombustiblematerials,
gasolineandotherammablevaporsandliquids.
DANGER
CALIFORNIA PROPOSITION 65
•Fuelsusedingas,oilred,woodburning,andcharcoalburningappliancesandtheproductsof
combustion of such fuels contain chemicals known to the state of California to cause cancer, birth
defects or other reproductive harm. This product contains chemicals, including lead and lead
compounds, known to the state of California to cause cancer, birth defects or other reproductive harm.
Wash hands after handling.

6
CAUTION
• NEVERusecharcoalorlighteruidwiththegrill.
• DO NOT use gasoline, kerosene or alcohol for lighting.
• The LP gas cylinder used with this appliance must be:
 (a)ConstructedandmarkedinaccordancewiththeSpecicationsforLP-GasCylindersof
the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/
CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and
Commision, as applicable; and
 (b)Providedwithalistedoverllingpreventiondevice.
(c) Provided with a cylinder connection device compatible with the connector for outdoor cooking
appliances. This grill is not intended to be used in or installed on recreational vehicles and/or
boats.
• NEVERkeepalledcontainerinahotcarorcartrunk.Heatwillcausethegaspressureto
increase, which may open the relief valve and allow gas to escape.
• ALWAYS open grill lid slowly and carefully as heat and steam trapped within the grill can burn you
severely.
• DO NOTstoreorusegasolineorotherammableliquidsorvaporsinthevicinityofthisoranyother
appliance.
• An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.
• This grill is for use with propane gas only (propane cylinder not included).
• NEVER attempt to attach this grill to the self-contained propane system of a boat, camper trailer,
motor home or house.
• DO NOT attempt to move the grill while it is lit or when it is hot. The casters should be locked when
not moving the grill.
DO NOT place the grill under overhead
combustible construction or awnings.
Minimum clearance from sides and back
of unit to combustible construction is 36
in. (914.4 mm).
NOTE: The installation must conform
with local codes or, in the absence of
local codes, with either the National
Fuel Gas Code, ANSI Z223.1/NFPA 54,
Natural Gas and Propane Installation
Code, CSA B149.1, or Propane Storage
and Handling Code, B149.2.
WARNING
SAFETY INFORMATION
36 in.
(91.4 cm)
36 in.
(91.4 cm)

7
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 50 minutes with two people
Tools Required for Assembly and leak testing (not included): Phillips screwdriver, spray bottle.
SAFETY INFORMATION
• DO NOT use the grill unless it is completely assembled and all parts are securely fastened and tightened.
• Keep all combustible items and surfaces at least 36 in. (91.44 cm) away from the grill at all times.
• DO NOT touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid burns, unless
you are wearing protective gear (pot holders, gloves, BBQ mittens, etc.).
• DO NOT alter this grill in any manner.
• Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or leaks, the
hose must be replaced prior to operating the appliance. The replacement hose assembly will be that
whichisspeciedbythemanufacturer,listedintherepairpartslistinthismanual.
• Move gas hoses as far away as possible from hot surfaces and dripping hot grease.
• Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the grill before
eachuse.Donotobstructtheowofgasorventilationair.
• The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability to properly
assemble or safely operate the grill.
• DO NOT leave a lit grill unattended. Keep children and pets away from the grill at all times.
• DO NOTplacethisgrillonanytypeoftabletopsurface.Thegrillshouldbeplacedonaatandlevel
surface.
• DO NOT use the grill in high winds.
ASSEMBLY INSTRUCTIONS
1. Attach two locking casters (B) to the rear of the
bottom shelf (A) and secure using four plain
washers (BB), four spring washers (CC), and
fourM6x12screws(AA)foreachlocking
caster (B).
1
1
2
CC
B
AA
BB
A
1
Hardware Used
M6x12Screw
Plain washer
Spring washer
x8
x8
x8
AA
BB
CC
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF

