DYNABREEZE FA-29114 Guide

TRADE QUALITY SINCE 1995
MODEL FA-29114
Instruction
User Manual
& Warranty
350MM LOW PRESSURE
CAUTION: Read the Assembly & Safety
Instructions before operating and
retain for future reference
MISTING RING
F
A
C
T
O
R
Y
W
A
R
R
A
N
T
Y
1 YEAR

2350MM LOW PRESSURE MISTING RING
Thank you & Congratulations on the purchase of
your Dynabreeze 350mm Low Pressure Misting Ring
To nd out more information on this product,
please visit www.dynabreeze.com.au or contact:
Tradeware
Address 45 Birralee Rd, Regency Park SA 5010
Phone au 1300 658 494 nz 0800 689 960
OPERATION CONDITIONS & SAFETY PRECAUTIONS
SPECIFICATIONS
WARNING: Please read before operating. Basic safety precautions should be followed to
reduce the risk of re, electric shock and injury to persons or property.
• Beforettingthemistingringtothefan,
connecttoahoseandcheckforanyleaks
toensurethettingsaresealedcorrectly.
Oncetherearenoleaks,themistingring
canbeplacedontothefaceofthefan.
• Thisproductisintendedforusewithmains
pressurewater.
• Ensurefanisonbeforeturningonthe
watersupply.
• Ensurethenozzlesarefacingoutandaway
fromthefanmotor.
• Ifyouareinanydoubtaboutwhetherthis
productisproperlyinstalled,contactthe
manufacturer.
• Removewatersourcebeforemovingor
cleaningit.
• DO NOTtouchanyelectricalswitchorplug
withwethands.
• DO NOTdroporinsertanyobjectsinto
openingsintheproduct.
Model FA-29114
MaxFlow 1.892LMP
Min-MaxWorkingPressure 30-125psi
MaxTemperature 30ºC
NozzleOrice 0.3mm
NozzleThread 10/24unc
O-RingSize Inner diameter 4mm/Thickness 1mm
DiameterofRing 350mm
ProductWeight 0.5KG
Email [e-mail]
Website www.tradeware.com.au

INSTRUCTION USER MANUAL & WARRANTY 3
Thank you & Congratulations on the purchase of
your Dynabreeze 350mm Low Pressure Misting Ring
PARTS IDENTIFICATION
ASSEMBLY & OPERATION
1. Removeallcontentsfromtheboxand
checkallpartsareincluded.
2. Insertthecombinedpipeandlterintothe
t-junctioncentrepiece.
3. Securethemistingringcentrallyontothe
faceofthefanusingthesuppliedcable
tiesandtrimoanyexcess.Ensurethe3
nozzlesarefacingstraightout.
4. Connectthehoseconnectiontothe(o)
watersupplyandturnonthefan.
5. Oncethefanison,thewatersupplycanbe
turnedon.Ensurethatanywindisbehind
thefan.
6. Toturnothemist,rstturnothewater
supplyandthenturnothefantoensure
waterdoesnotsprayontothefanmotor.
NOTE: Ifthenozzledripsafewactionscan
betakensuchastighteningthenozzleas
muchaspossibleorincreasethewaterow.
Low Pressure Nozzle
T Junction
Centre Piece
1.5m Connection
Pipe
Filter
Snap Fit Hose
Connection
Transfer Male
Connecter
Slip Lock Connecter
O-Ring
Clamps
Internal
Claws

WARRANTY
SPARE PARTS
Dynabreeze oers a 1 Year Warranty according
to Australian Consumer Law. Please refer to the
website www.dynabreeze.com.au or contact us
for more details.
Spare parts can be purchased separately by
calling Tradeware.
Model Code Description
FA-29114A Filter
FA-29114B 2.5m Pipe
FA-29114C 3 x Slip lock connecters,
3 x Nozzle,
1 x T-Junction centre piece
FA-29114D 3 x Nozzles
Tradeware
45 Birralee Road, Regency Park
South Australia 5010
[e-mail]
au 1300 658 494
nz 0800 689 960
www.tradeware.com.au
Due to continual product development, please note the information and content
provided may not be nal and may be subject to changes.
Please
Recycle