DYNABREEZE FA-26243 Planning guide

2400MM IP65 OUTDOOR WALL FAN
Thank you &
Congratulations on
the purchase of your
Dynabreeze IP65 Dust &
Water Resistant Industrial
Outdoor Wall Fan
To nd out more information on this product,
please visit www.dynabreeze.com.au or contact:
Tradeware
Address 45 Birralee Rd, Regency Park SA 5010
Phone
au 1300 658 494 nz 0800 689 960
Email [e-mail]
Website www.tradeware.com.au
T
SPECIFICATIONS Model FA-26243
Voltage 110-240
Frequency 50/60Hz
Motor Power DC 40W
Max Speed 1250rpm
Fan Speeds 12
Wind Modes 3: Normal, Natural, Sleep
Timer 1-9hrs
Diameter 40cm
Product Weight 5.6kg

INSTRUCTION USER MANUAL & WARRANTY 3
OPERATION CONDITIONS & SAFETY PRECAUTIONS
WARNING: When using electrical appliances, basic safety precautions should be
followed to reduce the risk of re, electric shock and injury to persons or property.
PLUGGING IN OUTSIDE: This fan can only be
plugged into a 10 amp waterproof outdoor
power point which will have a water tight
cover - it is never to be plugged into a non
waterproof power point when used outside.
NOTE: Always engage an electrician to
install a waterproof outdoor power point.
• To avoid a hazard due to instability of the
appliance, it must be placed on an even,
at surface.
• Do not operate this appliance with a
damaged cord or plug after the appliance
has been damaged in any manner.
• Before each use, check for any damaged
parts, and have it replaced or repaired by
the manufacturer or a qualied electrician.
• Connect to properly grounded power outlet
only. No other appliance should be plugged
into the same outlet.
• Do not run the power cord over heat
insulators. Do not cover the cord. Keep cord
away from trac areas.
• Switch o and unplug the appliance before
moving, cleaning or making any repairs or
servicing.
• Keep safety guards/grilles in place and
do not operate the machine with them
removed.
WARNING: Touching of moving blades can
cause serious injury.
• Do not insert ngers or anything through
the grille.
• Do not wear jewellery or loose clothing that
could be caught by the rotating blades.
• Never leave the appliance running
unattended, turn the power o.
WARNING: Exercise caution and use
reasonable supervision when appliance is
used near children to ensure that they do
not play with the appliance.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge.
• Keep the area around the fan clear and
suitable distance from objects that may be
suctioned into the fan.
Taking care of your Wall fan
To keep your wall fan in its best condition
and to protect as much as possible from
exposure to moisture in the air, dust and
possible rusting, we highly recommend
when your fan is not in use that you wipe it
dry with a cloth to ensure no water remains
and place a cover over it.

4400MM IP65 OUTDOOR WALL FAN
OPERATION CONDITIONS & SAFETY PRECAUTIONS
This fan is IP65 classied, which means it is dust tight and has protection against hosing
jets of water from all directions. This fan is not protected from being immersed in water.
See the Ingress Protection (IP) Rating Guide below for more information.
Protected against a solid
object greater than 50 mm
such as a hand.
SOLIDS
1
2
3
4
5
6
WATER
Protected against a solid
object greater than 12.5
mm such as a finger.
Protected against a solid
object greater than 2.5 mm
such as a screwdriver.
Protected against a solid
object greater than 1 mm
such as a wire.
Dust Protected. Limited
ingress of dust permitted.
Will not interfere with
operation of the equipment.
Two to eight hours.
Dust tight.
No ingress of dust.
Two to eight hours.
Protected against vertically
falling drops of water. Limited
ingress permitted.
1
2
3
4
5
6
Protected against vertically
falling drops of water with
enclosure tilted up to 15
degress from the vertical.
Limited ingress permitted.
Protected against sprays of
water up to 60 degrees from
the vertical. Limited ingress
permited for three minutes.
Protected against water
splashed from all directions.
Limited ingress permitted.
Protected against hosing
jets of water from all
directions. Limited ingress
permitted.
Protected against strong jets
of water from all directions.
Limited ingress permitted.
7
Protected against eects of
immersion in water between 15
cm and 1 m for 30 minutes.
8
Protection against the eects
of immersion in water under
pressure for long periods.
6
IP 5
IP (INGRESS PROTECTION)
FULL RATING GUIDE

