E.C. Woods BALCONY TABLE User manual
Assembly Instructions E.C. Woods, Inc. Outdoor Furniture
BALCONY TABLE
(a)
STEP 1: (a) Lay all pieces on a smooth soft surface such as cardboard or carpet to help avoid scratching. We suggest
using a 6” #2 square drive bit to fasten all screws (available at your local hardware store). Be careful to not over tighten
any of the fasteners.
Tools Needed
Cordless Drill
6” #2 Square Drive Bit
Tape Measure
STEP 2: (b) Place the cross bars into the mortises of a leg assembly. (c) Fasten the cross bars with the 3” stainless steel
flat head screws provided. (d) Insert the cross bars in to the other leg assembly and fasten with the 3” stainless steel flat
head screws provided. (e) Place the table top upside down then center the assembled table base between the table top
skirts.
(b) (c)
(d) (e)
STEP 3: (f) Secure the Leg Assembly to the bottom of the table top using the 1 ½”stainless steel flat head screws
provided. (g) Fasten the feet to the leg assembly with the 1 ½”stainless steel flat head screws provided.
(f) (g)
ecwoutdoorfurniture.com
Table of contents
Other E.C. Woods Indoor Furnishing manuals
E.C. Woods
E.C. Woods EZ GLIDE User manual
E.C. Woods
E.C. Woods PORT ROYAL User manual
E.C. Woods
E.C. Woods PORT ROYAL User manual
E.C. Woods
E.C. Woods ACADIA BAR HEIGHT SWIVEL CHAIR User manual
E.C. Woods
E.C. Woods Belmar Balcony Bar Stool User manual
E.C. Woods
E.C. Woods CALISTOGA COFFEE/END TABLE User manual
E.C. Woods
E.C. Woods ST. CROIX User manual
E.C. Woods
E.C. Woods FREEPORT User manual
E.C. Woods
E.C. Woods ASHEVILLE END User manual