8
ASSEMBLY INSTRUCTIONS
3. Turn over bottom shelf (A) and attach tank shelf
(Z)usingeightM6x12screws(AA).
2. Attach two casters (C) to the front of the
bottom shelf (A) and secure using four plain
washers (BB), four spring washers (CC), and
fourM6x12screws(AA)foreachcaster(C).
1
1
1
2
AA
Z
A
3
1
1
2
CC
C
AA
BB
A
2
Hardware Used
Hardware Used
M6x12Screw
M6x12Screw
Plain washer
Spring washer
x8
x8
x8
x8
AA
AA
BB
CC
M6x12 Screw
Qty. 40 M4x10 Screw
Qty. 12 M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE:
Preassembled
with door handle.
Plain Washer
Qty. 16 Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE:
Preassembled
with lid handle.
AA BB CC
FF
EE
GG HH
M6x16 Screw
Qty. 10
DD
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF
M6x12 Screw
Qty. 40 M4x10 Screw
Qty. 12 M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE:
Preassembled
with door handle.
Plain Washer
Qty. 16 Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE:
Preassembled
with lid handle.
AA BB CC
FF
EE
GG HH
M6x16 Screw
Qty. 10
DD
M6x12 Screw
Qty. 40 M4x10 Screw
Qty. 12 M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE:
Preassembled
with door handle.
Plain Washer
Qty. 16 Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE:
Preassembled
with lid handle.
AA BB CC
FF
EE
GG HH
M6x16 Screw
Qty. 10
DD
4.Securecylinderexclusion(A1)tobottomshelf
(A)usingthreeM6x12screws(AA).
1
1
11
1
2
AA
A1
A
4
Hardware Used
M6x12Screw x3
AA
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF

9
ASSEMBLY INSTRUCTIONS
6. Attach the cart left and right side panels (D & E)
by placing the panel keyholes over the screw
heads (AA) on the bottom shelf (A). Slide the
cart side panels (D & E) so that the screw head
is over the smaller part of the keyhole. Thread
the screws (AA) down snug but DO NOT tighten
as some slack will be necessary in following
assembly steps.
5. PartiallyinsertfourM6x12screws(AA)intothe
bottom shelf (A).
11
11
2
D
E
AA
6
A
AA
A
5
Hardware Used
M6x12Screw x4
AA
M6x12 Screw
Qty. 40 M4x10 Screw
Qty. 12 M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE:
Preassembled
with door handle.
Plain Washer
Qty. 16 Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE:
Preassembled
with lid handle.
AA BB CC
FF
EE
GG HH
M6x16 Screw
Qty. 10
DD
Hardware Used
M6x12Screw x2
AA
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF
1
1
2
AA
D
E
7
7. PartiallyinserttwoM6x12screws(AA)intothe
cart left and right side panels (D & E).

10
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
M6x12Screw
M6x12Screw
x3
x4
AA
AA
2
2
11
3
AA
G
E
D
9
222
1
1
3
F
AA
A
D
E
8
8. Attach the cart rear panel (F) by sliding the
keyholes in the cart rear panel (F) over the
inserted screws. Slide the cart rear panel (F) down
to meet bottom shelf (A). Secure the cart rear
panel (F) to the bottom shelf (A) with three screws
(AA). Tighten all screws, including the two screws
in cart side panels (D & E).
9. PartiallyinsertfourM6x12screws(AA)intothe
cart side panels (D & E). Attach the upper door
brace (G) by sliding the cut-outs in the upper door
brace (G) over the four screws (AA) and tightening
all four screws (AA).
1
1
2
H
J
K
GG
10
10.RemovepreassembledM4x10screws(GG)
from the door handles (J). Insert two door handle
sleeves (K) into the holes located on the back
oftheleftdoorassembly(H).InserttwoM4x10
screws (GG) into the door handle sleeves (K)
and into the threaded holes in the door handle
(J). Tighten the screws. Repeat with right door
assembly (I).
Hardware Used
M4x10Screw x4
GG
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF

11
ASSEMBLY INSTRUCTIONS
11
2
U
V
HH
O
12
1
1
2
DD
H
D
11
11. Attach the left door assembly (H) to the cart
body by aligning the holes in the hinge of the
left door assembly (H) with the holes in the cart
leftsidepanel(D).SecureusingfourM4x10
screws (DD). Tighten all screws. Repeat with
right door assembly (I).
12. Remove preassembled screws (HH) from the lid
handle (U). Attach the lid handle (U) by inserting
twoM6x25screws(HH)frominsidethelidofthe
grillbody(O),throughthelidhandlebezels(V),
into the lid handle (U) and tightening securely.
Hardware Used
Hardware Used
M4x10Screw
M6x25Screw
x8
x2
DD
HH
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF
M6x12 Screw
Qty. 40
M4x10 Screw
Qty. 12
M6x20 Screw
Qty. 4
M4x10 Screw
Qty. 4
NOTE: Preassembled
with door handle.
Plain Washer
Qty. 16
Spring Washer
Qty. 16
M6x25 Screw
Qty. 2
NOTE: Preassembled
with lid handle.
AA DD EE
GG HH
BB CC
M6x16 Screw
Qty. 10
FF
O
M
N
13
13. Slip main burner control knobs (M) and side/
rear burner control knob (N) onto the valve
stems located on the front control panel of the
grill body (O).