INSTRUCTION USER MANUAL & WARRANTY 5
PARTS IDENTIFICATION
1 Motor Head
2 Motor Neck
3 Wall Mount Plate
4 Remote Control
4
1
2
3

6400MM IP65 OUTDOOR WALL FAN
ASSEMBLY & OPERATION
Drill
Tools required
1. Locate the bag that contains the wall
mounting hardware.
2. Select location to place it on the wall.
NOTE: Ensure power supply is nearby and
power cord is not too tight or in a position to
interfere with oscillating function.
3. Ensure the wall is suitable to support
the fan:
- If mounting to a plastered wall, then the
wall mount must be tted to a stud behind
the plaster wall using the screws provided.
- If mounting to a brick or masonry wall,
ensure plugs and screws used are suitable.
- Suitable xings must be used and must
support a minimum of 8.5kg. Always check
the suitability of plugs and screws for
installation before use.
NOTE: The fan must be mounted vertically.
TIP: To assist in mounting the fan, a wall
mounting drilling diagram is provided on
the last page of this manual. Pre-drilling
and xing the mounting screws can be
performed without having to hold the fan
in place.
Assembling the fan
plaster
studs
brick
/
masonry

INSTRUCTION USER MANUAL & WARRANTY 7
Operating the fan
4. Using the wall mounting diagram on the
last page of the manual, insert the 4 screws
into the wall to a depth of approx 4cm,
leaving some of the screw out from the
wall. Then mount the wall fan plate over the
remaining screw area and slide down until
safely in place. Finally, tighten the screws
so the wall fan is securely on the wall.
The fan assembly is now complete.
Assembling the fan cont.
ON/OFF SPEED TIMER SWING
The fan can be operated using the control
panel on the unit, using the remote control
or using the Smart Life app on your phone.
Operating the control panel
Press
button to
turn fan
ON/OFF
LED indicator to show the
speed/timer/wind modes
Fan speed
1-12 speed
settings
Press to activate
timer. Fan turns o
after the set time,
between 1-9hrs
Press to
activate
oscillation when
fan is on

8400MM IP65 OUTDOOR WALL FAN
Operating with WiFiOperating the remote
To pair the unit with your Wi-Fi please
complete the following steps:
1. Download app
Download and install the app ‘Smart Life’
from the App store (iOS) or Play store
(Android).
2. Create account or login
Create a new account if you are a new user.
Follow the prompts to set-up and complete
your account.
Login with your account details if you have
an existing account.
NOTE: You must agree with the Privacy
Policy in order to use the app.
3. Pairing a device
Turn on bluetooth and ensure you’re
connected to Wi-Fi 2.4Ghz.
Open the app and tap ‘add device’
Press button to
turn fan ON/OFF
Press to activate
oscillation when
fan is on
Press to activate
timer. Fan turns o
after the set time,
between 1-9hrs
Remove the protective lm strip from remote
to activate battery. If there is no battery,
insert a new one, CR2032.
To sync remote to the unit, turn the unit on.
For 2 seconds push the timer and swing
button together until you hear a beep sound.
Then push the on/o button on the remote
and it is now ready to use.
If it fails, the above steps may need to be
repeated as sometimes the signal is not
strong enough.
Modes: natural, normal, sleep
NOTE: modes can only be operated with
remote control or app - not on the unit itself.
Press button for
3 seconds to set
the fan mode and
change the speed
by pushing +/-

