Dynello Accu Winder User manual

BEST PRACTICE
Read instruction before use
• Only use the tool for the purpose as described in the accompanying
manual.
Always follow recommendations for use
• Recommended use: Use only this tool in conjunction with a
handheld battery-powered power tool with a maximum speed of
400 RPM.
• Always rewind at the lowest speed of the power tool.
• Always make sure that the cargo strap is assembled so that the
hook of the cargo strap cannot grasp surrounding objects.
• When rewinding, pay attention to the hook on the cargo strap and
slow down the winding speed as the hook approaches the tool.
• Always hold and control the tool with one hand.
Never overload the tool
• Always rewind up directly (vertically) to facilitate rewinding. Do not
drag the cargo strap on the ground or over goods during rewinding.
The hook may risk grabbing surrounding objects.
• Avoid rewinding very twisted cargo straps.
Storage of tool
• After use, always make sure the tool is kept dry.
• After use in the muddy and salty (near port) environments, wipe the
tool with a clean cloth.
• When rewinding dirty cargo straps, wipe the tool with a clean cloth.
Tool Power tool
(RS0301) (not Dynello product)
RS0301 Dynello Accu Winder
250120-2 1 / 2

SET CORRECT TORQUE
• When using the tool for the first time, set the torque of the power
tool to the lowest setting before you are aware of the torque
sufficient to rewind the cargo strap.
• Recommended torque setting: Set the power tool torque setting to
3 out of 10.
SET CORRECT SPEED
• Always apply the lowest speed setting to the power tool.
• Recommended maximum power tool speed: 400 RPM.
• Familiarize yourself with the power tool's speed, control of push
button and speed settings before starting a rewinding application.
Tool Power tool
(RS0301) (not Dynello product)
MAX. 400 RPM
RS0301 Dynello Accu Winder
250120-2 2 / 2