DYNABREEZE FA-26144 User manual

2400MM IP65 OUTDOOR PEDESTAL FAN
Thank you &
Congratulations on
the purchase of your
Dynabreeze IP65 Dust &
Water Resistant Industrial
Outdoor Pedestal Fan
To nd out more information on this product,
please visit www.dynabreeze.com.au or contact:
Tradeware
Address 45 Birralee Rd, Regency Park SA 5010
Phone au 1300 658 494 nz 0800 689 960
Email [e-mail]
Website www.tradeware.com.au
SPECIFICATIONS Model FA-26144
Voltage 110-240
Frequency 50/60Hz
Motor Power DC 40W
Max Speed 1250rpm
Fan Speeds 12
Wind Modes 3: Normal, Natural, Sleep
Timer 1-9hrs
Diameter 40cm
Product Weight 9.8kg
T

INSTRUCTION USER MANUAL & WARRANTY 7
ON/OFF SPEED TIMER SWING
The fan can be operated using the control panel on the unit, using the
remote control or using the Smart Life app on your phone.
Operating the control panel
Operating the fan
Press button to
turn fan ON/OFF
Press button to
turn fan ON/OFF
LED indicator to
show the speed/
timer/wind
modes
Fan speed 1-12
speed settings.
Press button 2
seconds to change
fan mode
Press to activate
oscillation when
fan is on
Press to activate timer.
Fan turns o after the set
time, between 1-9hrs
Press to activate
timer. Fan turns o
after the set time,
between 1-9hrs
Press to activate
oscillation when
fan is on
Operating the remote
Remove the protective lm strip from
remote to activate battery. If there is no
battery, insert a new one, CR2032.
To sync remote to the unit, turn the unit
on. For 2 seconds push the timer and
swing button together until you hear a
beep sound.
Then push the on/o button on the
remote and it is now ready to use.
If it fails, the above steps may need to be
repeated as sometimes the signal is not
strong enough.
Modes: natural, normal, sleep
NOTE: modes can be operated with
remote control, app and on the control
panel.
Press this button to set the
fan mode
and change the fan speed
by pushing +/-