INSTRUCTION USER MANUAL & WARRANTY 9
Power on the fan and push on/o button
for 5 seconds - you should see the fan
appear on the app after hearing a beep.
Tap add fan device and follow the
instructions to connect your Wi-Fi and fan
device.
After connecting successfully you’ll have
the option to change the name of the
device.
You can now operate the device using the
app. A new page should now show in the
app showing controls for operating the
device.
If the above instructions do not work, check
the following and retry steps another time.
1. Fan device is in close proximity to the Wi-Fi
router.
2. Ensure the Wi-Fi network is 2.4GHz
3. The Wi-Fi password is correctly entered
and the same Wi-Fi network is being used
on the mobile device.
4. The fan device is in pairing mode.
5. Check your Wi-Fi for stable internet
connection.
If it still isn’t working, visit
www.ismartlife.me for more information and
troubleshooting guides. (See end of manual
for basic troubleshooting assistance).
Operating with WiFi
Operating the fan cont.
Oscillate
Oscillation can be easily managed using the
control panel, remote or app.
The oscillation range is 90°
Adjustments: Vertical Tilt Adjustment
Grip the top and bottom of the grille rmly
and tilt to the desired position. If you have
diculty adjusting the vertical tilt, loosen
the tilt adjustment screw slightly to give you
more exibility and then re-tighten.

What can I do if pairing fails with
my fan device?
1. Check to ensure your mobile device is connected to the 2.4GHz Wi-Fi
network, refer to below for how to check the Wi-Fi frequency.
2. Check password is correctly entered and the mobile is using the same
Wi-Fi network.
3. Check the fan device is in pairing mode, the LED indicator should be rapidly
blinking to indicate pairing mode.
4. Check the internet connection is stable and works by testing on a website.
If problems persist, please visit www.ismartlife.me or contact the
Dynabreeze Service Team on 1300 658 494 for further assistance.
Does the fan device support
5GHz wireless connections? No, 5GHz wireless connection is not currently available for the fan device.
How do I know if my network is
under 2.4GHz Wi-Fi?
For iOS users:
1. Go to your settings and tap Wi-Fi. The sux of your Wi-Fi network should
end in either 2.4G or 5G.
2. If you still cannot determine if you are on a 2.4GHz network, you can obtain
the information via your router. For more information on this process, please
consult your specic router’s manufacturer or user manual for more details.
For Android users:
1. Go to your settings and tap Wi-Fi.
2. Tap the connected Wi-Fi network and it will show the Wi-Fi frequency.
When pairing, should my fan
device or mobile be in the same
room as the Wi-Fi router?
No, they do not need to be in the same room as long as they are connected to
the same Wi-Fi network.
What if I forget my Smart Life
app account password details?
If you forget your password, you’ll have the opportunity to reset it by tapping
‘forgot password’ and following the prompts to reset your password.
TROUBLESHOOTING

WARRANTY
Under the Australian Consumer Law (ACL) or NZ Consumer
Guarantees Act (CGA), you are entitled to a 12 month
replacement or refund for product failure and compensation
for any other reasonably foreseeable loss or damage.
Tradeware oers a 3 Year Warranty. The additional
warranties, terms and conditions are outlined on the
website www.dynabreeze.com.au under the Support tab.
Under Support you can also Register your product upon
purchase and enjoy the peace of mind of knowing your
product is registered should anything happen.
If the unit fails to operate eciently, is broken or other
problems arise, unplug and do not operate. Ask for advice by
calling Tradeware.
To Claim, the fan should be returned to the place of purchase
or via the website within the warranty period.
Such claims must include:
• Details of the alleged defect or fault;
• Evidence of the claim; and
• Proof of purchase documentation which clearly shows the
date and place of purchase.
Please visit www.dynabreeze.com.au for more details
Trad e wa r e
45 Birralee Road, Regency Park
South Australia 5010
[e-mail]
1300 658 494
www.tradeware.com.au
Due to continual product development, please note the information and content
provided may not be nal and may be subject to changes.
Please
Recycle

Wall Mounting - Drilling Diagram
Tear out this page to use as a drilling guide