E.C. Woods Belmar Balcony Bar Stool User manual

Assembly Instructions E.C. Woods, Inc. Outdoor Furniture
BALCONY BAR STOOL
(a)
STEP 1: (a) Lay all pieces on a smooth soft surface such as cardboard or carpet to help avoid scratching. We suggest
using a 6” #2 square drive bit to fasten all screws (available at your local hardware store). Be careful to not over tighten
any of the fasteners.
Tools Needed
Cordless Drill
6” #2 Square Drive Bit

STEP 2: (b) (x2) Insert the seat skirts (pocket hole in the middle) and footrests in to the mortises in one side assembly
and fasten with the 1 ½” stainless steel round head screws provided. (c) Place the other side assembly face down and
rotate the subassembly on to it then insert the seat skirts and footrests in to the mortises in the side assembly and
fasten with the 1 ½” stainless steel round head screws provided.
(b) (c)
STEP 3: (d) Line the bar stool top up by placing the top of the legs into the mortises in the bottom of the bar stool top.
(e) Fasten the bar stool top thru the screw pockets using the 1 ½” round head stainless steel screws provided.
(d) (e)
ecwoutdoorfurniture.com